Shopping Cart

Your cart is empty.

Your cart is empty.

E-Z Red S102 Anti-Freeze Hydrometer

Free shipping on orders over $29.99

$12.31

$ 5 .99 $5.99

In Stock

About this item

  • FAST AND ACCURATE: The EZRED anti-freeze coolant Hydrometer offers a quick and easy to read level.
  • EASY TO USE: This Antifreeze hydrometer uses a proprietary method to provide the most accurate results in an extremely easy to read way.
  • PROFESSIONAL AND HOME USE: EZRED’s S102 antifreeze coolant tester shows results in both °C and °F which offers a wide range of use.
  • BUILT TO LAST: This antifreeze coolant tester is made of very strong materials and is resistant to dirt, grim, grease and most drops.
  • MADE IN THE USA: This antifreeze coolant tester is made is the United States of America
  • WIDE RANGE OF READINGS: Read from +32°F(0°C) all the way to -60°F(50°C


The E-Z Red anti-freeze hydrometer is made to stand up tough treatment in service stations and garages. It's designed so that both customers and technicians can see the state of the anti-freeze. This coolant tester is economical; your first cost is your only cost. There is no need for replacement parts, and it has rugged construction and unbeatable quality. There is no difficult float reading to be observed and no temperature tables required.


princess
2025-08-30 18:09:32
I've done auto repair most of my life. And, I've used a wide variety of anti-freeze hydrometers to check the level of protection. In almost every case, I've typically used the Auto Parts Store units, or good old Wal-Mart... In every case, almost without exception, I've gotten INACCURATE READINGS. The E-Z Red S102 Anti-Freeze Hydrometer really works perfectly. Its inexpensive, and effective. What more can anyone ask for.Side Note: Make sure that the White Disk inside the Hydrometer moves smoothly up and down without sticking, or rubbing against the clear plastic case. It must move freely up and down to give an accurate reading. If you happen to get one that "sticks", Either Return it for a replacement, or contact EZRED.Com for a replacement. Their warranty is terrific.Rayko
Customer
2025-08-26 13:12:44
Purchased this right in time before the coldest temperatures in decades would hit town (-30°F). I checked both my vehicles and while one had coolant good to -50°F, my truck only would be good to -18°F. These numbers are an approximate since you have to level the device in order to get good readings, but considering the given -30°F it was clear to me that the truck wouldn't survive this cold. I left the truck running during the day when outside, and only turned it off only when back in the heated garage.If I could take half a star off I would do it; the reason is that it is somewhat difficult to level it. I wish one side would have a straight edge so it could be held against a wall for more consistent readings, but other than this it is a great quick and easy to use tool to get the coolant mix in the right ballpark.
Michael Barnes
2025-08-06 12:55:27
The first thing I did was check the accuracy with a purchased 50/50 diluted antifreeze and it was pretty accurate, maybe off by 3 degrees, but for its purpose accurate. In comparison I had a brand new Prestone brand tester that wouldn't even register. It was free to move but the scale started at 0 so at least 35 degrees off. This unit has a starting temp of +32 so pure water would at least cause some movement. The red numbers on the scale don't offer much contrast and are somewhat hard to read though. Keeping the unit level during measuring really isn't a problem since I just align the water level with the embossed wording on the back side that they are parallel to each other. Accuracy is the key for me. I'd deduct 1/2 point because of the faint red lettering though or no contrast.
J
2025-07-25 18:05:02
Only tells you the freezing point, meanwhile other products tell you the boiling point as well. Not like it really matters anyways, would just be nice to know.Not really a clear indication of where exactly the 50/50 line is, going to assume that it's the 36.7 degree mark. For some reason the fill line is also on the back side?
Jerry and Sally Lange
2025-07-06 19:21:42
I’d buy again
B
2025-06-28 12:20:12
Nice product. Fast shipping
Marco
2025-06-26 12:45:04
Great product for testing antifreeze.The numbers and letters are embossed in the plastic for true readings.Great product !
Mark Opti
2025-06-20 17:01:26
See attached pictures:- it shows incorrect 10 F for distilled water ( should be 32F)- acrylic case grinded to smooth imperfections ( looks ugly)Return was easyI do NOT recommend this product
Katherine D. Wittmann
2025-06-06 16:57:51
After reading many reviews, I bought this one and was not disappointed. It's well made with quality materials and has been very helpful for our household. Would definitely recommend it.
Alejandro j m
2025-05-18 16:32:27
Very good tool to have in order to mix your pure antifreeze... good quality... but the most important thing it that's the job I will recommend
Nela Reviewing
2025-04-28 14:50:00
As described. However, it seems to measure the coolant in both of my vehicles as good to -60*F ... and that just doesn't sound right to me as it should be between -40 and -45*F. Time will tell. I was going to buy the E-Z Red battery tester but I think I'll hold off for now.
Rockcrusher
2025-03-20 10:14:43
Used this one when I was a apprentice...in 1978 the new ones just don't work for me. Nice to see it was assembled in canada as well :) will only lend out the other one ... :) Oh the bulb is black like the old one You can easily read this one. The rubber where it joins the plastic is bent as it is stuffed in the box just heat it up with a heat gun and massage it straight. and you got a nice antifreeze tester. Oh I am a mechanic of 40 plus years and a real fuss butt. ( I bought 2 )
Customer
2025-01-12 11:45:01
Well made, works as it should
Recommended Products

$46.03

$ 20 .99 $20.99

4.4
Select Option

$7.95

$ 3 .99 $3.99

4.7
Select Option