Your cart is empty.
Your cart is empty.Securely mounts weapon vertically or horizontally in any vehicle. Works with or without sight. One clamp secures the stock while the other holds either the forfend or barrel.
susie
September 3, 2025
I’m not really using this as most would expect, was looking for a flexible clamp type thing to store my four step folded step stool against the wall under the handrail going upstairs for easy access for me to get at easy and this does the trick! I use it like a big rubber zip tie onto the stool and and railing so doesn’t fall over onto anyone. And I can easily get out to use. I’m 70 now so need easy access to everything but don’t want to keep something like that out in the open. Perfect! Very well made and sturdy. I actually wanted to mount it to the wall but there are no studs at the bottom of the stairs and don’t want to use anchors. So it works for me anyway but I do like that it can be anchored if I want to down the road. Good price.
Sgrasseth
August 26, 2025
I bought two of these for securing my 10lb CO2 tank in the bed of my 2012 Toyota Tundra. Before installing in the truck, I pre-stretched the straps around the tank on my bench. This made it much easier when it came time to get it around the tank when installed.I installed the straps using (3) #10 1-1/2 self-tapping sheet metal screws per strap; the two outside holes with 3/16" fender washers under them and a standard washer under the middle screw. This added an incredibly safe, secure and reliable mount for my tank. Without the use of fender washers or some large-head screw, these would've been a pretty unpredictable mount and would not have held while trying to strap around the tank. Great product.
Jeff
August 5, 2025
Easy to use and works well for my project.
Trevor L.
July 24, 2025
I bought this to mount my sawzall to a molle panel in my truck. It holds my tool just fine, however a pain to mount it. I ended up spending some time modeling and 3D printing a custom bracket just so it would retain its form and strength when mounted. That may have worked just fine with a bolt through the built-in holes, but when tightening it down, it felt like the bolt was going to tear through the rubber overtime, and I just didn’t trust it.
Customer
July 16, 2025
I bought this after having to return another set of co2 mounts for my kegerator because they were too thick. This one is super easy to install with a few screws and even easier to lock the co2 tank in place. If you are considering this for that purpose I'd definitely recommend it.
Nick Johnson
July 5, 2025
I ordered two of these to stabilize a 9.25" cylinder (5.1 gallon beer keg) and although it is stated on the package that they will handle up to 9.5" diameter as you can see from the photo against 8.5" stationery they are almost 2 inches short of that diameter unstretched. They could probably handle a 7.5" diameter without much stretching. This means they are over 6" too short. (2" X 3.14) unless stretched. Otherwise I give them high marks and they should work well if you have something less than 7.5" diameter but I hope this saves someone else the trouble if you really need to handle 9.5" and your application is un-mounted.Update: I contacted the company and here is what they said:"We have sold this clamp for many years without modification. Most of the time if someone is having difficulty reaching the upper range of a particular clamp it’s because it’s not mounted. I urge you to mount this clamp and try it yourself with a cylinder that would land in that 9-9.5†range."I did NOT mount the clamp nor did I intend to for my application but I "suppose" mounting it might allow stretching it the 6.28" required to reach a 9.5" diameter. I changed my rating because of great communication/support with the company but I still hope this review helps avoid a return if you plan to use it unmounted. My objective was to let others who plan to use the clamp as I did (unmounted to stabilize 5.1 gallon beer keys) know it won't work for that. As I said initially I give the clamp high marks otherwise so if you are going to mount it please post and let everyone know it can be stretched to the claimed 9.5" diameter.Update: I changed my initial rating to 5 star because of GREAT communication with the company. They informed me that the clamp only works for a 9.5" diameter IF mounted. While I have no idea how hard it might be to stretch the clamp when mounted (my application was unmounted plus I've already sent it back anyway) the company sent me a photo of the clamp around an 8" scuba tank with several teeth left so it seems likely 9.5" is possible. But again, don't plan on using this clamp un-mounted as I did if your application doesn't allow mounting it.
Tnt
June 14, 2025
Use this to hold fast a life ring on my boat and works excellent.... seems sturdy and built tough
B.M.
June 1, 2025
I love Quick Fists and use them a lot but I had to return these as the description says up to a 9 1/2†diameter and they would not even make it close to fastening on an 8†cylinder I needed to secure. They would probably work up to about a 7†cylinder and that’s about it, they really need to change the description.
djdlanda
May 9, 2025
lo compre por que se supone son de alta resistencia y se rompio sumamente facil, yo no los recomiendo
Halcon
April 7, 2025
Used this to clamp a loose connection for my RV's waste tank hose. It works like a charm. It is sturdy and remains in place.
Ets
March 8, 2025
Hold it together strongly good quality
Amber Stayer
March 3, 2025
Product is exactly as shown.
dave
February 13, 2025
These are great, used them before
Recommended Products
$29.99
$ 15 .99 $15.99
$37.99
$ 19 .99 $19.99