Your cart is empty.
Your cart is empty.Michael J McLaughlin
2025-08-30 15:38:02
Part is perfect fit for my 2005 Toyota Camry. I had to lubricate the two retaining bolts with liquid penetrant and let it sit for about an hour as I was replacing an original 18 year old part and didn't want to risk shearing off a rusty bolt. Bolts were really tight but the liquid penetrant did the job. The horizontal fixture was very tight so I had to gently tap the new part into place to align the holes. A few tips: A) park on level ground so the engine doesn't lean; B) Liquid Penetrant for bolts; C) re-use and put the plastic spacers on the vertical connection before you slide it into the fixture; D) hand seat the bolts about 80% of the way so you don't cross thread it, then go back to first bolt and tighten both bolts and then give each bolt a firm final nudge tighter; E) lubricate both bolts with WD40 before and after installing them. It takes about 10 minutes to install after you let the liquid penetrant work it's magic on the bolts.
Diana Porotikov
2025-08-22 11:11:07
It worked great and fit perfectly good for a 2002 Toyota Camry
Kurt P.
2025-08-16 11:54:33
I noticed the engine hopping around a bit when I'd step on the gas, I replaced this part and also ended up replacing the front lower left side mount. It's been a while now and things are still good.
Kyle
2025-07-05 15:34:11
Fit like a charm, great price!
Codie
2025-06-07 18:05:08
This was pretty much a direct fit replacement for my 03 Camry only issue I had was lining the bolt holes up for the shock bracket. The rubber is sort of “moist†if that makes sense to help prevent dry rot which caused my original mount to fail. Overall great product for quick easy repair
Brenda orellana
2025-05-08 12:22:28
Worked with the car that needed it
Carlos Alejandro Tamayo
2025-03-01 14:49:49
Soporte de motor cumple con sus especificaciones facil de montar
JAVIER LAGUNA
2025-01-11 18:10:58
Excelente
Recommended Products