Your cart is empty.
Your cart is empty. The Eagle Equalizer eliminates hyper flash when installing LED turn signals on pre-2013 Harleys by slowing the turn signal flash rate to the normal speed. Hyper flash is when the turn signals will start flashing faster than normal after a few seconds. The Eagle Equalizer has Harley OEM connectors that plug directly into the wiring harness underneath the seat in minutes. It does not produce heat or put a load on the electrical system under use. Only one unit is needed for either 2 or all 4 turn signals. Can also be used with a combination of LED and incandescent turn signals. Fits the following models only:
‘96 - ‘10 Softails
‘97 - ‘11 Dynas
‘99 - ‘03 Sportsters
‘06 - ‘09 Street Glide
‘97 - ‘13 Touring Models (Electra Glide, Ultra Classic, Ultra Limited, Road King models)
‘97 - ‘09 Road Glide Models
‘10 - ‘13 Tri-Glide.
Juan Perez
2025-09-04 11:17:18
The media could not be loaded.
Irv Miller
2025-08-05 12:52:59
I am a big bright light guy and the LED technology drop in available is great but it causes issues with some older bikes. I had the flashy blinkers but they still worked so I was not bent about that. What my issues was it kept tripping an alarm code and there was a key symbol in odometer dashboard that would come and go. I had a local HD dealer do a service and diagnose the code. He reset the code error but it would come back and was referencing alarm and lights. Well the models with alarms flash the lights and I guess the LED replacements were throwing off the alarm system. This set up seemed to fix it both flashy blinkers and the alarm error. Very pleased with this product.
A. Hunter
2025-07-09 10:20:28
Easy to install on my 2009 flhtcu
George E.
2025-06-21 14:52:38
My addition of LED front signals caused the flashers to blink very quickly after about 3 seconds. I'm tired of splicing into the wiring harness, so this was nice. The electronic unit is a little large, and the harness has 2 extra plugs and additional wiring. On a Sportster there isn't much room, but with a little thought to the routing it fits well. The best part is that you plug it into the bike's wiring harness and it's done. No cutting those wires or trying to pull the pins and make a nice splice. No soldering, shrink tape, electrical tape, butt connectors etc. Instead of an hour messing with the wires, just put the components behind the battery cover on the side, run the plugs under the frame and put the seat back on.
Boston Transit
2025-06-12 10:33:54
This item was installed and originally worked. Not only 6 months after it failed and bike lights are hyper flashing. To say the least 80 bucks for 6 mo is not good for a product longevity.
Jeff
2025-06-05 18:55:30
Product works as described and no synchronization required. Only issue is it messes up the factory security by causing the "armed" flash to continue repeatedly until you get the key fob far enough away from the bike. Now also causes headlight to flash with security instead of just signals.Hoping this doesn't cause any battery drain issues, but will come back with an update in a few weeks.
Jason Trisdale
2025-05-23 14:47:11
Fixed hyperflash on two thousand eight sportster. Nice product and Let's plug and play. There's not much room under the seat on a sportster so seat fitment is pretty tight. Probably could have got by with a really cheap one. spent the extra money on this one.
Josh S.
2025-05-07 18:26:21
Perfect accessory (and absolutely needed) for those whom are changing from incandescent to LED lighting
Robert Pageau
2025-04-22 18:34:37
Parfait fonctionne bienReste juste a savoir si ca va toffer
NoWa
2025-04-04 14:09:36
I installed it on Fatboy low 2010 because I got hyper flash when I install LEDs turn signals I thought this device going to solve the hyper flash and the key symbol on the dashboard it solve the hyper flash and turn off the key symbol on the dash, but my security alarm start to be weird if I turn off the motorcycle and stand beside it it will not close the security. make the turn signal flash every five seconds for no reason I don’t recommend it.
Howard R.
2025-03-06 16:44:43
Took about 5 minutes to install. Eliminated my hyper flashing problem. Thank you
Tai Smith
2025-02-19 15:38:50
Works fantastic
Sidney F Krick
2025-02-06 15:43:57
Works as described . No heat
Recommended Products
