Your cart is empty.
Your cart is empty.Product Description
- This Bicycle Repair Stand is really convenient for maintain your bicycle in any position which is convenient for you to work.
- It feature a special design, the bicycle fastener that can be rotated 360 degree, otherwise it has an adjustable handlebar which can hold the front wheel that makes the work easier.
- The bicycle repair stand can hold the max weight about 66lbs with the heavy duty clamps.
- This repair stand has a lot of legs so that it can stand firmly.
- The distinctive feature is its lightweight and the stability.
Designed for different height people
- Good quality clamps hold tight without damage your bike's finish;
- Overall Size: 41.33"(L) x 41.33"(W) x 74.01"(H)
- Foldable Size: 39.37" x 3.93" x 3.93"
- Adjustable handlebar rod stabilizes the front wheel;
- Pre-drilled holes in feet for anchoring to surfaces;
- Maximum capacity: 66lbs;
- Material: Q195 Steel
- Includes: 1 x Bicycle Repair Stand ; 1 x Tools Tray ; 1 x Adjustable Handlebar Rod ; 1 x Hex Key ; 1x Manual
Smart Humanity Design for Adding Convenience!
- 360 degrees rotating clamp allows your bike to be held in any position
- The adjustable clamp fits for different diameter of bike tubes
- The rotating head adjusts to any angle
- Lock the clamp arm and clamp your bike where you want it
- Work egonomically, no more bending at awkward positions!
Simple to Fold
- Just stick it in the corner of the garage until next time or put in the trunk for easy transport to your next race
- Easy to set up and easy to store.
- The quick release clamps make adjusting the stand simple.
Tool Tray
- There are tool holes and the middle part of the tool tray contains magnetic strips, so that small screws, small nails, etc. are placed neatly
- Tool Tray: 9.84(L)"x 5.11"(W)
Designed Feet for Stability
- The four-legged structure keeps it stable at all times, and the feet can even be fixed to the ground to enhance its stability
- Made from durable steel construction, four legs make this bike workstand super stable
HRC
2025-08-01 15:23:44
Sturdy and stable. I have taken up biking and it helps me refine my gear setup.
Tim Russell
2025-07-28 10:11:12
I had used one of Park's bike vise stands before years ago to build a bike and what a great help it was to use. I had been wanting one but they are so expensive THIS one does the job just as well and is affordable. I just got it so we will see how it holds up but it is sturdy.
SavvyShopper
2025-06-21 12:23:34
If you do you’re own bike maintenance and light repair you can’t beat this repair stand for the money. It’s sturdy and holds up my 31 lbs. MTB without slipping. The frame tubes on my bike are a bit large for the plastic clamp but I can get them fit however the seat tube is easiest to use.The legs take up a large footprint but provide a very stable work environment. The stand is all metal and is well made. The clamp and tension adjustment knobs are plastic and a bit flimsy but they seem to get the job done.I deducted 1 star because it was poorly packed resulting in one of the plastic tabs that hold the rubber retaining straps on the front wheel holding arm was broken off but I was able to easily repair it.All said this is not a professional repair stand but if you work on your bike about once a week or so, you just can’t beat it for the price. I would buy it again.
Lynn
2025-06-13 20:31:16
A nice rack for you bike. A great buy at 50.00. Easy to assemble, store, and use. Makes tune ups and even oiling the chain much easier and more efficient.
unhappy
2025-05-10 17:31:55
The bike rack will do for what it is and the cost. Sturdy overall, but as others have pointed out, if where you clamp your bike makes it off balanced (if you clamp on the seat post) the pole the clamp is on will rotate and not keep the bike straight. Overall for the cost, we'll worth it. Should be able to diy something to keep the clamp from spinning. FedEx delivery horrible!
Star
2025-04-26 15:23:42
Works as expected, very well built
TDubs
2025-03-17 15:04:02
We bought this on sale and with a coupon. We thought that it would work out for quick mountain bike maintenance. It has proven itself to be much more than that. This stand is extremely easy to work with. Setting it up is a breeze. Adjusting it from one bike to another is a cinch. We had looked at other more expensive stands with the thought that they would be much better. This stand is every bit as good as the expensive ones. I like the magnetic strip on the tool shelf as it proved itself time and time again. Changing the angle of a bike while on the stand is very easy. If I were to change anything in the design, it would be the knobs. I would change them to cam levers such as are on a bicycle. But that's just me being fussy. It's a great stand as it is and very strong. We have mounted Specialized Rockhoppers, Stumpjumpers, road bikes, and kids bikes with ease. When removing something from a bike with weight, the frame does not rotate or move. It stays solid to the setting on the stand. I am very impressed with this stand.
Henry H.
2024-12-13 18:09:45
Bike handle cannot hold weight of the bike, everything else on the stand is great however when placing the bike and trying to rotate it to get a better angle it does not hold, the handle to tighten, is not strong enough and there is no grip on the bar, so it just slides out of angle. best way fix is just adding sand paper and tighten the sand paper keeps the bar from rotating.
Recommended Products