Your cart is empty.
Your cart is empty.For use with EGO Power+ Rapid Reload+ String Trimmer mode: ST1500SF.Trimmer head holds up to 16’ of 0.095” string line. As an upgrade to our Rapid Reload String Trimmer Head, the Rapid Reload+ Trimmer Head allows you to insert line from any angle, no need to line up the green lines before you insert the line. A nice upgrade to make the #1 pain point in string trimmers easier! For use with EGO Power+ Rapid Reload+ String Trimmer model: ST1500SF.
betty 08
2025-08-18 17:29:33
I just replaced my EGO string trimmer head ST1500ST with......the new EGO model head AH1530. I also watched the You Tube video explaining the procedure from 'Around the Home'. I must say, it wasn't all that difficult to replace. After taking it apart as described, I used a 9/16th socket to remove the long nut on the original trimmer head. I did have to give it some extra elbow grease to remove. I had to use a 1/2" socket to install the new smaller nut that does come with the new trimmer head. Initially when opening the packaging, you can hear it move around in the unit which I thought at first was a broken part inside.Once everything was assembled, it was a joy to push the unit down and hear the click that keeps it in place. Feeding the string through the small holes and turning clockwise is a huge plus now!!Lastly, gave it a brief test drive. Yayyyyyyyyy!!!! Works very nicely. The replacement head, the video, and the whole procedure of replacing was great. I hope that this review may help someone else with their string trimmer mission!! :):):)
CoachHoach
2025-08-16 18:07:39
I ordered this as a replacement head for my ST1500SF (split shaft 15" trimmer) because my original head was causing significant vibration during use. I suspect it was because of hitting the string release against the pavement over time, which ground off enough plastic to throw the head out of balance. This new design has a free-floating disc to hit when extending the line, which hopefully preserves the useful lifespan of the part. The head is not considered a warrantiable part of the tool, so Ego will not offer to cover a replacement (this isn't a knock against Ego, just be aware).This head is definitely compatible with the ST1500SF, and it is a "revised" part to the original AH1500, but there are a couple things to be aware of. My original head had the green marks that you needed to line up when reloading string.My original head was attached with a 9/16" nut that requires a deep-well socket to remove due to the deisgn of the nut. You can get it off with a rachet or an impact wrench, but you have to hold the body of the existing head in place. Once you remove the old head, leave the flat gray flange in-place on the spindle of the motor. I also kept the small metal washer that was on the original head, but the instructions for the new head do not mention this at all.When you affix the new head, it's a 1/2" nut that you can use a regular-depth socket on. It's a bit tricky to get the nut started by hand because of the plastic body of the head being so close, but use some patience and be sure to get a few rotations by hand to avoid any chance of cross-threading. I would not suggest using a power tool off the bat. You can then finish off with either an impact wrench or a ratchet, again while holding the plastic body to tighten it.The new head is slightly harder to split open by pushing the tabs in, but generally you should not have to do this regularly. Otherwise it operates as deisgned and is quite a bit easier to load new string. Hopefully the free-floating disc in the middle keeps this one going longer than the original.
Bill W.
2025-08-12 12:51:44
This makes replacement of string much easier and it was relatively easy to replace the original head (which was junk). Had it been priced more reasonably, (since the OEM was not very good) I would have given it 5 stars.
Customer
2025-08-08 13:47:29
I ordered this to replace the original part on my EGO trimmer. This once was easy to install and fits well to where you couldn't tell it was a replacement. It's held up well and is easy to reload.
Rodney P.
2025-08-01 16:48:03
I can mess up the easiest task. I often read the installation instructions AFTER a failed attempt. But I decided to read and install in that order. Gotta say, installation of this item was a snap and subsequent installation of trimmer line no longer results in me cussing and throwing things. HUGE upgrade!
Tori
2025-06-22 12:54:19
Fit my model perfectly and it sounds so quiet
Roberta
2025-06-17 17:07:44
Loved the great instructions included with pictures, original replacement part for my Ego String Trimmer, took me 10 minutes to install, definitely recommend this, I just use thinner line due to easier loading for me...I am a women!
Wonder Why
2025-06-06 10:17:41
I really wanted to swap out my original trimmer head with something easier to feed the line with; it took sometime to remove the screw from the old one; installing this new head was relatively easy.However I am noticing a lag when I turn it on - takes good 2 - 3 secs before it will start spinning, seems little heavier than the original one and break my line too often, anyone else with similar issues?
Customer
2025-06-05 17:47:17
Easy to replace and works perfectly. Threads the line and rewinds it easily
Customer
2025-06-03 18:52:29
This is a good replacement for the trimmer head housing on older model Ego ST1500SF string trimmer. Fairly simple to install and easy to load the line (manual load but all you do is turn the head by hand until everything is loaded, easy). Would prefer these replacement parts be cheaper, but it is what it is, and couldn't find it cheaper anywhere else in Canada.
Dimi
2025-06-01 14:09:38
Bought a while ago and installed much later but,After only 3 months of use Does not work well in feeding the line automatically. Will not buy againIf I could I would return
Sandra Smith
2025-05-31 14:30:44
Quick Delivery and just what I was expecting.
