Your cart is empty.
Your cart is empty.The Edelbrock Fuel Line is specifically designed for Edelbrock square-bore carburetors. This fuel line is made of steel and comes with an elegant chrome finish. They feature 3/8 barbed end inlet and does not include fuel filters.
Eric
2025-09-01 18:20:44
Installed with no leaks, I needed something to allow me to remove the space between my carburetor and my air filter so I could clear my hood. This did the trick and it looks nice.
Matt
2025-08-11 17:10:01
Great Edelbrock quality!
halil Ibrahim Biricik
2025-06-29 15:41:27
I like it
Douglas Snyder
2025-06-03 12:57:45
Well made and fit perfectly under Edelbrock linkage. Wrapped both threaded parts with Teflon tape and No Leaks.
RW
2025-05-29 11:17:18
It fit and served the purpose of re-routing the fuel line down and under the electric choke, However the fitting leaked at both the carburetor and the small plug (for a pressure gauge). I fixed these problems by substituting copper washers at the carburetor fitting and a brass plug for the one that came with this kit. After that - no leaks and it allowed me to use my stock air cleaner with only a slight modification. The leakage seems to be a frequent complaint with this item. You can only tighten down that connection at the carburetor so much until your near the point of stripping the threads in the aluminum carb. Better to try some copper washers that crush/seal a little easier that the ones in the kit.
MR. Annonymous
2025-04-18 11:35:48
I intended to run this on an Edelbrock Performer 600 carb on an Edelbrock Performer AMC V8 intake. Sadly, the fuel inlet comes out right into the coil bracket mounting hole, leaving me no way to install a fuel hose. Otherwise, it was of good quality with a nice, even job of chrome plating with no areas of light chroming. I wish I could have used it. It may be a better fit on an engine without a coil bracket on the front of the engine, like a SBC.
Chad Peterson
2025-04-10 15:04:30
Installed easy no leaks worked great
Rioricken71
2025-02-04 13:51:01
This helps with ford engines as it put the fuel line in a better spot
Bern
2025-01-19 13:19:33
Worked as expected. Good quality part.
Cesar
2025-01-08 11:51:33
Este producto es muy importante si actualizas tu carburador pero es de excelente calidad y marca
unbekannter
2024-12-26 17:02:03
Ware ok
Customer
2024-12-18 18:55:34
Excellent fit and finish. I was surprised to learn it had a port for a fuel pressure gauge. The kit does include a black plug which is installed in the picture if you don’t have a gauge. Highly recommended.
Guillermo Tovar
2024-11-23 09:11:29
Si usas un carburador Edelbrock, esta lÃnea de combustible es una de las primeras cosas que debes comprar para evitar tener mangueras de goma expuestas en el compartimiento del motor. Es sumamente fácil de instalar, y mejora mucho el aspecto de tu motor.Nota: Instalar sólo con bombas de combustible mecánicas ubicadas en la parte frontal del motor, ya que en caso de bomba eléctrica en tanque de combustible, hay que enrutar hacia el firewall, de forma inversa
Recommended Products
$34.99
$ 16 .99 $16.99