Your cart is empty.
Your cart is empty.Product Description
Features
Digital Display
Keep an eye on temperature information with this handy display
Holds Oversized Kegs
Due to its large interior, this keg refrigerator is able to hold a larger oversized bevel edged kegs. It can also fit full size half barrel kegs, pony kegs, slim quarter kegs, or up to three sixth barrel kegs.
Easy Mobility
The rolling casters make it easy to move the kegerator from room to room as needed, or while entertaining.
Mountable CO2 Tank
Rubber plug in back of fridge can be removed to move the CO2 canister from inside the fridge to the rear-mounted canister holder or left in to ensure proper insulation
Keg Types & Capacities
Beer Components Included:
- Stainless Steel Column Dual Faucet Tower
- Chrome Plated Brass Faucet (2)
- Domestic “D” System Sankey Coupler (2)
- Single Gauge Regulator
- 5ft of 3/16in I.D. NSF Approved Beer Line (2)
- 5ft of 5/16in I.D. Vinyl Air Line (3)
- 5lb Aluminum CO2 Tank (Empty)
- T-Fitting 5/16in. I.D.
- Integrated Drip Tray
- Black Tap Handle (2)
- Coupler Washers (2)
Since 2004 EdgeStar has been an industry leader in the specialty appliance field, developing products designed to elevate your lifestyle. We focus on providing products at a good value with an emphasis on quality construction and attentive customer support.
Pat
2025-08-27 21:41:49
Great purchase, easy temp control. Easy to drill and modify if needed for any reason. I use a 1/6 and 1/4 slim at once with plenty of room
Kimberly
2025-08-12 17:15:02
When COVID kept us all locked up we were really missing our draft beer so purchased this awesome item to help us out! It works extremely well however we did upgrade to a dual regulator and plan on changing out a few other parts in the near future. We use it with two 1/6 size kegs and kept the CO2 inside the fridge. We really wanted to fit 3 kegs but it's just too cramped. My only complaint with this, after several months of use, is that the valves will clog up/stick to the point we have to take it apart and soak in warm soapy water. 2nd, there is no gauge for the CO2 so I highly recommend the purchase a 2nd CO2 for when this runs out. Still, this has been a great purchase for us and we are very happy with it.
Mercuri
2025-06-25 10:27:41
Lets get this out of the way: This kegerator has its faults. Mainly, the regulator is comes with is garbage. You would expect a dual-tap kegerator to come with a dual regulator (so you can regulate the pressure for each keg) or at the very least a regulator and a splitter (less desirable way to go but can get the job done if the kegs both use the same pressure), but this only comes with a single gauge regulator. And yes, it's just a single gauge regulator so you'll have to guess when you're running out of CO2 unless you add on another gauge. I had someone modify my regulator to add on another regulator and a high pressure gauge and it took him WAY longer than it should have because all the parts were glued together and some of the threadings were backwards from what you'd expect and whatnot. I'd recommend just replacing the whole regulator with a proper dual one if you get this kegerator.Another minor grievance I had was that instructions were obviously very generic and not for my specific model of kegerator. I had to guess which screws went where and how to do certain things simply because the instructions weren't for my specific unit. And it certainly didn't help that the kit has a bunch of extra parts which makes you second guess yourself, or worse, use the wrong part in the wrong place.Finally, this kegerator advertises that you could fit 3 1/6 barrel kegs inside it. Now while this kegerator is large and spacious and has plenty of room for a full keg or a couple 1/6th kegs plus tubing, regulator, CO2 bottle (which is mounted on the inside), etc, there's virtually no way you're fitting 3 1/6 kegs inside it. It's just not happening.However, if you can get past all those faults, you'll find a very nice kegerator with a digital display, quiet operation, dual taps and all the parts you need (sans a decent regulator). Seriously though, get this regulator instead and save yourself the headache:
Chris Suelflow
2025-05-28 13:40:19
I have the kegerator setup and ready to use, now I just have to get the keg! Easy setup, I know it's going to be a hit! I filled my CO2 cylinder at A-OX, who charged me $52 to get it filled. I might have to shop around a little next time it has to be filled.
Suzy's
2025-05-12 13:15:23
I purchased this for my husband for his birthday/Christmas gift and he loves it! It holds two 1/6 kegs and is plenty cold. The assembly was only putting the tubing to the beer kegs, and attaching the spouts and handles. Then he just had to decide what to do with the shelvesthe unit itself arrived in one piece and we just had to make sure it was level on our floor. Attaching the tubing to the beer kegs was not difficult.It was very worth the money because he loved it so much
David H Jacobs
2025-04-07 17:30:36
IT works great, everything is fantastic UNTIL you try to fit a full size (13.3 gallon) german keg in it with an "A" coupler. IT DOES NOT FIT. Why do they advertise that it fits full size kegs when they know it does not. Now I have to find a low profile coupler or pull the keg out and tap it every time I want a beer. Not happy. Update: I bought a 90degree adaptor that fits to the top of the coupler and it fits with a it 1/2 inch to spare. Edgestar's customer service people have been decidedly unhelpful. They've told me that a) the keg doesn't fit and b) sent me the link for an A coupler. A simple note on their website, or compact appliance's website, that the 90 degree attachment solves the problem would have been helpful.
Jon
2025-01-03 18:12:38
mmm beer. I love this thing. I tell my wife so every time I get a beer. (almost) I've purchased a few upgrades for this already. (I got the adjustable flow perlick faucets, and I got a tower cooler. I also got tall tap handles that have a 2"x3" spot for labels that I print out and "glue-stick" to it. It really looks great! To keep a very rough tally of how much has been consumed, I got a couple click type tally counters https://smile.amazon.com/gp/product/B000GAZBPI/ref=cm_cr_ryp_prd_ttl_sol_63 that I click each time I pull a full beer. It's not balls-on accurate, but it at least lets me know when I'm within a few beers of empty so I can order my next sixtel.It has taken me a bit to get everything dialed in to prevent too much foam, but after some online research and experimenting, I'm getting some perfect pours.I have a few issues with the fulfillment of this, but it shouldn't take away from the product review. It arrived with some defects, and the assembly directions with the casters was confusing (no holes for the casters). When dealing with Compact Appliance, they weren't the most helpful. They'd only send a new one after they received this one back first. i.e. I'd be without a kegerator for 2 weeks, with no way to keep my new kegs cold. They refused to send a replacement out first. So, because the defect (dented side housing causing uneven footing) didn't affect operation, I just kept it.
Recommended Products
$49.95
$ 21 .99 $21.99