Francois Jasmin
2025-05-14 17:15:36
Cette pièce remplace la tête originale du taille bordure EGO.Facile à installer et le fil se rembobine très bien.Excellent produit
betty 08
2025-05-04 12:24:36
I just replaced my EGO string trimmer head ST1500ST with......the new EGO model head AH1530. I also watched the You Tube video explaining the procedure from 'Around the Home'. I must say, it wasn't all that difficult to replace. After taking it apart as described, I used a 9/16th socket to remove the long nut on the original trimmer head. I did have to give it some extra elbow grease to remove. I had to use a 1/2" socket to install the new smaller nut that does come with the new trimmer head. Initially when opening the packaging, you can hear it move around in the unit which I thought at first was a broken part inside.Once everything was assembled, it was a joy to push the unit down and hear the click that keeps it in place. Feeding the string through the small holes and turning clockwise is a huge plus now!!Lastly, gave it a brief test drive. Yayyyyyyyyy!!!! Works very nicely. The replacement head, the video, and the whole procedure of replacing was great. I hope that this review may help someone else with their string trimmer mission!! :):):)
CoachHoach
2025-04-28 13:22:09
I ordered this as a replacement head for my ST1500SF (split shaft 15" trimmer) because my original head was causing significant vibration during use. I suspect it was because of hitting the string release against the pavement over time, which ground off enough plastic to throw the head out of balance. This new design has a free-floating disc to hit when extending the line, which hopefully preserves the useful lifespan of the part. The head is not considered a warrantiable part of the tool, so Ego will not offer to cover a replacement (this isn't a knock against Ego, just be aware).This head is definitely compatible with the ST1500SF, and it is a "revised" part to the original AH1500, but there are a couple things to be aware of. My original head had the green marks that you needed to line up when reloading string.My original head was attached with a 9/16" nut that requires a deep-well socket to remove due to the deisgn of the nut. You can get it off with a rachet or an impact wrench, but you have to hold the body of the existing head in place. Once you remove the old head, leave the flat gray flange in-place on the spindle of the motor. I also kept the small metal washer that was on the original head, but the instructions for the new head do not mention this at all.When you affix the new head, it's a 1/2" nut that you can use a regular-depth socket on. It's a bit tricky to get the nut started by hand because of the plastic body of the head being so close, but use some patience and be sure to get a few rotations by hand to avoid any chance of cross-threading. I would not suggest using a power tool off the bat. You can then finish off with either an impact wrench or a ratchet, again while holding the plastic body to tighten it.The new head is slightly harder to split open by pushing the tabs in, but generally you should not have to do this regularly. Otherwise it operates as deisgned and is quite a bit easier to load new string. Hopefully the free-floating disc in the middle keeps this one going longer than the original.
Bill W.
2025-04-22 10:35:31
This makes replacement of string much easier and it was relatively easy to replace the original head (which was junk). Had it been priced more reasonably, (since the OEM was not very good) I would have given it 5 stars.
Customer
2025-04-11 15:53:25
I ordered this to replace the original part on my EGO trimmer. This once was easy to install and fits well to where you couldn't tell it was a replacement. It's held up well and is easy to reload.
Rodney P.
2025-04-01 17:41:34
I can mess up the easiest task. I often read the installation instructions AFTER a failed attempt. But I decided to read and install in that order. Gotta say, installation of this item was a snap and subsequent installation of trimmer line no longer results in me cussing and throwing things. HUGE upgrade!
Tori
2025-03-29 14:50:33
Fit my model perfectly and it sounds so quiet
Roberta
2025-03-08 12:19:48
Loved the great instructions included with pictures, original replacement part for my Ego String Trimmer, took me 10 minutes to install, definitely recommend this, I just use thinner line due to easier loading for me...I am a women!
Wonder Why
2025-03-05 21:45:17
I really wanted to swap out my original trimmer head with something easier to feed the line with; it took sometime to remove the screw from the old one; installing this new head was relatively easy.However I am noticing a lag when I turn it on - takes good 2 - 3 secs before it will start spinning, seems little heavier than the original one and break my line too often, anyone else with similar issues?
Customer
2025-02-20 15:50:05
Easy to replace and works perfectly. Threads the line and rewinds it easily
Customer
2025-01-27 16:10:13
This is a good replacement for the trimmer head housing on older model Ego ST1500SF string trimmer. Fairly simple to install and easy to load the line (manual load but all you do is turn the head by hand until everything is loaded, easy). Would prefer these replacement parts be cheaper, but it is what it is, and couldn't find it cheaper anywhere else in Canada.
Dimi
2025-01-17 18:03:31
Bought a while ago and installed much later but,After only 3 months of use Does not work well in feeding the line automatically. Will not buy againIf I could I would return
Sandra Smith
2024-12-27 11:39:49
Quick Delivery and just what I was expecting.
Francois Jasmin
2024-12-19 18:35:15
Cette pièce remplace la tête originale du taille bordure EGO.Facile à installer et le fil se rembobine très bien.Excellent produit
Recommended Products
