Your cart is empty.
Your cart is empty.Product Description
FARBIN Snail Horn for Car
Material:Plastic
Voltage:12 Volts
Single speaker: 510HZ single tweeter / 410HZ single bass
This product has a novel design concept, reasonable structure and superior performance. Its pronunciation is bright and pleasing, sealed and waterproof, resistant to vibration, can withstand the test temperature of minus 40 ° C to 90 ° C, continuous sounding more than 200,000 times or more audio stability.
Full copper coil
Low resistance, high strength,long life.
Can withstand high current surges.
----------PK----------
Aluminum wire coil: Not comparable to copper coils
Copper plug
Copper plug: better conductivity.
----------PK----------
Iron plug: rusting leads to poor power supply.
Shell thickening
Pure copper nickel-plated plug.
Will not rust, and have better power performance.
High-decibel
Sound pressure level can reach 130 decibels.The design of the generous mouth, the sound spreads farther.
Vic T
2025-09-01 13:20:47
Horn seems to be well made (510 Hz horn) and is loud and small - easy to mount. There was an issue with the product I received initially, and the seller provided help promptly to solve the issue.
hNodazzz
2025-07-22 13:53:07
just as advertised...highly recommend
Lloyd
2025-07-20 15:52:20
I have a 2022 Yamaha Tracer 9 GT and this horn is plug and play meaning you just unplug your horn and plug it in to this horn and it's ready to save your life, it's very loud. I bought the low sound and it is just like a car horn. I'm very happy with this horn. I did a lot of horn research and bought this one and I'm glad I did. I will definitely be heard now. ðŸ‘ðŸ‘UPDATE::: 8•24•23After trying this horn out on my bike, I found that it was hitting the front fender and marked up my paint pretty badly. I ended up luckily waxing off the marks and I took a hacksaw and cut the trumpet mostly off then file it to smoothness then bending the mounting bracket to an L shape then mounting it as high as I could go without it rubbing on the upper parts when turning the handlebars side to side. I measured the distance on the shocks if they ever were to go full length on a front braking situation then I measured the distance between the fender and the bottom of the horn and it looks like it should be good to go.
SCOTT ROBINSON
2025-07-08 13:14:57
Well, it was easy installation and I mean it works, but just not as loud as I thought or expected it would be, but it’s a horn🙄🙄
Rudder
2025-05-26 12:45:05
I assume it can be utilized with a high low horn. I just used this one to replace one of my UTV. It’s loud. Install went very good. All the parts and support brackets I needed were there very happy with it. It has good sound too.
Axel
2025-05-02 12:57:49
Perfect replacement for my Nissan Frontier LE 2005. Literally took my about 5 minutes to install. Didn't have to cut or attach the new cables since the OEM ones fit perfectly on the horn's ends. Only used the new horn and the nut included and that's it. Sounds decent, way better than what I had (no sound and dying sound). My car model uses only one horn so I did not try to fit a 2 horn system, and there really was no need to. Hope it lasts long, although it is really cheap so wouldn't bother to buy another one if this one dies fast.
Richard Portier
2025-04-09 10:44:09
Instructions are useless. None of the diagrams provide enough information to understand what to do.
Ken Kyle
2025-04-07 10:57:26
Perfect. Now my little 450cc Honda doesn't sound like a little 450cc bike. When I need to honk, people will hear it and take notice.
Erwin
2024-11-15 16:46:02
Loud and easy to install
Recommended Products