Your cart is empty.
Your cart is empty.Product Description
Details
Easy to Clean
This printer stand for desk is easy to clean, easily clean up spot with wet cloth
Strong MDF Board
This desktop printer stand is made of high density MDF board, durable for long time use
Multi Storage Layer
This black desk printer stand is special designed with multi storage layer to meets different needs
Kiwiandaussieinus
2025-09-02 14:04:47
Was looking to maximize space on my desk in my home office. My printer is a larger than average Canon and fairly heavy too, this stand looked like it fit my needs and after setting it up I can say it does the job. It is very stable and sturdy with plenty of space for storing various office supplies. Was easy to assemble but it does have a very strong odor of paint which I assume will dissipate with time. The price seems a bit high for what it is but I am satisfied with the quality and functionality of it.
MiamiBob
2025-08-28 15:19:05
Very good printer stand. Very sturdy and easy to assemble. Would highly recommend.
KT
2025-08-25 12:11:18
Was very easy to put together, very sturdy, holding printer on top, papers and supplies underneath. Perfect for what I needed!
Samantha
2025-08-24 14:57:34
This stand is pretty nice but the price doesn't match the quality of the product. I understand that things are stored for long periods of time but for 42 bucks they could at least check the product itself. Mine did show up with some damages but nothing too bad. Maybe if products are being delivered to customers maybe this company should offer them for like 50% or 75% off for damage products. Give customers the option of picking between one without damage for a full price or a cheaper one with damages. I also don't understand why this was 42 bucks anyways, its not like its made from high quality wood.
nkl
2025-08-23 11:34:26
This was very easy to assemble, even though I am 74 years old with arthritic hands and serious range of motion limitations.I am impressed with the quality and appearance of this printer stand - fits my needs perfectly!I highly recommend it!
VFB
2025-08-12 17:08:42
The monitor is never high enough for people with neck issues and a monitor that sits on a normal height desk. To avoid and alleviate a chronic neck issue I had a 'normal' 5" elevated stand. Unfortunately, iII needed it higher and caused me to lower my chair to its lowest level which in turn aggravated my knees.So began my search for an 8" inches tall monitor standard. It was difficult to find at 8" much less one that was a decent size and NOT just a glorified narrow rectangle. This is perfect, it's sturdy and easy to assemble. My chair is now at a normal height and my knees are no longer complaining. I have no complaints and it works well for what I need it to do.
Gerald Polite
2025-08-06 18:41:00
Perfect riser for 3d printer to store tools under it to save space
Lyndsey
2025-07-22 13:01:25
It came quickly, went together easily and fits nicely where intended. My only gripe is almost every side was scratched or marked in some way.
Caro S
2025-07-18 12:35:12
Does the job adequately & bigger than most - I've got a Canon PIXMA on it & not many stands were big enough for it. Great storage space underneath but the wood it's made from seems a bit cheap & flimsy for the price. I previously had another stand for a smaller printer & it was cheaper & much stronger.
Marlene R
2025-07-16 13:48:09
A case of what you see isn't always what you get. This configuration and size fit the space I had for a printer, but the upper middle divider is sloppy (Slot A is too sloppy for Tab B?) and I have a chopstick taking up the gap. Unless I started slopping glue all over the stand, it was the only way that divider would stay.
Kiwiandaussieinus
2025-07-10 10:50:07
Was looking to maximize space on my desk in my home office. My printer is a larger than average Canon and fairly heavy too, this stand looked like it fit my needs and after setting it up I can say it does the job. It is very stable and sturdy with plenty of space for storing various office supplies. Was easy to assemble but it does have a very strong odor of paint which I assume will dissipate with time. The price seems a bit high for what it is but I am satisfied with the quality and functionality of it.
MiamiBob
2025-06-04 10:28:46
Very good printer stand. Very sturdy and easy to assemble. Would highly recommend.
KT
2025-06-01 16:25:01
Was very easy to put together, very sturdy, holding printer on top, papers and supplies underneath. Perfect for what I needed!
Samantha
2025-05-15 10:05:10
This stand is pretty nice but the price doesn't match the quality of the product. I understand that things are stored for long periods of time but for 42 bucks they could at least check the product itself. Mine did show up with some damages but nothing too bad. Maybe if products are being delivered to customers maybe this company should offer them for like 50% or 75% off for damage products. Give customers the option of picking between one without damage for a full price or a cheaper one with damages. I also don't understand why this was 42 bucks anyways, its not like its made from high quality wood.
nkl
2025-05-10 13:59:43
This was very easy to assemble, even though I am 74 years old with arthritic hands and serious range of motion limitations.I am impressed with the quality and appearance of this printer stand - fits my needs perfectly!I highly recommend it!
VFB
2025-03-31 12:14:47
The monitor is never high enough for people with neck issues and a monitor that sits on a normal height desk. To avoid and alleviate a chronic neck issue I had a 'normal' 5" elevated stand. Unfortunately, iII needed it higher and caused me to lower my chair to its lowest level which in turn aggravated my knees.So began my search for an 8" inches tall monitor standard. It was difficult to find at 8" much less one that was a decent size and NOT just a glorified narrow rectangle. This is perfect, it's sturdy and easy to assemble. My chair is now at a normal height and my knees are no longer complaining. I have no complaints and it works well for what I need it to do.
Gerald Polite
2025-03-04 13:30:50
Perfect riser for 3d printer to store tools under it to save space
Lyndsey
2025-02-25 21:41:16
It came quickly, went together easily and fits nicely where intended. My only gripe is almost every side was scratched or marked in some way.
Caro S
2025-02-18 14:08:07
Does the job adequately & bigger than most - I've got a Canon PIXMA on it & not many stands were big enough for it. Great storage space underneath but the wood it's made from seems a bit cheap & flimsy for the price. I previously had another stand for a smaller printer & it was cheaper & much stronger.
Marlene R
2025-02-11 15:45:34
A case of what you see isn't always what you get. This configuration and size fit the space I had for a printer, but the upper middle divider is sloppy (Slot A is too sloppy for Tab B?) and I have a chopstick taking up the gap. Unless I started slopping glue all over the stand, it was the only way that divider would stay.
Recommended Products