This product is a great solution if you want to keep cords and headphones organized and easy to get to. Holds my wired headphones and guitar cord nicely. Everything seems just as described, the hook seems to be very stable and securely fastened to the bottom of my desk.

Prior to buying The Anchor Pro, I was more interested the original Anchor. I had thought ElevationLab stopped producing them, but at the time of writing this, it looks like they're coming back in stock. This is all to say, I had a few doubts about the pro's extra features, and figured the normal Anchor would be more practical for my use case.I was wrong. At best, the extra features like the keychain hook and cable routing do their job well. At worst, they don't impede on the anchor pro's main use: hanging headphones.I had initially considered clipping or sanding off the keychain hook since I tend to keep my keychain elsewhere, plus it looked like a cheap, last minute addition. Whether or not it was, it's not a cheap piece of wire that'll scratch your hand. It's a robust piece of metal that's smoothed over and curled in such a way that even if you did bump your hand into it, you don't need to worry about getting nicked. The hook being raised on the company's logo also keeps it out of the way when you're fumbling under your desk, trying to hang up a headset.The cable routing that's included pleasantly surprised me. From the photos, it looked like a loose piece of cable tie was haphazardly wrapped around the shaft of The Anchor Pro, but it isn't. It's mounted securely within the shaft and doesn't really move at all, so wrapping it around itself is plenty easy. I know you'll never see it, but knowing that little tie will always perfectly align over itself makes me happy. Additionally, the shaft of The Anchor Pro is hollow on one side. I thought it was just part of the molding, and it may have been at one point during the design process, but it serves as a channel for your wiring to go once it's secured by the aforementioned tie. There's a little half-circle near the keychain hook that's there for your cables to sit in so they go straight down. It's brilliant stuff.Oh, and about the actual part that holds your headphones? It's good. Roomy and the lip that keeps your stuff from falling is generous enough. The 3m adhesive is plenty strong too; the instructions mention letting it cure for 24 hours before setting anything on it, but I feel like it's plenty strong already. If your headset is heavy though, I'd maybe err on the side of caution and let those 24 hours pass. I don't feel like I can yank the anchor pro off my desk at all, but hey, why not listen to the instructions?Lastly, there's some screw mounts, a drill bit, and two cable management clips with adhesive on them. I personally did not need to screw mount The Anchor Pro. The aforementioned cable tie was good enough to keep my headset cable taut along the underside of my desk without the use of the cable clips, although it may be worth mentioning that those don't seem to use 3m adhesive. Speaking of, it's cool that ElevationLab includes a spare 3m pad in case your original one ever wears out.So yeah buy it it's good

Wow! How did I not notice this amazing product sooner?!To start, I own several headphones. I have spent a lot of money on expensive stands to display these headphones. However, as my workspace becomes smaller I find some of these stands taking up a lot of space on the desk counter.I actually found this product through a deals website when it recently went on sale. I had no idea anything like this existed, but when I saw THE ANCHOR PRO, I thought to myself, "What a great idea."I could have saved a few bucks and gotten the standard version. However, I was intrigued by the cord-management feature and I decided to spend a few dollars more to get the Pro. I am very happy I did.To begin with, the anchor feels....well, like an anchor (without the heaviness). It is a very solid product. With the Anchor Pro, you get two installation options, either via the 3M adhesive tape or the included screws. Really, you cannot go wrong with the adhesive tape. I was quite pleased with the strength of the install. I simply removed the protective adhesive covering and firmly pressed the anchor in place beneath my workspace for 30 seconds. It is important to let the Anchor sit for 24 hours to "cure" before hanging your headset.A slight tug at the attached Anchor gives me a sense that this thing is not going anywhere. The adhesive is very strong and does an amazing job of keeping the product in place.I would highly recommend getting the PRO version for the cord management system. It includes two very high-quality cord managers with strong clips and adhesive. You simply unclip each of the clips and thread your charging or headphone cord through it. Since the clips have adhesives on them, they also neatly store away nicely and invisibly beneath your work surface.I use this for my Sony MX1000-m2 wireless headphones. THE ANCHOR PRO keeps them firmly in place. The accompanying cord system keeps my USB charging cord at readiness.This is an amazing product both in its use and overall quality. Go ahead and buy this knowing you are getting a robust product.

