Your cart is empty.
Your cart is empty.Product Description
Ace
2025-09-05 21:02:58
Product came well packaged and is heavy duty enough for most 3 point tractor implements (boom, hay spear, etc.) use with my Bobcat. Nice welds and $100's less than similer sold localy. Also like the additional receiver for standard Reese style hitches, looks like medium weight use. No issues and works perfectly.
kalub
2025-08-24 11:17:04
Pretty dang solid I will have to say for the sweat shop welders in dingdong. Made a skid steer attachment with it and it’s solid as heck.
Justin Rohr
2025-08-23 10:51:28
Built strong with 1/4 plate with a 3/8 top rib for the SSQA.Only issue I had is it being a smidge to narrow for my SSQA mountWelds aren't show worthy but also not complete garbage. Better than the average farm job .Main thing I'm going to add is some welded on nuts and us bolts to lock the lower arms in place from sliding
Jordan Evans
2025-08-20 12:30:02
Everything except the top bar appears to be on point.Top bar is too small, as many others have noted. I cut the center of the bar out and welded it to the remaining sides to widen them enough to ensure the quick attach doesn't pop out (it does otherwise, as it is barely engaged). Not heat treated steel, so go thicker to get the strength needed.But: if you view this as a quick startung point and expect some modifications i would say that for the money and free shipping it is a good value.
Flatbed
2025-08-08 18:21:40
Great value works as intended
Lisa T.
2025-08-03 11:10:53
Specs are not close tolerance. When weight is on top link the fixture flexes allowing the plate to detach. Concept is good but tolerances are not acceptable. The plate needs more support or additional strengthening to prevent the flexing. Welds look questionable. Had a welder look at it and he suggested it be returned and get money back.
WHTG
2025-05-28 11:54:56
Works great, some people in reviews said they had to work on it to get it to work.Fit great on my machine.Good welds, I was pleased.Thanks
Bully breeder
2025-05-18 14:36:02
Okay…The welding looks good, but as far as the overall quality its not great it fits super lose on the machine. I already started building my implement or i’return it. It’s not a small amount of play either it’s so bad the pins barely grab it. I bought a different brand similar price and it was a prefect fit. So all in all the manufacture did a poor job.
Marie-Éloïse Dion
2025-04-02 11:36:51
Â
Customer
2025-03-18 10:22:08
I bought 3, haven't used them yet, I know they will fit my AGT 23... I have measured closely. I'm building some attachments. For the time involved to make these.... cheap easy buy. Good quality 1/4 inch steel, nice welds!! Now to find some time... The top overhang needs to be notched out or trim 1/4" off as it collides with the cylinder mount... And grease zero on an AGT LRT 23....Other than that they seem good!
Jay Wiens
2025-03-04 17:22:20
VERY well built, but.....I took a chance this would fit my 'JQ400 mini trackloader', so I could fab up a lift platform using the steel frame tubing (cage), that the loader was shipped in. It was close....The mount plate is VERY nicely made, and it didn't claim to fit a Chinese mini loader. I just don't know where/how to get one that would fit my machine well. I don't know if there are standard sizes to look for?This mount plate is about a half inch too large all three directions for my machine. With some cutting and welding, I've made it work. I just would like to find this quality of mount plate to fit my machine from the getgo.There's lots of these Chinese mini loaders hitting our shore, so there's probably more market for plates and accessories for them than '$$$$ name brand $$$$' equipment.
Ken Williams
2025-03-02 17:08:54
I haven't done anything with it yet, I just got it today. It looks solid and look like quality welds, better than the plate that is on the OEM bucket and the one on a hitch receiver adapter that I bought. I will have to cut a little off the part that wraps over the top in the center because it hits the curl cylinder bracket and the whole thing does not go down all the way. I'll probably buy a couple more of these.
Mr-Fiero
2025-01-06 11:52:09
Converted this for the Chinese mini skid steer.all measurements are good, except the height. with a little work on the bottom to allow the pins to reach, this worked perfectly for my application.If you have a small welder, its an easy fix. everything else fits.
Recommended Products