Your cart is empty.
Your cart is empty.Product Description
How to use?
How to use?
1. Use as a standalone alarm system.
Connect the call point to alarm siren and power source. 9V 12V or 24V DC Power Positive connect to LOOP + of call point, Power Negative connect to LOOP - of call point, Another LOOP + connect to + at siren, Swith terminal with black wire connect to - at siren. Push in and then pull down on the handle activates the normally-open alarm switch. Once latched in the down position , the word" ACTIVATED" appears at the top in bright yellow, with a portion of the handle protruding at the bottom as a visible flag, the siren will sound.
2. Use with conventional panel.
The fire alarm control panel Zone wire can be connected to terminal loop(+), loop(-) unpolarized wire. If the manual call point is in the end of the zone wire, a 5.6K resistance should be connected to terminal loop(+), loop(-)
Technical Parameter:
Dimension: 140mmX105mm
Height: 45 mm
Weight: 220 g
Operating Temperature Range: -10°C to 50°C
Operating Humidity Range: 10% to 93% Relative Humidity, Noncondensing
Latching Alarm: Reset by momentary power interruption
Electrical Ratings
System Voltage (nominal): 24 VDC (9V~ 28VDC)
Standby Current: 60 μA @ 24VDC
Alarm Current: 10~30 mA @ 24VDC
Karen
2025-08-27 15:29:53
i like this product my sister bought me it I'm also goona wire it with the fake alert fire alarm
Estie
2025-08-16 15:22:04
The media could not be loaded.
Norman T Baltazar
2025-07-18 10:48:39
I loved it so much I took it to bed every night then I started to collect more fire alarm pull stations then I got in to a huge hobby of itðŸ˜ðŸ‘
Travis Grant
2025-07-16 11:05:29
My son developed an infatuation with fire alarm systems. We purchased this as a cheaper alternative and it has held up great!
pam m.
2025-07-15 14:27:53
The only thing that could make this better would be if it had an actual buzzer that would go off when activated. My grandson loved it.
Terrell Satterthwaite
2025-06-14 10:52:10
I'm a licensed Electrical Contractor and Fire alarm installer / troubleshooter.I've been in business since 1979I purchased 3 pull stations and they all look good and they all look professional but not one worked. I thought I was getting a great deal because of the price but I ended up going back to my supplier and getting the standard pull stations that I normally used.
Customer
2025-06-07 13:21:56
I’m eight years old and I wanted to get it just for a toy because I really like fire alarms. My mom got it for me. :)
Alexander Aviles
2025-01-28 14:16:45
This item was a working pull station. So I give this a five star
Recommended Products