Your cart is empty.
Your cart is empty.The E-Z Fletch "Mini" lets you fletch short BLAZER style vanes up to 2 ¼” with maximum helical for more accurate arrow flight. This is specifically designed for shooting tighter, more consistent groups when shooting with broadheads. The Mini is perfect for carbon arrows, 5/16” (.3125) diameter or smaller.
Roger Stanfill II
2025-09-03 20:52:51
I need the large not the mini but this is really nice too , I will order the large full size now and just have both best fletching jig out there!!
rich
2025-08-21 12:04:04
If you're a beginner or even experienced at fletching your own arrows this thing is fool proof.
marlaynaconcannon
2025-07-11 10:30:51
The media could not be loaded.
John Yang
2025-07-08 16:11:38
So far I love the new jig. Definitely cut down on time, easy to use, and the helical has been consistent.
Buster
2025-06-22 20:18:31
Very nice and quite simple to set all 3 vanes at once. Accuracy is good. I glued blazer vanes on 4 arrows and have been shooting them for awhile, probably 100 times each. Absolutely no failures or loose vanes! Accuracy is as good as any arrows I have used in the past. I fully intend to fletch my hunting arrows with the EZ fletch for this falls hunting.
Jbowman
2025-06-16 15:27:12
Easy to use well worth the $$$
Andrew Haight
2025-05-06 14:55:06
The idea of fletching 3 vanes at once seems like you'd sacrifice some accuracy but I've had excellent results. Super quick and easy. I think the true helical design makes a difference. It's a pretty aggressive helical. Think it's 3 degrees and it's not just offset like most jigs do. I haven't done and testing but to me it seems to really do a good job stabilizing the flight of my 550 grain arrow and makes the Bohning Blazer do the work of directing the arrow with a fixed broadhead attached.
zeth1560
2025-02-16 10:07:42
On the plus side, this jig makes applying vanes super quick...when it works. Three vanes at once...when it works.The problem I have is that it doesn't work that well for me. I am not new to applying vanes, but I struggle to get all three vanes to adhere correctly. Plus, even though I only use the small amount of glue recommended by the vane manufacturer, the slots on this jig keeps getting crusted over, creating odd pressure points between the plastic of the jig and the rubber of the vanes. As a result, the jig does not consistently apply pressure to the vanes, and sometimes even pulls them off when opening the jig up. I have to routinely scrape out the residue, or use acetone to clean things off...and with the added time I have to spend on maintaining the jig, I could probably applied three vanes using a normal jig.That all said, I love the idea of this product. And when it does work...it is a true treat to use. But when it doesn't work just right...it is a pain.
Recommended Products
