Your cart is empty.
Your cart is empty.Product Description
Tinted Face Shields Replacement Lens Only
Package includes:
- Tinted Face Shields Replacement Only
Specifications:
- Material: Polycarbonate
- Net Height: 8 Inch
- Net Width: 15.5 Inch
- Net Thick: 0.04 Inch
- Color: Dark Green
Full Face Shield Compatible with Hobart 770580
Crafted from polycarbonate material, this protective full face shield can resist scratches, impacts, wear and chemical splashes. This face shield replacement is compatible with Hobart 770580.
Ideal for most workplaces, such as warehouses, offices, schools, constructions, industry.
Notes:
Manual measurement, please allow slight errors on size.
The color may exist a slight difference due to different screen displays.
Richard R
2025-09-01 18:44:27
Not much to say. Good quality. Thick but flexible. Nice and dark. Works fine. Recommended.
Kit McIlvaine (GirlPluggedN)
2025-08-18 13:58:08
Product is a good quality and value - it cut with good scissors and didn't crack. I had good visibility and great sun protection- good comfort for eyes without fogging. Would buy again.
Mr. Cynical
2025-07-18 13:20:40
Purchased these shields to create a visor for a costumery helmet. Pros and cons for fabricating your projects:PROS:1. Can easily cut into a rough shape using tin snips! The plastic will not shatter.2. Easy to shape using a heat gun. Warm until it begins to bow and then press into the helmet and hold in place. Wear a thick, geat-resistatnt glove like oven gloves.3. Shatterproof and robust! You're NOT going to accidentally crack this with saws, knives, drills, screws, etc.4. Bonds with super glue (cyanoacrylate). It takes a while, but it will eventually dry. I recommend using a cement compound that chemically bonds the plastics together.5. Nice and DARK - nobody will see your face through the visor.6. Perfect thickness - not to thick nor thin.CONS:1. Maybe a little TOO dark. This tint is perfect for outdoor applications. Indoor is a bit dim, such as in a convention center. If your helmet limits visibility on its own, consider anotheroption that is slightly less dark.2. Susceptible to fogging damage from cyanoacrylate super glue fumes. I initially glued the visor into my helmet to heep it in place, but noticed some smoky effects near the glue points. INSTEAD OF GLUE, I recommend building in some solid points in 3D prints for small screw holes. Better yet, embed machine screw nuts into the 3D print along with a hole and drill a hole in the visor for a short bolt. Use some thread fastener on it to ensure they don't come loose.
Landmark Joe
2025-07-17 15:27:20
So far so good for installing in 3d printed cosplay helmets.
Steve
2025-04-04 17:55:53
Works well for a mandalorian helmet + takes tint well.Can't speak on its safety specs, but I know other cosplayers may look at this and may be curious.
Mark a Santucci jr
2025-03-24 17:05:40
Good deal easy to cut I use them in prop helmets
TyCo
2025-03-19 17:09:50
This worked perfectly as a visor for a 3D printed Mando helmet! Was easy to cut to shape and looks great.
HK7335
2025-01-26 17:11:07
This is a great deal for a four pack. The ones I normally buy have a slightly green tint to them, I was very pleased to see that these are actually smoky gray color. Will definitely buy again.
Recommended Products
$268.78
$ 99 .00 $99.00