Your cart is empty.
Your cart is empty.Energy Suspension is the world's leader in developing and manufacturing performance POLYURETHANE automotive suspension bushings. In order to assure perfect fitment, Energy Suspension manufactures their bushings to exact specifications - assuring an exact fitment to your existing suspension components. These bushings are engineered to exact the maximum in handling performance out your vehicle.
Scott M.
September 2, 2025
Excellent quality bushings. Easy enough to install on the track arm (pan hard bar). I ended up using a small shop press to remove OEM bushings - these can be a pain, so be prepared ahead of time with a strategy to remove them. Once out, these go in nice and tight.Getting the track arm back on was a nightmare - hope you have better luck! Again, be prepared. What ended up working for me was installing the frame side of the track arm first, and then using a combination of a jack and a small pry bar through the bolt hole to get the track arm - axle bolt to line up. Have patience, and be prepared for a battle. Of course, none of this has anything to do with the bushings themselves. They fit exactly as expected.
happyashell
August 23, 2025
fits , took the slop out
Avon
July 8, 2025
part was easy to instill took about 45min press the old bushing out with a socket and instill the new bushing.
Ashley B.
February 1, 2025
easy install.
Your neighbor
December 23, 2024
The fit was too big, so I had to force it on the bar, and some of the poly shaved off and its looks squished in a way that I think it won't last very long. On the other hand, I was able to get it to work and the vehicle doesn't flop around anymore and is much much safer. It's been about 4 months and its working so I'm happy especially because if I had to buy the entire part it would have been a lot more money and this cheap replacement is so far doing the job. It was a pain to install though, buying a replacement bar with the bushing already installed would have saved me a lot of time.The reason was because the fit was poor so I had to spend more time just getting the bushing into the bar correctly, then it was so deformed it took some ingenuity to get it between the bracket on the vehicle. But it's tight, very tight, I'm not sure how well it moves so like I said, we'll see how long it lasts and I'll report back later.
Jason Moreland
November 20, 2024
Junk only 8months old and need replaced already very unhappy
Recommended Products
$15.26
$ 5 .99 $5.99