Your cart is empty.
Your cart is empty.Product Description
Technical Data
- Tripmeter: 0-999.9miles (Single mileage will not be clear after power off)
- Total mileage: 0-999999miles (Record the mileage after power off)
- Working Voltage: 9~32V DC
How to adjust backlight?
- Power on the power supply first.
- The blue wire touches the negative pole shortly, change the backlight color : Backlight changed in
sequence: red (default) → green → blue → white → yellow → cyan →purple → (automatic).
- Automatic: Automatically switch the backlight color every 1 minute, cycle switch according to the above sequence.
Easy to install.
- Cut an 52mm (2") hole in the panel and allow a clearance of 55mm (2 3/16”) behind the panel to fit the gauge.
- Put the gauge in the hole and screw down.
- For the GPS antenna, you should securely fasten it in the flat position, black side upwards, preferably outside (or inside front windscreen)
so that it has a clear view of the sky to pick up satellite signal. Connect the antenna cable to socket in the back of the gauge. And do not cut cable.
Product Introduction
Why does LCD show Err?
- Turn on supply power after installation.
- Then the meter starts to search for signal and LCD displays "GP".
- If there is still no GPS signal after 3 minutes. the LCD displays "ER".
GPS Speedometer keeps counting?
- After installation in the first time, GPS speedometer needs to search for signal, that's the reason that LCD counts numbers all the time.
- After getting signal, LCD will come back to 0. It is normal.
Package Includes:
1x GPS Speedometer
1x GPS Antenna
1x multi-plug socket
1x Installation Instruction
Joey
2025-08-10 10:14:46
I have another gps speedo and this one works substantially less than the other one. Looks good tho I guess
Jesús Peñaloza
2025-03-04 19:04:49
Trabaja muy bien, con instructivo de instalación preciso
Hank Evers
2025-02-08 17:54:36
Can’t go wrong for the price. The antenna does not have to out in the open. I’ve got mine tucked away, and it still works great.
Recommended Products