Your cart is empty.
Your cart is empty.Product Description
Enjoy a More Immersive Workspace
Experience the ultimate in workspace functionality with this dual monitor stand for 2 monitors. Upgrade your workstation today with this monitor mount to enjoy a more comfortable, productive, and visually appealing desk that offers a variety of screen customization.
Multi-Screen and Multi-Task Working
The Desk Dual Monitor Stand allows you to customize the way your computer monitor hangs, allowing you to multi-task and maximize performance.
Please note: Two screens cannot be stacked up or down.
The dual monitor arm is designed with cable management clips on the arm and along the pillar to route wires for a cleaner, more streamlined look. Enjoy a cleaner desktop without messy cables and wires getting in the way.
Monitor Adaptation Conditions
Your screen needs to fulfill all three conditions at the same time:
- Size - between 17-32 inches
- Weight - between 4.4 and 19.8 lbs
- Backside - needs to have visible vesa holes
Desk Adaptation Conditions
Your desk needs to meet all three of these criteria:
- Size - We only recommend wood or iron table tops.
- Style - try not to have blocking and beams on the bottom of the table on the mounting side
- Thickness - 'C' clamp fits 0.39"-2.56" while grommet mount fits 0.39"-2.17".
Z. Jackson
2025-08-14 10:21:53
I’m using this with 2 27†m27ua displays from gigabyte and it works perfectly the only draw back is that you can’t have your desk all the way against the wall since the arms will hit the wall before the desk is all the way back. Requires about 7†of clearance. I might mount through the desk to push the arms forward so the desk can touch the wall.Cable management and mounting with the clamp was very easy. Not sure what the other reviewers are complaining about
Alex Gutierrez
2025-07-19 13:51:37
Easy to install, easy to adjust and great quality. I can move them around very easily and for the price this thing is awesome. I have so much more space on my desk now that I'm not using big ol stands. I haven't had a single issue with this product.
Oz
2025-06-14 17:23:59
Easy to assemble. Installed this in an atypical way and would have really liked for the arms to be capable of lowering a few more inches. It would also be nice if the mounting brackets had a longer horizontal range of motion, found it hard to get a pair of curved 32" monitors to line up well because of this. It does seem sturdy, easily supporting about 38lbs worth of monitors right now. Despite what the instructions say, you can mount this to the front of a desk. (This assumes your desk is strong/thick enough, that it is anchored or won't tip over, AND you're willing to drill a hole. Don't try to use the clamp method or it will end very badly...)
Ryan
2025-06-10 17:14:56
Holds up both my monitors perfectly and the clamp fits perfectly on my desk with 0 damage or issues. It locks with no issues and at all would 100% want to get this as a gift for a friend in the future.
Josiah
2025-05-20 17:19:28
Becareful with the arms I busted my lip lolSuper nice those and old's the weight of my heavy monitor
Dalton Walsh
2025-05-09 12:59:45
Adequate weight baring. Cable management is decent but not great but as long as you’re careful you’ll be fine.Very easy to install. All the tools were made available.Extremely mobile and easy to maneuver.
Brian
2025-04-18 14:23:48
The product succeeds at its primary task, it holds up monitors and they do not fall over, or catch on fire. Mission accomplished.The arms are, however, very poorly designed. The cable shroud on the top half is a clip in that is extremely narrow, and may have issues with cables that are thicker. Strangely, the cable shroud on the bottom is actually the full width of the arm, so the sudden switch up of shroud width is very odd. Additionally, the bottom shroud does not use a clipping mechanism like the top shroud, instead it has two screw holes and is screwed in to the arm. This would just stop at being inconvenient, on the counts of requiring you to unscrew/rescrew the shroud in, if it weren't for the fact that the tunnels through the shrouds severely limit your space to actually put cables through it, AND ARE INACCESSIBLE BECAUSE YOU CAN'T FIT A SCREWDRIVER BETWEEN THE ARM AND YOUR DESK.Mounting brackets for the monitors come with two screw types, a short and long, and spacers. Pretty much every monitor's screw holes will be the length of the shorter screws; the longer screws in a VESA mount kit are always intended to be used in combination with spacers, in the event that a monitor's VESA mount points are sunken in to the monitor chassis; this then allows space between the mounting bracket and the actual monitor chassis so the monitor and bracket can be slipped out without actually removing the bracket. But the spacers for the longer screws are not actually long enough! So for monitors where the VESA mount points are sunk into the chassis slightly, you will need to use the shorter screws anyways, which in turn means you won't be able to attach the bracket then slip it on to the arm, you will need to first connect the upper arm to the bracket, then attach that entire assembly to the monitor. Then you can finally put that entire assembly in to the lower arm, trying your best not to break your now awkward to hold and heavy combo of monitor and arm.2/10, irrefutably designed by the drunken hallucinations of generative AI, because apparently all basic human capacity to think and design things which already exist is completely dead. Can successfully hold monitors, just be extremely careful while assembling and don't expect it to do literally any other convenience offered by other VESA mounts.
Topwatch
2025-03-08 12:40:01
I have an ErGear single monitor stand and wanted to go to a dual arm. The single is a good quality arm and works as expected. This double failed to hold either of my monitors, neither of which weigh more than the 22lbs indicated by ErGear.This particular arm didn't impress me in build quality (cheap and light weight) and the VESA mounting joint simply could not hold the tilt of my smaller monitor and would not hold the position of the larger monitor (the one originally mounted to the ErGear single arm). Part of the problem is the VESA/tilt mount has a single bolt which creates a friction point to hold the tilt. I could never tighten it enough to keep the monitor from going face down. That monitor is 12.5lbs. ErGear makes some good monitor arms, this one simply would not work for my application. Returned to Amazon.Update: Received an email from ErGear via Amazon. They were very cordial and apologetic for the situation, which I appreciate. As indicated previously I also have a more expensive single ErGear arm which is 5 star. This review is only applicable to this particular very inexpensive arm and not ALL ErGear products.
Clifton Corcoran
2025-01-30 17:46:21
Used this to mound 2 27†monitors hooked up to a Lenovo Yoga laptop. Easy to set up , worked great. Great product at a great price.
Helis joel
2025-01-24 15:22:05
Bon produit, facile à installer.
irow
2025-01-02 15:55:16
إذا اركب شاشة على الستاند تنزل لتØت كي٠اشدها ØŸ
Aarón MartÃn
2024-11-26 20:15:50
El soporte es muy robusto, fácil de montar y cumple con el objetivo que es sujetar dos monitores liberando espacio en el escritorio y sin vibraciones ni partes sueltas. Perfecto para el uso.
Karolinka
2024-11-23 15:14:16
Ich habe bis dato verschiedene monitorhalterubgen ausprobiert und schon viel Geld für solche bezahlt - ich hätte von vornherein eine Halterung mit gasdruck System nehmen sollen, die macht das ausrichten der Monitore - in meinem Fall 2 - Super einfach und entspannt. Alles funktioniert super und vor allem einfach ohne lästiges Schrauben oder Minuten langes austarieren.Kabelmanagement ist hier auch kein Thema da es pro Arm zwei Führungen für eure Kabel gibt.Ich würde 6 Sterne geben wenn es geht weil hier alles passt: Verarbeitung, Preis und Look.Es gibt die selbe Halterung auch für nen dreistelligen Betrag - nicht nötig auszugeben weil diese ihren Job hervorragend macht.5 Sterne hierfür
Recommended Products