Your cart is empty.
Your cart is empty.Product Description
ENRH3203 Rotary Hammer
ENRH3203 heavy-duty hammer is your wise choice. It can reach 880 r/min no-load speed and 4350bpm max impact frequency applies to various working like dismounting walls, breaking floors, decorating houses, etc.
Double Function Switch Design
ENRH3203 rotary hammer offers three different functions: drill only, hammer only, and hammer drill. You can easily switch between functions using our two different function switches. The double function switch design extends the service life by 100% compared to single function switches.
Comprehensive Tool Kit
ENRH3203 Rotary Hammer Comes with: Sds-plus drill bits（8mm,10mm,12mm）*3; Sds-plus 10-inch chisels*2; Auxiliary handle*1； Replaceable carbon brush 1 set; 329Grease*1； Dust proof cap*1； Carrying Case*1; Stop worrying about getting accessories and get an all-you-need kit here at ENEACRO.
-
SDS-PLUS Keyless Chuck
Patented SDS-Plus keyless chuck is designed to improve your work efficiency. You never need any tool to change bits in-between jobs. Accurate control provides the maximum impact energy transfer.
-
Upgraded Vibration Buffer
Vibration Damping Technology(VDT) effectively reduced injury during working. And soft-grip handle designed for less fatigue and more precise control.
-
360° Adjustable Handle
360° Adjustable handle is designed to reduce the fatigue of our users during longtime working. Provides accurate and convenient strike in some relatively narrow places.
-
Grease & Carbon Brushes
It is necessary to change the carbon brush and grease regularly. When only a third is left, grease must be replenished. And carbon brushes need to be replaced when the hammer drill has no power.
Mark Warbington
2025-08-30 17:39:29
While working as the property manager for our neighborhood HOA, it fell on me to repair the security fence around our swimming pool. Several of the chainlink fence posts had rotted out flush with the concrete. Post anchors were the perfect solution, but each required four holes to be drilled into the concrete. A local pawn shop wanted $400 for a beat-up and filthy Hilti hammer drill, but I bought this Eneacro new for a fraction of the price. It did the job well and we wrote it off as part of the repair cost since I never expected to need it again.Three years later and I needed to replace the posts under my deck. There were eight posts and each post base required four holes drilled into the existing concrete piers for anchors. I dug out the Eneacro and it worked flawlessly, with each hole taking 20-30 seconds.The packaging and extras are also very thoughtful. Molded case, comes with some SDS Plus drill bits and chisels to get you started, an extra set of armature brushes, grease for the hammer mechanism, and a tool to remove the grease cap (similar to an angle grinder wrench). I've only used mine twice in three years but it seems to be a quite well-made and powerful tool. I can't speak to the longevity, especially in professional applications where it will be used daily, but the extra set of brushes suggests that the manufacturer expects it to last for quite a long time. Very impressive for the money.
Roy R
2025-08-26 16:47:10
I’m a homeowner and a big do it yourselfer.I have laid tile and repaired tile. I recently had several tiles that needed to be removed and replaced. I’ve done it by hand, which is hard and very time consuming. So, I purchased this hammer drill to make the job easier and faster. I have used it twice, and it worked flawlessly. Plenty of power and easy to switch out scraping blades. If you haven’t used one before, it does take some getting used to.
M
2025-08-20 14:54:58
At 11lbs- its not light, but it feels ergonomic in your grip. Good functionality for price point.Pros: price, weight (approx 11 lbs or 5.kg), grease pot on top, 2 sds bits included, grease preinstalled with grease refill included, tool case included, easy action with toggles to swap to hammer mode/drill only, thick plastic, manual includes 2 bushing replacements (under motor), 1 yr warranty, and gun started upon plugin w/o issues or smell. Steel bit holder good quality. Ergonomics on point with motor low and large 2 finger button w/o safety. (Safety is unplugging when not using).Cons: front handle is in down position and needs to be unscrewed to adjust (with screwdriver), manual w/o impact specification of foot pounds, poorly worded english but readable, included case with plastic close-clips that look to be the weakness (metal clips on case would be better longevity of case), and finally gun handle had some twist upon unboxing— had to tighten all screws and also allen wrench the motor nut as they were all slightly loose. Flex did stop after tightening (and manual does state to periodically check/tighten screws). No reverse gear.(only $$$ have this fx anyways). No rotation stop upon button release. (Ie- motor slows a couple rotations before stopping- again $$).Not a con- but gun states no torque conversion; so it shouldnt be used as a mixer or circular cutout. I knew this going in- just fyi.Seems well made VS competition, weight good and heavy means not cheaping on parts; at this price point of $109; its a great buy. Seems rugged, case N gun use thick plastics, and 2 bits at 10-15$ a piece is a nice selling point. Hope to get years out of this as I’ll be using it as a chipper, floor tile remover, and cement drill to place rebar in existing forms. I am not a professional.4.5/5 stars!!
Martin
2025-08-10 15:41:45
Heavy duty and versatile. Makes a hard task seem easy
Curt - Sacramento
2025-07-25 13:39:31
What a tool this is!!! I had to cut out a 12†x 18†area of concrete and I did it! It took getting both the chisel and spike stuck in the concrete at the same time twice to figure out that I needed to chip away smaller pieces at a time. Once i figured that out it went very fast.The tool can be used as a drill, a jack hammer or a combination of both. The drill alone was very slow going but once I set it to drill and hammer, it would drill through the 3†concrete in 10 seconds. I drilled holes around the outline of area to be removed, drilled 3 holes in the middle and started to hammer away, bit by bit until the job was done.I had a company quote me over $3,000 to do the job and I did it with this $110 tool AND I still have the tool!I’m 79 years old and was worried it might be too much to handle but it was very workable.I highly recommend this tool if you’re doing a home project!
Turfsurfer
2025-07-17 14:43:43
The media could not be loaded.
Scott Thomas
2025-07-15 16:43:09
The media could not be loaded.
Pierre
2025-05-07 16:18:49
This is a well built, heavy tool that went through a concrete foundation with ease. I would buy it again but I have a feeling this one is going to last a long time.
dan bauer
2025-04-23 18:36:14
very impressed with the quality and power of this unit. exceded my expectations. it has so many good reviews so we tried it, works great, happy with it.
Oscar
2025-04-05 14:12:14
Este es un producto con buena relación calidad precio yo lo he ocupado en perforar y sin hacer fuerza realizó el trabajo, los plásticos son buenos.Lo único que no me gustó es que el sistema de amortiguador es muy rÃgido y se ciente el golpe de martillo en la mano.Fuera de ahà buen producto
Josh L
2025-03-05 21:20:42
Performs and feels like a bosch or other name brand. Nice case, and easily serviceable. A little agressive with a small bit, but will punch a 1" hole easily.
Victor Andres Que Mendez
2025-02-03 11:33:43
Es un producto potente y robusto. De una calidad execelente. Incluye maletÃn, tres brocas, dos cinceles, un guarda polvo, unos carbones de repuesto, lubricante para el conector sds, póliza e instrucciones en ingles. Cuenta con una llave tipo para esmeril, con esa se destapa un compartimiento que trae la herramienta donde puedes guardar el lubricante. Anexé una foto con una coca cola de 2.5 l a un lado para que tengan una idea del tamaño. Me encantó.
Staphel
2025-01-07 15:58:48
Light weight and ease to use build quality is good speed great and the durability is ok, great tool to have
Recommended Products
$129.99
$ 56 .99 $56.99