Your cart is empty.
Your cart is empty.FelPro gaskets offer 100% vehicle sealing with applicationspecific materials to give you sealing solutions with the performance and durability professionals trust
ted tracz
September 5, 2025
Fit perfectly, no leaks
Nikola Arutyunov
September 3, 2025
So far so good, all daugh it was not supposed to fit Toyota Camry 2003 it did fit and no more leaks
Josh E.
July 29, 2025
Nice to have around if you plan on removing the intake manifold on the 5vzfe. The orings are easy to tear on install so buy spares, though I’m not sure why they wouldn’t sell a pack of 13, the amount of total orings needed if you are replacing all the injector and fuel pressure regulator orings. Otherwise a good product.
JacobThe12
July 8, 2025
I initially ordered these as a backup set when replacing a fuel injector on my 2002 Tacoma, and did end up having to use them because the set from O'Reillys pinched due to a bad fit. These fit perfectly, and I never had any leaks. Will definitely order a set if I have another injector go bad again.
Jason L. Hurd
April 30, 2025
There are many incorrect o-rings available on amazon that say they fit the injectors but do not (05 subaru forester with top feed injectors)These worked great, just have to be careful not to squish them. Buy twice as many as you think you need.
Rene Sanchez
March 11, 2025
These fit really tight, and they will pinch really easy causing it to leak gas! Go to Toyota and buy the original ones. You don't want to risk anything with gasoline. For a few bucks you can burn your car.
William
February 25, 2025
Did not fit my Mitsubishi but I was able to work everything out with the seller and I'm happy with the customer service! So I recommend working with these guys for sure!
Jeff Griffith
January 26, 2025
These are in fact, the correct O-ring to use on my injectors, but they are a very crappy fit. They are a little bit too large, and with much persuasion you might be able to get them in but more than likely they will get pinched and leak fuel because they are too thick to fit correctly. Use lots of lube, and be very careful, installing the injectors into the rail with these O rings. I have ordered several of these kits, and they are all a bad fit, I suggest you buy the seals made by Mahle, those actually fit correctly.
Mulgath
December 11, 2024
The right orings for the job! Fit perfectly on my stock 2zz fuel injectors and stopped the drip that had developed.
Recommended Products
