Your cart is empty.
Your cart is empty.Equus 2" Boost Gauge measures the boost from 0 - 60 PSI of the engine. Also features a bright backlit display for enhanced night viewing in one of four colors and 270° sweep for increased visibility. Rear twist-on ring mount and included hardware and adapters make for an easy, basic installation in most foreign and domestic vehicles.
Roberto
2025-08-20 17:53:59
1 year no issues. Do not pay more for other brands, this works totally fine. Running 45 PSI.
Steven H.
2025-07-27 13:04:50
Nice quality boost gauge, bad thing it took a month to get it for some reason.
Customer
2025-06-27 16:34:33
A++++++
Jttoka
2025-04-07 17:41:34
The media could not be loaded.
Denny
2025-03-26 13:39:47
Good product, however only 5 feet of vacuum tube, not enough to reach center of engine from top of steering column. Had to order a longer tube.
marty walters
2025-02-14 12:36:05
I always have used the boost gauge I've spent from 10 dollars to 200 dollars specifically on boost gauges, yes this one is maybe . 05 pounds under given I've got a tiny vac leak it wouldn't hurt to put some tape on the tube and the back of the gauge I've always had the hoses push out or trip me out thinking a bull snake climbed in my truck. Like I mentioned use electrical tape at the very end of the job on all the connections you made. For those that are stuck on installing the gauge look for a rubber cap on the back of the throttle body on ford v8,'s if non their look at you oil cap look for the hose behind it follow it up to the intake and t in their. The light you just need to make sure you have LEDs if not then use a led bulb, pull you light control switch and find the vehicles wires for the lighting controller so any time the dash lights come on it lights up on 12th gen f150 it's the purple with grey strip for power and if you want to ground in their also then use the closest black wire to the positive you connected please loop around and twist the wire you added not the vehicle then match the way the car wire runs tape those together same with ground vhalla done. But if your not running a turbo run a vac gauge it's easier to read those usually I go with a separate boost and vac gauge. Those run the same way.
Chip J.
2024-12-31 09:36:44
I have seen a few gauges in my time from good to bad, this gauge might work ok but it is very light and the threaded locker cannot be tightened without it stripping. I haven't seen a worse one, I'll put it that way. I'd say it's a $20 gauge tops. I am ordering a Murphy or Stuart Warner now, one I know is decent. Don't know what I was thinking.
Customer
2024-12-21 13:35:27
The product I purchase isn't working and defective. Contacted the seller and no response to change out.
Recommended Products