Your cart is empty.
Your cart is empty.Product Description
EWCS Welding Cable Specs
Proudly Made in the USA
Electric Wire & Cable Specialists (EWCS) has been in business since 1994, offering our customers a complete source of supply for various types of industrial and electronic wire and cable.
We take pride in our specialty: fulfilling your wire & cable needs for all your projects and requirements.
Eric J.
2025-09-07 18:06:41
I needed some 1/0 copper wire for hooking up an inverter in our travel trailer. The first place I tried was a local big-box home improvement store which starts with "L" and ends with "owe's". They did have 1/0 copper wire, but it was really stiff. I think I could have built a pair of stilts with the stuff. Not good for my project. Next, I tried another local big-box home improvement store which starts with an "H," and they had what appeared to be the same stuff. Not quite as stiff as a 2 X 4, but it certainly wasn't going to make any sharp corners easily. Third was a local place which sells batteries and accessories. I can't remember what letter their names starts with. They had wonderfully flexible 1/0 copper wire, but it cost a LOT more than the really stiff stuff. Finally, I went to Amazon and took a chance on this wire, and it's been great. I've made up several battery cables, and this 1/0 wire is very flexible and a joy to work with.
sandy b.
2025-09-03 20:12:08
Product was packaged very good,delivered on time.I used this for a starter cable on a pro street car.very good quality.
Rivera
2025-08-02 12:52:58
insulation is nice and tight but remains flexible. Wires nice and tight. Not straight and loose but in multiple bundles
Joni Mire
2025-05-30 09:08:27
well... i got 20' of 1/0 and prob gonna order more. u can't get much better quality imho. does perfect offset bends and 3" radius bends. it fits readily in 3/4" split conduit. the resistance across 10ft is about ~0.6ohms to my second aux battery. I soldered and crimped. lugs on with a rosebud but you have to be gentle on assembly because strands are fine as hair. also this wire sucks solder like desoldering braid. a test 6" peice became silver solid core when I used too much solder-.- I highly recomend the fill lug with solder method then crimp while hot but solidified. lugs if good quality fit perfect. the jacket feels like automotive silicone type. highly recomend getting a proper 1/0 stripping tool as I have tried all types of removing jacket but always end up cutting or nicking serval strands. note: this this a silverado full rewire to 1/0 @300amp. redarc isoalators and back charging from a 40amp solar array. your results may vary as I am using for capacity and lossless power delivery.
Joshua H. Taylor
2025-01-27 19:38:23
Ordered the 15ft cables and realized they werent at long as I thought. Didnt measure them but compared to my 15ft fuel line it was about a foot shorter so I ordered the 10ft to make up for the needed cable. Vable is excellent quality and flexible as described.
Basshead
2025-01-21 14:37:05
Running 230 about through this and no problems what so ever. Full cook kale through whole run
SNJ
2025-01-05 10:05:44
I bought this 1/0 gauge cable to fit in my own DINSE 10-25 connector, since the connector measured exactly 3/8â€, and the cable was supposed to be 0.373†diameter. Well, when I stripped the cable, it measured 0.42â€, a little thicker than 0.373â€. A little disappointed that I had to make it work, but then again, I have to make my projects work 99% of the time anyway. Cut off several strands and fit right in. 0.373†holds 300 amps anyways.
Alex
2024-11-16 14:36:08
True to size full copper cable, very satisfied. If you’re using this wire for car audio i 100% recommend it. Put it up to the old 4 gauge cable for picture reference and the difference seriously shows. Amps are getting full power now. ðŸ‘
Recommended Products
$396.17
$ 99 .00 $99.00