Your cart is empty.
Your cart is empty.Product Description
Thermally protected. UL recognized. CSA or ULc certified. Centrifugal blower with sleeve bearing. CFM at Static Pressure as follows: 66 at 0.1", 62 at 0.2", 53 at 0.3", 52 at 0.4", 47 at 0.5", 42 at 0.6" and 23 at 0.7". 60Hz Frequency. 2800rpm at free air. 115 Volt. 1 Speed. 0.95 amps at free air. Nameplate CFM: 75.
From the Manufacturer
For nearly a century, Fasco has been designing and manufacturing what has become the industry's most respected line of AC motors and blowers. Fasco A082 75 CFM 115 Volt 3000 RPM Blower Assembly is a Centrifugal Blower Assembly.
RJB
2025-09-03 21:54:15
I bought this blower to replace the combustion fan in my St Croix Prescott EXL pellet stove. I can't seem to get one of these fans to last more than 3 seasons. The St Croix blower from the dealer comes with the Fasco fan motor and housing for $160.00. I always just replace the fan motor and gasket, so I have several spare housings laying around. This blower/motor is virtually identical to the St Croix version, however, it is not a direct bolt in replacement. It requires a little modification, so it's best to do this prep work beforehand. Physically, remove the new fan/impeller, remove the new motor/fan from it's housing and mounting plate, drill out the three mounting holes to a larger size, transfer the rubber isolators from your old motor to the new one (keeps the unit quiet), and reassemble onto a spare St Croix mounting plate/housing. I usually cut myself a new Kaowool gasket at this time. Electrically, cut off the three wires with the correct connectors from the old motor, and solder or crimp them onto the new motor wires. At this point, I put it on the bench and test it with some line voltage. Now I keep this one on hand for the next time the one in the stove seizes up. The motor/fan can be replaced in less than a half hour. If you are mechanically inclined, with an hour's work, you can save yourself 60 bucks by using this blower.
NWJeeper
2025-08-13 16:14:04
We needed a replacement exhaust motor for our Kozi model 100 pellet stove but local shops wanted over $200 for the motor and even another seller here on Amazon wants $185 so I did some research and found that the A082 assembly uses the exact same motor (Fasco #7021-9081, U21B). This is a genuine Fasco motor, not a knock off. All I needed to do was remove the motor from the housing and install it onto the mounting plate for our stove. It works great. The description notes it as a 2800RPM motor however the data plate on the motor states 3000rpm. I am so sick of local stores trying to price gouge their customers with huge mark-ups in price. I usually try and support my local shop but not when they are trying to rape me for over $200 for a motor that costs them $45. Thanks to this seller (Patricks supply) for selling at a reasonable price.
john
2025-08-11 17:04:41
Very nice
Customer
2025-07-22 12:49:47
Product worked very well for my coal furnace, the cost was half of what local supply store wanted for the same model.
Tracy P.
2025-07-20 12:10:45
This blower fit my keystoker rice coal stove almost perfectly. I needed to twist off one of the tabs; my old blower only needed 4 screws, but all the others lined up perfectly so this was an easy fix. Don't forget to get a gasket and some high temperature caulk to finish this off. You won't be disappointed!
Scott B Parks
2025-07-03 16:56:20
Very happy to find this exact replacement combustion blower for my old Harmon Invincible. This will be my stoves third combustion blower over 25 years of use!My local shop has zero parts for a stove of this age. That disappoints me, but what can you do? If my controller board goes bad, I'll probably be forced to purchase another stove.
Heath24333
2025-04-30 21:40:25
Works great, went right on, have plenty of air flow again!
John e.
2025-04-21 12:02:08
Pellet stove exchaust gas’s fan. Need to figure out how to activate the warrantee.
S.A. Chap
2025-04-16 10:37:29
This fan worked great and is quieter than the original. I had to hire someone to install the wiring (it was confusing) but he got it working in a few minutes.Pictured is the 20 year old motor that was replaced.
matte michel
2025-03-25 12:13:44
Exactement comme décrit
Thinker-First
2025-03-08 10:24:55
Price and availability were a pleasant surprise.
Peetoon
2024-12-29 15:33:21
Bon prix et bon article
Recommended Products
$73.99
$ 35 .99 $35.99
$116.07
$ 50 .99 $50.99
$227.50
$ 99 .00 $99.00