Your cart is empty.
Your cart is empty.Product Description
Assembly item siz
- 33 2/3 inch L x 21 2/3 inch W x 33 inch H
- The printing area measures 7'' wide and 20.87" tall, and even can hold artwork over 1m1
swank
2025-08-04 20:47:48
We have both the Canvas and Metal Print Racks, they are well made, easy to assemble with quality finishes.Additionally, their customer service is very admirable!
mmg
2025-07-27 10:09:25
This is the second art rack I have purchased for use at a small museum I manage. We use these racks to display photographs, mounted textiles, and unframed paintings. The first rack that we bought from a different manufacturer was a nightmare to assemble. This rack went together easily. All parts were include as well as a tool to assemble the rack. All the holes were properly aligned. An extra bolt was included. The only thing I noticed is that the 6.5" floor piece at the bottom of the frame that the art sits on is not attached in any way. There are holes drilled in the floor piece but no matching holes in the frame. The floor piece sits on the frame without a problem so the only time it matters is when transporting the rack. I attached the floor piece to the frame with a couple pieces of Velcro for moving purposes. Assembly took less than an hour. If we need more racks this is the brand we will buy.
Scism
2025-07-13 10:59:37
These work perfectly. Well made. Easy to assemble. Very sturdy.
Shipdriver54
2025-06-20 14:41:03
Seller provided excellent service. The product is mis engineered however. The flat bottom tray piece that is placed into the print holder doesn't exactly fit and strangely there is a bolt hole cut on each end of the piece but there isn't a bolt hole on the frame so one wonders why that wasn't finished. The tray is a little wobbly and just does't fit snugly. I double checked the alignment of the side and the installed poles and that is correct with equal pressure on all pole screws installed. Had trouble locating 4 of the black screws an finally found them in the caster spaces wedged in. Irritating, the screws should all be placed in a stand alone plastic wrapper and not loose with the basters. Black screws wedged into the caster spaces not visible, black on black. The product will work for my gallery however not sure I would order it again.
Michael J. Kuehne
2025-06-02 17:43:49
In my record shop I started selling prints. I've had lots of "do it yourself" set ups that really didn't work. This is sturdy and can be rolled around.
Ben Thar
2025-05-30 13:50:14
I have owned other metal print racks and the design and sturdiness of this unit is far superior and assembly wax straightforward and easily done.
Customer
2025-04-27 15:06:01
Perfect for keeping teaching charts organized and handy in classroom.
Short Tee
2025-01-22 14:06:25
Looks okay and sturdy… It also came with no instructions... no diagram nothing at all had to pull it back up on amazon to see picture so I could make sure I send putting it together right..? I had to return the first one because it had no trends for wheels to strew in.
Yogiboc
2024-12-27 12:22:55
One of the support legs is not attached and I have cable tied it together at the base section and the centre tray piece does not fit properly at all. Shame as the item is a nice large size and a sturdy style but the quality of the item is not good. It was not cheap either so I expected much better.
Geoff
2024-12-06 18:51:31
The item is exactly what I wanted and easily supports several medium to medium-large sized paintings. What most impressed me, however, was the seller's responsiveness and support. I would buy from them again in a heartbeat! :-)
Recommended Products