Your cart is empty.
Your cart is empty.ENERGY SUSPN Energy Suspension 9.5173R 1-3/8" Sway Bar Bushing Set
Amazing Customer
2025-08-22 17:32:39
It fits, with slight mod. My 2014 Ram 1500 4x4 has a 36mm front sway bar. These just barely fit with 1/2mm gap in the bushing. I did have to drill the bracket to reuse the OEM bolts. This does not come with any. DISCLAIMER: this says it does not fit my truck, however, I wanted the greaseable fittings and took a chance. I would recommend it, knowing slight modification is required.
Ryhan L.
2025-08-09 21:45:29
These worked great on my van. It appeared the options on rockauto and such were the wrong diameter. 1-3/8 and 35mm are virtually identical sizes so I went with these and that took care of my old wore out sway bar bushings.
Joseph B
2025-07-23 10:27:05
If you don't know already, Energy is probably the top dog in the polyurethane/rubber suspension game. These bushing make my truck turn and ride so much smoother it feels better than new. If you have an LLY or an LBZ these are the perfect set (not sure if the sway bar is the same size for the lb7). In addition to being a great high quality bushing, these are the only greaseable bushings made for my truck, keep in mind though they shouldn't need much grease through their lifetime.If you choose to use the brackets that this kit comes with you will need to shave down one side for the passenger side clamp a little bit so it can clear the frame if your using it on a Chevy/GM 2500HD. When putting these on there will be a tiny gap, but after you tighten them down the gap closes completely so don't freak out.
R. D. Mathews
2025-06-23 15:18:11
Correct fit for 2000 Ford Excursion. Hard to find OEM parts for this vehicle since Ford used whatever was laying around to assemble each Excursion one by one. So even your manual can't help you.
shay
2025-06-09 15:09:45
2012 Mustang V6 worked great. I used prothane Inserts before these and had constant issues. These work great
Marty
2025-05-20 16:14:29
Easy install, fit perfectly
Brandi Inman
2025-03-20 10:11:25
Front end had bad side to side movement. Replaced with these and it was like night and day difference. Would and will buy these again. The grease fittings are a plus now I can grease these and get more life out of them. OEM did not have the fittings these are so much better than OEM.
mr poop
2025-01-27 13:15:03
Very high quality product. Made in USA. Got this for Chevy Blazer with 35mm Sway bar.Easy install. Did not have to take Sway links off. Jacked up front end and swapped out bushings with no issues.
Recommended Products
