Your cart is empty.
Your cart is empty.Product Description
DESIGNED FOR MOST COMPUTER TOWERS
SPECS:
- Material: Carbon Steel
- Weight Capacity: 44 lbs
- Mounting: Under Desk Mounted
- Height Adjustment: 5.1" to 20.8"
- Width Adjustment: 6.3" to 10.2"
- Recommended Desk Thickness: >5/8in
- Swivel: 360°
Flower Knob
Protective Pads
Gripper design
Secures to Desktop
Berserk
2025-08-29 16:11:17
This was perfect for my wife's setup at home, she has a standing motorized desk whereas I have a manual standing desk (working on fixing that soon) but this thing was perfect for what we needed.It is a bit hard to install but once you have the first screw in, it is smooth sailing after that. Still you need like 4 arms just to get the first screw in.Her desktop was a bit large for the dimensions but seemed to fit just right once I adjusted it to fit.Word of caution, it will hold your tower in the center of the bottom and WILL block air flow from the bottom of the case so keep this in mind when mounting, there is room to move a PC forward and back but only a little. If you have a large tower like my wife's, then it will sit directly on the air vents for the bottom, luckily, nearly all the air flow moves from the front to the back and top so no hard no foul.
Ben
2025-08-23 17:47:01
This CPU holder works exactly as intended. It is sturdy, attaches easily and strongly and has shown no signs of 'loosening' over time. My only gripe is the size of the base. It that was a little bigger this would be amazing, but many towers are on feet (so fans can pull air from the bottom) and the feet tend to only be partially on. I am able to make it work, but it is a bit risky. If the base was 3-4 inches 'longer' it would be fantastic.
Darrell Clarke
2025-08-22 13:36:22
Arrived on time. Ease of installation was less than fifteen minutes. It holds my tower and swivels for east plugging/unplugging of UBS and other accessories. I am actually thinking about getting one for my kids towers for installation under their desks.
Jeff B
2025-08-21 11:03:46
I got this when I got an adjustable height desk to prevent any issues when raising or lowering it. It was easy to install (four screws into the desk underside) and holds my full size desktop PC with no issue. The "grip" of the mount slides up and down and can extend easily to fit most any PC and the hold is solid. I've checked it a couple times just to make sure it didn't loosen up over time and it hasn't. It can also rotate on the mount making checking cables very easy as well.
Chuck H.
2025-08-18 16:42:51
Got this from Eureka because I got one of their gaming tables and needed to get the computer off the floor. It holds it however, the screws are not self tappers, you will need to predrilled the holes. If your case has feet they will need to be removed or the computer may be crooked. It also spins real easy. Great for when you doing setup but after that it can get annoying chasing your computer as it spins. But once you know these things it is still a good product and useful. Now I can vacuum around the desk.
Patrick L
2025-07-15 10:31:06
Well built. You can see the quality in the welds. The design is very simple and low profile. Super easy to install. It is also wide enough to fit my 8.5in wide tower unlike many others. It is a little pricey but you get what you pay for. Oh and it comes with a nice Phillips head screwdriver as a bonus. You can tell they didn’t cheap out. Overall very satisfied!
CarolinaEd
2025-06-26 17:59:50
Installation was easy and it works well to keep a unit off the floor and secure. I'm using it a small form factor (not the micro PCs) and it's not as good for that. Had to do a bit of engineering with some wood in my basement to secure it in the desk mount. Bracket would not adjust in enough to secure it by itself.
Luke Huffman
2025-04-30 18:21:53
This item fails to support the computer evenly, causing it to tilt to one side and putting strain on the screws that are holding to the desk. I combined this with a Eureka desk, which I now regret. Regrettably, the return period ended just as the “holder†completely backed out of the top side of the desk.Don’t let the photos deceive you, I promise your computer won’t sit in this effectively!Attached are photos of the damage done to the desk from the poor design.
emanon
2025-04-03 14:38:49
Für meinen neuen PC und meinen neuen Homeoffice-Arbeitsplatz wollte ich unbedingt eine UNtertischhalterung, damit der Arbeitsplatz so aufgeräumt wie möglich ist (in der Theorie...;-) )Leider sind die meisten Halterungen erher "wobbelig", sodass die PC's sich leicht zur Seite neigen.Bei diesem hier ist das aufgrund der Bauweise mit dem Rohr eben nicht der Fall.Die Konstruktion bewirkt auch, dass sich der Rechner schwenken lässt- was den Anschluss der Kabelage deutlich erleichtert.Montage war einfach- allerdings habe ich mir in meine Massivholztischplatte Einschraubmuttern M6 eingesetzt, da ich nicht riskieren will, dass 6 popelige Holzschrauben dem geballten Gewicht meines Rechners irgendwann nachgeben und er mit 1g aus der Stehposition des Schreibtisches nach unten beschleunigt.Fazit: Preis-Leistung gut, würde ich wieder kaufen.
Squimby
2025-03-18 18:38:16
This is simple and does exactly what you'd expect. It allows you to rotate the PC which makes for easy plugging in of cables.Would buy again.
Aaron W.
2025-01-27 15:36:37
It's great, a life changer. I'll never keep a pc on the floor or desk again. Attaching to desk is a bit scary, but do it properly and you will be fine. (there are no pre drilled holes)Drill your own holes mate.
Kunde
2024-12-01 14:43:35
Hatte erst bedenken wegen des hohen Preises aber die PC-Halterung ist absolut ihr Geld wert. Sehr stabil trotz Drehbarkeit. Mein PC ist deutlich breiter als der Teil wo der PC drauf steht aber durch die Halterung oben steht der PC auf zwei der eigenen Füßen sodass sogar Luft drunter kommt trotzdem wackelt nichts. Einen knappen Monat ist die Halterung nun angebracht bisher ohne Probleme. Ob sich in Jahren aufgrund des Gewichts etwas löst glaube ich auch nicht. Die Schrauben erscheinen ausreichend.Kaufempfehlung von mir aber auf die Maße achten je nachdem wie/wo man die Halterung am eigenen Schreibtisch anbringen will und abhängig der Maße des PCs. Hatte oben nur wenige cm Luft am Ende wegen einer Leiste unter der Tischplatte. Durch die gute Beschreibung (und andere Bewertungen) aber alles wie erwartet.
PapiBoustache
2024-11-13 20:21:37
Manque les cales en plastique
Recommended Products
$24.99
$ 11 .99 $11.99