Your cart is empty.
Your cart is empty. Take accurate non-contact temperature readings of any surface within less than a second.
Warning: Once you own this powerful and fun tool you won't be able to put it down
The eT650D from ennoLogic is a noncontact precision infrared thermometer that allows you to measure the temperature of an object from a distance by sensing its radiated infrared energy. It is a feature-packed instrument with countless home and industrial uses that include cooking (pizza, grilling, candy and chocolate making, tea, beer and wine home brewing), food safety, refrigeration, forging and metalworking, soap making, automotive, A/C, HVAC, pool, and even animals (reptiles, chickens). Not designed for body temperature measurement or medical use.
-Scanning feature with Min, Max, and Average display
-Two built-in laser pointers to precisely identify the target spot you're pointing at
-Large easy-to-read display with bright backlight
-Toggle between °F and °C, and turn backlight and laser on and off individually, all settings retained between uses
-Distance to Spot Ratio 10:1
-Fast power-up and response time of 500msec
-Adjustable emissivity provides increased accuracy for different materials
-Adjustable High/Low set points with audible alarm
-Ergonomic, attractive, rugged design
-Package includes one eT650D, Holster, 9V battery, user manual, and NIST certificate
The ennoLogic eT650D comes with a 10-Year Warranty.
Compliant with FDA and FCC regulations.
NIST-traceable calibration verification certificate included.
Doc Savage
2025-08-31 17:47:06
I decided on this temperature gun as it had a higher maximum temperature capability than most of the competition. There is even a higher max temp rated model available if needed. I was really looking for something with min max and avg capability and this does a great job with that. You can scan for a while then get he min max and avg for the entire scan period. It also can set an alarm for any low and high temp you want and then beep when the low or high is exceeded during scanning. There is nice backlighting which can be enabled or disabled . Warning this same capability can also disable the laser (not sure why i would) but you can. The box it came in was utterly high quality and kind of hard to open but certainly nice. The carrying case is decent and i might use it because it basically the exact size of he gun and no bigger. The gun feels nice and while not of the highest quality ... it’s not super cheap either imho. I’ll be careful with it. I did find the battery was difficult to put in without making the cover hard to close. Because I read this on another review I tried a number of configurations and got it to close pretty easily on the 6th try. Then i discovered the instructions included a one page thing saying to go Online and they would show a video on how to do this. If i has only read the instructions first! The instructions were pretty good and in lots of languages unfortunately. Because of the 10:1 ratio and the two lasers you have to be about 8†away for optional spacing of the two lasers. You can read further away but then the lasers are also pretty far away. I can aim at my TV and it got one laser on the top and the bottom of the screen. So it’s best to be fairly close to what you are measuring. All in all this seems like a great product. I bought it to measure my catalytic converters before and after to see if the cat is good or bad. (Generally temp is high and gets even higher after the cat if it’s working. On a broken cat the temp goes down. So could save you hundreds if you have just been toldYou need a new cat $1000-2000 . It might just be your sensors or something else.
Karl R. Lamberg
2025-07-26 10:50:05
I love this thermometer. If you want a certified thermometer, be sure to select the NIST calibrated one. It comes with a certificate that is good for a year. Don't complain that you did not get a certificate because you need to select that. It is a bit more expensive, however, if you want a serious big boy thermometer it is worth it. I'm saying that because I bought a toy one here and returned it. This is the real deal and worth every penny. I use it for everything from cooking, refrigeration, HVAC, computer cooling systems, and whatever you can think of that requires a thermometer. Also, don't complain about the lasers being misaligned. They are supposed to converge at a set distance and that's where you need to be to get the most accurate reading.If you need a solid, reliably accurate infrared thermometer this one is the one to get.