This product has been great for hanging my two headphones off my desk. The added cable management has been a welcome addition and I've even had to restick it a few times due to changing desks and the like and yet it's still holding strong. Even with a solid tug, after it's stuck its on there and only needs a few minutes with a hair dryer to come off. Insanely good product, very strong and does it's job perfectly. Highly recommend.

Ware erhalten, in sehr guter Verpackung - Wie gewohnt.Ausgepackt, Folie vom 3M Kleber entfernt und einfach unter den Schreibtisch gedrückt. Hält bombenfest - habe mich zu Testzwecken halb daran gehangen. Gar kein Problem für den Kleber.Nutze ihn für mein Headset. super toll mit ein paar Kabelklemmen (welche den selben Kleber nutzen) in verbindung zu verwenden. Kein Kabel mehr welches auf dem Boden liegt und über das man mit dem Stuhl drüber rollt und das Headset ist auch immer griffbereit.Kleiner Nachtrag: Hält nach 1 1/2 Jahren noch immer bombenfest trotz täglicher Nutzung!

Incredibly high quality product. Very "Made in America". It is large and made of super hard plastic, but that's just the beginning. It comes with all the trimmings that you don't see in cheaper products: 3M's best adhesive AND a bonus pad, screws AND a drill bit for tapping the holes, detailed well-written instructions, a little hook to hang stuff, a channel for running cables, a velcro strip with a channel to keep it flush when not used, cable holders with adhesive backing to direct cables where they need to go... A very handy package with surprise added value AND the product itself works perfectly. Worth every penny!

Not the cheapest on Amazon but then most of the others are a generic rebranded item that don’t come with all the necessary equipment to keep wires and headphones off the desk. The anchor pro hanger was designed with a purpose. Made with a solid textured hard rubber/plastic like polymer material, strong genuine 3M VHB permanent mounting strips, with optional cable clips and a small metal hook to keep longer wires on my wired headphones neatly off the floor. It now holds a full sized wired sennheiser and a wireless gaming headset. Small observation. The tip of the metal hook is not sharp and was nicely finished. Wont nick any cables or hurt your fingers.

I recently renovated my small home office/gaming area and wanted to keep the worktop as clear and tidy as possible. When looking for a headset holder, I was initially looking at various desktop stands and had not even considered something as ingenious as this product! I knew straight away I had to give it a try and here is my impression after 1-2 months of use.What is great:1) The Anchor Pro is strong and easily holds my HyperX Cloud II headset along with my Plantronic headset I occasionally have on my desk if I am working from home.2) The velcro cable management on the unit works well. It allows me to have enough slack to reach from the hook to my head without feeling restrictive and also works well in conjunction with the included plastic clips to keep the rest of the cable out of sight on its way to the device it needs to plug in to.3) Every time I remove the headset from the Anchor Pro and put it back on the hook again, I get the most satisfying feeling (and a grin on my face) as its just so nifty!What could be improved:1) The box contains two small plastic clips to assist with cable management. As you can see from the first two pictures, including a third clip would be ideal as in my case I needed to secure the droop in the cable between the two clips.2) The small white adhesive stickers that come pre-attached to the clips are quite weak and are not up to the same standard as the 3M VHB adhesive pad that is used for the Anchor Pro itself. As a result, after a few days, both clips detached from the underside of my desk. I wiped the area clean with isopropyl alcohol and stuck them on again (leaving them for 24 hours again before putting the cable back in) but once again they came off after a few days.Why I have given 5 stars:In light of the above, I contacted their customer service team who promptly sent me not only a bunch of replacement plastic clips but also a couple of spare 3M VHB pads which I then cut to size with scissors and fitted on to the clips. I once again left these for nearly two days to get the most out of the curing period and this time was able to use 3 clips. As per the third picture, these have now been in place for some time and have not budged an inch so I cannot fault their customer service for shipping these all the way from the US to the UK. Fantastic customer service!Summary:Do not hesitate to buy the product and support these guys. Depending on the length of cable on your headset and how you will be positioning the cable management clips, consider using better adhesive for the clips if possible! The pack comes with a spare 3M VHB for the Anchor Pro so you could cut this into two and use this for the clips if you wanted! (I wanted to keep this as a spare).