Your cart is empty.
Your cart is empty.Product Description
FastCap Solo Thick Adhesive Refill (2.25 Ounces)
Amazon.com
This powerful adhesive refill was designed for FastCaps 2P-10 solo bonding kit. Use the thick adhesive with the respective 2P-10 activator to create long-lasting bonds in 10 seconds on most surfaces--including on porous materials such as particle board. Simply apply the thick adhesive to one surface and spray activator on the other. Pressing the two sides together creates a firm, permanent bond that holds up under all weather conditions. Bonds cure in approximately 30 seconds. The glue is also ideal for use on hard joints, as it wont clamp. To prevent glue clumps and clogs, a special no-clog cap seals the adhesive when not in use. The adhesive refill also comes in a protective hard-shell case. A two-part debonder is available from FastCap to dissolve a bond or to extricate excess glue residue for a clean, professional-looking final product. For the best results, store the adhesive in a cool, dry place. Avoid adhesive contact with skin and eyes. Apply on clean surfaces void of dirt, wax, and oils. This item weighs 1/4 of a pound. --Jessica Reuling
J. Michael Hitt
2025-07-24 16:25:36
This is going to be my 'go to' glue. You get quite a bit of glue for your money. It is strong, but if you goof and have to remove the screw you used it with, or whatever, I've been able to do it. So, it's strong enough to hold (probably permanently), yet if the need arises, and you have to uninstall the metal item that you used it on, you can, with hand tools and some effort, reverse the job. I also like the consistency of the gel. It tends to stay where you put it and not drip..not that it won't drip if you use way too much, but it hangs in there quite well. I've used it to repair just about every plastic shelf in my refrigerator and have found that it not only produces a fine, strong repair but if you are careful not to apply excess glue, the repair is almost invisible. I have two cons that have nothing to do with the glue. As you can see on the product photos, the container is tall and thin. This makes it prone to be knocked over, especially since the spout works the first time you use it but is unduly difficult to clean out and use again. So, you unscrew the cap, usually requiring a pair of pliers, and access the glue with a cotton swab, or whatever will fit. At that point you face the decision of whether to apply the glue which is then hanging on the end of your swab, or somehow set it down and screw the cap back on the bottle, then apply your adhesive. I've usually chosen the first option, which works great, except, careful as I am to put the bottle of glue out of the way, I've spilled it. It took 30 minutes to (about 5 minutes, post-spill) use various household cleaners, scrapers, and steel wool to remove it from my hardwood floor. However, the clean-up worked. I wouldn't dream of using acetone on most spills. It would most likely do the job, but the risk of surface damage would be high. The second 'spill' was purely due to my stupidity. I set the cap of the bottle right down on the hardwood floor but caught it quickly and in 5 minutes, the glue was gone and the floor was not damaged.Summary: Really great glue, obviously engineered to be strong, yet easy to use. It's 100 times better to work with than super glue (and I think as strong, or stronger). Con...the bottle is too easy to knock over. Whatever happened to the glue pots of yester-year? Finally, if you have a large bolt or some other heavy object that the glue bottle will just fit in, that will solve the spill problem, even a small wood clamp should sufficiently stabilize it.
D Eilenberger
2025-06-17 19:08:21
A crazy glue with body? This stuff really works and isn't runny like a lot of fast glues are. It sets very quickly (10 seconds working time, 30 seconds set time) and holds things like crazy. It's my new go-to glue. The top doesn't even glue itself on and so far - the hole in the tip hasn't blocked up. Cool stuff. Good price. I'm gonna buy a few more I think.
Richard G. Wison Jr.
2025-06-04 10:35:22
I bought this to use on vinyl laminate flooring when I have to replace a plank. But it is now my go to glue. Automotive, airplanes, boats, whatever I’m working on, this stuff is the magic sauce. The part may break again but it won’t be at the joint this glue binds.I even glued the soles of some old boots back together. This stuff is the Shiznat. Way, way better than super glue. In this picture is a mass airflow bracket. Just saved 100 dollars not having to buy the housing again. Tightened the bolts down. Held like Hulk Hogan had it in a head lock. Highly recommend for anyone that doesn’t want the joint to expand and needs it to last forever.
Chris
2025-05-26 14:38:19
I could stick an end table to the ceiling with this stuff! Worked great for building barn wood wood furniture and placing trim before using hardware!
Towing dude
2025-05-16 16:24:32
Quickly works on woodGood productShould buy the spray to set it quicker
Mr Mopar
2025-05-09 16:03:06
I’ve used 2P-10 for years and it’s an awesome and amazing product. I usually purchase the larger bottles if I’m doing a big project but there have been times that I end up not using the hole bottle and discarding the unused portion sometimes. But the price in the 2.1oz bottle is cheaper here on Amazon than in my local woodworking store. So it was more advantageous to purchase 6 , 2oz bottles then one big one and the cost of driving to my local woodworking store for just 1 item. Plus keeping the bottles sealed until I need them one at a time will lengthen my shelf life of the product.
Mark Vasko
2025-04-23 14:34:44
This is my go to for CA glue. Paired with accelerator, the glue bonds almost instantly and is strong for what I use it for
Steven
2025-04-13 11:39:26
I’ve used 3/4 different types of CA glue regularly over the years. 2P-10 is far and away the best. The CA glue I am used to sets instantly, giving you 0 seconds to make micro adjustments to trim in this case. You don’t actually get 10 seconds of workability, more like two or three, but that’s all you really need to make an adjustment to ensure perfect alignment and a durable hold.
Roger Tetrault
2025-03-23 10:18:16
C'est absolument ce que je voulais.
Paul
2025-01-27 17:51:01
This stuff is amazing on its own (without accelerator) as it doesn’t take long at all to create a solid hold. Good luck taking it apart! Lol
Louise
2024-12-18 13:26:54
Je l'adore
Edmonton
2024-12-14 18:25:58
Excellent service and product
Recommended Products