Al
2025-07-07 13:30:20
This product has a lot of great features. It reads temps well but as noted you have to be about 8" from the item which at times is difficult in my environment. I like it that it is compact, LCD is easy to read. Still figuring out how to read temps on stainless but that will work out.Two items I don't like. 1) is the 9 volt battery. I have found after you change a few of these that the connector becomes susceptible to breaking. 2) the cover for the battery (on the trigger side of the handle) will not stay closed. Not sure how to fix that one.Over all a good buy for the price, good capabilities without breaking the bank.
Bwieder
2025-05-23 15:02:29
This device, although similar to other cheaper IR thermometers, is far better. Quality control is a priority. According to ennologic.com, each unit is checked thoroughly for accuracy, before it is sold.They back that up each device with a 10 year warranty.The eT650D has features not found in most of the cheaper units and not even some of the more expensive ones. For example, you can log upto 20 measurements in memory, something more expensive IR thermometers won't do. You have the option to continually scan without having to keep pressing the trigger, again something the more expensive IR guns won't do. Dual lasers, again a more high end feature, useful for localizing the precise area to be temperature scanned, can be turned off. The display is bright when you want it, or you can turn it off. You have the ability to modify the emmisivity setting to improve the accuracy of your readings, just like with the more expensive F brand devices.You expect and have modes that give you Max, Min,Avg, and Difference between 2 readings. Having audible alarms that can be set for your chosen high or low temperatures is another nice feature.Moreover, the unit operates in a wider temperature than most: -50C to 650C (-58F to 1202F)I tested the accuracy of my device with both boiling water and a slurry of ice and water. The measurements were spot on.My only complaint with the device is the tight battery compartment, which makes fitting in the 9 volt battery into it a bit tricky. The wires must be looped and tucked in carefully along side the battery above the battery clips in order for the handle door to latch correctly. When I had trouble doing this, Customer Support came to my rescue by emailing me a picture showing me exactly how to do it. With a 22 hour battery life, I shouldn't have to be doing this often, although if I keep playing with this new device, I may be changing that battery pretty soon..
Richard Chocolat Factory s.l
2025-05-22 17:02:33
me ha gustado la precision
Tiziano Bergonzi
2025-05-10 12:56:11
molto comodo da usare
Fredo
2025-04-08 15:05:33
Ce thermomètre me permet de contrôler avec précision la température de mon four à pain et ainsi de trouver le meilleur point pour réussir la cuisson. Simple d'utilisation, ce produit de bonne facture satisfait pleinement l'utilisation que je lui réserve. Je recommande ce produit d'un rapport qualité/prix très avantageux.
Badjester1
2025-01-30 18:58:40
Great product for aquarium owners! I was fed up with using various thermometers to check the temperature of my fish tanks, they're never completely accurate . This is so simple! I can test the temperature in a split second and have now managed to get all my tanks the same temperature with some tweaking. I don't use the laser for testing the water as I don't really fancy blinding the fish.
Ludwig Enfield
2025-01-07 13:58:31
Ich habe dieses Infrarot-Thermometer gekauft, um die Oberflächentemperatur verschiedener Teile an Motorrädern zu messen. Wichtigster Aspekt zur Wahl genau diesen Geräts war der einstellbare Emissionsgrad. Die Wärmeabstrahlung einer Oberfläche hängt ja ganz entscheidend von Material und Art der Oberfläche ab. Graugus, Aluguss, geschwärztes Blech, lackiertes Blech, Chrom, Gummi haben teils sehr unterschiedliche Emissionsgrade. Wird dies nicht berücksichtigt, sind manche Messungen um Hausnummern neben der Wirklichkeit. Viele billige Instrumente haben einen fest eingestellten Emissionsgrad (meist 95%). Der passt bei einem schwarzen Auspufftopf, bei Gussteilen wird aber zu wenig angezeigt.Ein Punkt Abzug für die etwas dürftige Beschreibung. Auch die Videos auf der Herstellerseite bringen nicht mehr. Wünschenwert wären Beispiele praktischer Messungen. Ansonsten: Sehr zu empfehlen.
Recommended Products
