Your cart is empty.
Your cart is empty.Product Description
Our patented designs and great quality sets our brand apart.
Our EZ Lip Front Splitter PRO offers our strongest and most durable Dura-X Foam material for longer life.
Universal Fit design for EZ Installation. No drilling or screws required!
Hide existing damage and prevents new damage from everyday driving hazards such as speed bumps, driveways and parking curbs.
Explore our Features & Benefits:
-
Fast & Easy Installation
- No drilling or screws required
- Works on most cars and trucks
-
Handles All Conditions and Weather
- Protects from costly paint damage
- 3M adhesive with all-weather durability
-
Made in the USA
- Customizable
- Compatible on front, sides or rear
-
Lower your car by up to 2 inches
- Get a lowered look in minutes
- Transforms the look of your car
Our products can be installed on any vehicle, including Dodge Chargers, Tesla, Subaru, Volkswagen, and more!
-
Installation: Step 1
Peel protective film from tape starting at one end of the Front Splitter and attach to surface of vehicle.
-
Installation: Step 2
Firmly press and hold the Front Splitter for several seconds against the surface of your vehicle. Make sure there are no air bubbles or gaps.
-
Installation: Step 3
Cut excess off with scissors.
Front Splitter PRO
Compare our Splitters
2 inches | Lowers your car by | 1 inch |
4/5 | Durability | 3/5 |
| | 3M adhesive | |
| | Dura-X Foam | |
| | InvisEdge | |
Dual-Edge Protection | ||
Serrated Adhesive |
2 inches | Lowers your car by | 2 inches |
4/5 | Durability | 5/5 |
| | 3M adhesive | |
| | Dura-X Foam | |
| | InvisEdge | |
Dual-Edge Protection | | |
Serrated Adhesive | |
- Front Splitter
- Front Splitter MAX
BMW M3 E36-Ironman Fanatic
2025-09-03 14:53:49
Installed on hot day, no issues with adhesion. Simple install, and good fit. Now BMW M3 looks fantastic.
Anthony Gabelman
2025-08-19 17:32:19
I never care to leave reviews, I saw this product, decent price and seemed like the reviews were okay, so I gave it a shot. I kind of figured it wouldn’t work out and I was just going to return it. It got here in one day, that alone was nice but that was more Amazon’s doing then the product, but I opened up the package, grabbed some scissors and ran outside to put it on, please note that it had just rained that day so my car was wet and muddy. I peeled the tape off and stuck it on, be careful as to stick it on exactly where you want because it will stick hard immediately. I cut the excess off with the scissors and boom, was done in maybe 8min or less. I used a Ryobi heat gun after it was stuck on just to get the adhesive a little more stuck on. So far it’s been a few days and it’s been through a rain and a car wash. It’s stuck on perfectly, and looks fantastic. This is a must buy.
Customer
2025-07-24 13:32:01
I had the original EZ Lip on my car before the EZ Lip PRO. The original held up well, stayed on clean and easy for over 3 months no problem. I bottomed out on it quite a few times, and it did a great job on protecting the underside of the bumper. I removed it, replaced it with the EZ Lip PRO hoping for a better look and even more protection. It lasted about a week before the adhesive started to give, the lip started to droop. As you can see by the pictures, after only about 3 weeks, it looks absolutely terrible! The adhesive gets weak and falls off the bumper but stays strong enough to build up dirt and grime. It no longer looks like a lip.I conducted the install the proper way. Wash with dish soap to remove wax, alcohol surface prep, install the lip with a heat gun to help the adhesive and let it cure for 24 hours while putting blocks under the lip to support the contact surface. IT STILL managed to end up like this. I'd stay away and save your money for a full bolt-on/drill-on lip. I loved EZ Lip before this experience, now this experience has ruined EZ Lip in general for me.
Christopher Gonzalez
2025-07-20 18:15:53
Overall this did add the more aggressive look I was going for with my Cx-5, HOWEVER, this product will not adhere well without something called an adhesion promoter. It’s pretty inexpensive and definitely worth it so you don’t waste 60+ dollars like I did. I originally bought it straight from the manufacturers website and cleaned off the surface with isopropyl alcohol, but even then it ended up sagging on the ends and in one spot in the middle even after applying heat to the adhesive.I knew about adhesion promoter from working in aviation applying decals to aircraft and I’m gonna say it’s almost required so that the install goes smooth and last.I also ended up cutting triangles like the max includes already from their product line but I’m not sure if you’ll need to do that.But the adhesion promoter is a MUST
Isaac
2025-07-15 16:08:12
It has been 2 weeks since I installed the lip and can say it does the job. Remember to always clean with isopropyl alcohol before applying. I noticed the adhesive on the ends wasn't really holding so I ended up adding heavy duty 3m double sided tape which helped fastened the ends. The adhesive in the middle holds up very well. I have taken it to one car wash 1 week after letting the adhesive settle in and the lip still holds.
Ben
2025-07-01 17:34:59
Fell off in the middle. I followed every step and it said to use button and the side parts looked fine so I cut the center and used as a splitter instead of a body kit in front for full lip the side skirts are awesome look great work perfect this looked really good when it was on I mean I would have give it 6 stars because it exceeded my expectations but the adhesive gave out because it prolly was too heavy honestly I don't want to drill through my car so I would have been happy to give up fantastic recommendation for this product if it wouldn't have gave out after following every step perfectly and watching the videos like they recommended I hated it but the heat gun I held it on I pressed for me I went back and pressed again made sure it was on and fell off after one day soon as I got on freeway it started giving so I would take my time and make sure that it is on securely and give it a couple days maybe if you're going to get it. Looked great though. No easy ezlip stickers like the video said disappointed I would rep'd ez lip on my window.
Lindsey
2025-06-21 18:14:18
Went on alright, looked good, actually really disappointed with the amount of money you spend on it and once the corners start peeling, there's no fixing it. Should have a peice that wraps around the wheel well to make the corners stay especially if you live in the midwest with all different weather. Extremely sad and disappointed.
Blayne T
2025-06-05 11:24:11
Very easy to to apply fits any front bumper and makes the car looks more sporty which I love. Gonna be trying the side skirts next.
justin
2025-02-21 16:45:29
Pretty pricey stuff for foam with a 3M adhesive strip on it but the quality is good and it's a unique product that adds a personal style to a car/truck/SUV.Once it's stuck on it seems to really hold quite well. Just prep the surface with rubbing alcohol or other paint safe solvent.
Gylmaar
2025-02-01 16:56:10
Me gusto que venga listo con cinta 3M para instalarse pero qun asi no hay que confiarse y mejor poner al menos 3 pijas para que no caiga a mitad de camino
Michael Nothnagel
2024-12-15 12:48:53
Alles so beschrieben.Allerdings löst sich nach ca. 3 Monaten der Kleber obwohl ich mich explizit an die Montageanleitung gehalten habe.Ich musste mit Klebstoff nachhelfen.
paco
2024-11-24 17:41:59
Super bonne adhérence rajout de quelque rivet attention à bien positionner dès les débuts
Alejandro
2024-11-15 13:20:20
Simplemente perfecto. Pega muy bien la cinta pero yo puse unos tornillos ya que sin el ya me pegaba en el garaje la defensa y por asegurar.... pero buena calidad y rapido de instalar. El precio un poco caro pero habia probado los baratos y nada que ver con este
Recommended Products