Your cart is empty.
Your cart is empty.Product Description
Product Features
Application:
This model is compatible with most standard receiver connectors: Futaba, Hitec, Sanwa, GWS, etc.
Scope: Helicopters KT, fluttering, gliding, small robots, and other models.
Specification:
Operating voltage: 4.8V~6.0V
Operating current: 200mA/60º
Operating speed: 0.12sec/60º at 4.8V; 0.10sec/60º at 6V
Stall torque: 1.5/1.8 kg.cm 20.8/24.9 oz.in (4.8V/6v)
Dead band: 1-2 uSec
Gear Material: Metal
Connector wire length: 25 cm
Connector type: Futaba/JR compatible
Package:
Package Included: 4 x EMAX ES08MA II Metal Gear Analog Servo
Each Servo's Package's Weight: 12g / 0.42oz
Each Servo's Package's Size: 23x11.5x24mm(0.9 x 0.45 x 0.94inch)
Total Package's Size: about 48x11.5x50mm(1.89 x 0.45 x 1.97inch)
Ammon Davis
2025-09-05 12:13:32
I’ve put these in 3 Scx24s and they are a definite upgrade from stock especially when paired with aluminum steering links as for how powerful they are I couldn’t tell you because I run as little weight on my rigs as possible if I don’t need to add brass I don’t but I ordered a portal kit and these servos turn it with no problem I would say it’s with it for a cheap upgrade
Carl
2025-08-29 11:07:58
They are very well made and indeed all gears are metal....No plastic ! The only thing I would encourage anyone to look into is delivery time. Call the seller's phone and check stock. My second order for this product was not delivered in less than a week as was the first one. The second one was actually ordered in Hong Kong and sent to mainland China. They in turn sent the products to Hong Kong who sent it to California who sent it to Chicago and then to Milwaukee.........3 weeks!! Great product for sure !!!! Worked perfectly
Jason Owens
2025-08-08 10:40:16
Bought two one burnt out, might not be the maker but the user, the other two I have have worked for a year so pretty good just be careful about burning them out.
wa1210ck
2025-07-28 12:13:55
I purchased the Axial SCX24 JLU and while it was fun, I found the stock servo to be somewhat lacking in power while on an incline. So, I looked around and came across these as a suggested replacement. Yes and no. The width (AS-1 vs ES08M) is 21.3mm vs 23.6mm (give or take). Off the bat you know you'll need to mod the stock servo tray. Either fidget with it a bit or buy a replacement that will fit the ES08M. You'll be better served if you trimmed the servo screw mounts a bit so it'll fit neater within the chassis. On my SCX24 JLU, it was just BARELY in between and would rub or hang when flexing. The wire comes straight down on these vs the AS-1 where it comes out directly at the sides. The cable is pretty damn long at about 250mm compared to the AS-1 at 58mm. That's pretty damn long for a tiny servo. Did I mention it was taller? So instead of the steering rod links being parallel with the front bumper, it'll stick out about 2mm. Not an issue but in case you're tight for space. So that's the jist for fitment.It's noisy but has some power. Obviously since it is a bit stronger it'll make a little more noise. Now, noise is subjective so keep that in mind but I did notice these were noisier than the AS-1.All in all, these are about the only ones you can buy to replace the stock AS-1 servo if you need something stronger. If you do find a smaller one that's just as strong if not stronger, reply and let us all know.
R Smith
2025-07-25 12:11:33
Received everything as described. Thank you
Mr.1675
2025-04-22 11:49:26
I have put prior ones in one of my planes and they continue to work well. These are the only ones I use in my smaller planes.
Jon W
2025-03-24 11:24:36
The media could not be loaded.
D. Tatum
2025-03-05 13:55:09
a MINI servo should be 27-30g, and 13mm W x 32mm L.these are 12g, and 11.5mm W x 23mm L. not even close, as per motionrc.com/blogs/motion-rc-blog/servo-size
John L.
2025-02-18 14:39:49
I used this in my new rc glider . They are working well
Recommended Products