Your cart is empty.
Your cart is empty.Genuine Fender Stratocaster guitar alder body routed for a traditional SSS pickup configuration and pre-drilled with six screw holes for vintage-style bridge mounting. Durable gloss-polyester finish. Crafted at Fender’s Ensenada, Mexico, manufacturing facility.
Christopher Aaron
2025-09-04 09:37:43
This body looks great, and the finished guitar is now my favorite in my collection, my prized possession. I used the neck from a beat up 2007 MIM Standard and it fit perfectly. I ordered the 005-469-000 Fender vintage bridge/trem and the screw holes were perfectly aligned. Keep in mind that the stock bridge from a MIM Standard or Player model WILL NOT WORK with this body without modification. The new bridge was around $25. The sound is better than the original body with the same pickups and electronics. The finish is flawless, no imperfections.I was quite pleased that Amazon offers an interest free payment option, so I was able to put $50 down with 4 monthly payments of $50. I’m probably going to use that to get the Telecaster body I want for a Partscaster build too.Summary; I LOVE THIS GUITAR! And it’s so much more valuable to me because I assembled it.
Rob
2025-08-24 14:29:58
Just perfect. The finish, the weight. Flaweless. Just Fender. Forget MIM or USA, minor details. Is Made in Fender 100%.Great service Amazon+Fender+DHL. Thumbs up!
Jack
2025-08-22 18:37:43
This body is very well built and the finish is flawless. The wood grain looks as if it was one piece even though it isn't. Comes in genuine fender box. My 22 fret usa maple neck fit perfectly without and modifications. It takes the vintage 2 3/16" bridge screw pattern so pay attention to that. Pickup cavities are tight so your wiring must be routed perfectly but that's a good thing in my opinion. The more wood left the better. My advise buy a genuine american standard fender pick guard and back cover. You need to drill your own holes and if you use a knock off pick guard as a guide to drill the body you might end up with a strange hole pattern and regret it later. It is full size thickness like the usa bodies should be. It's thicker and heavier then the newer mim strat bodies. Feels and plays just like a vintage American strat when built correctly. I absolutley love it !
Randy Sandoval
2025-08-17 14:22:11
Very nice guitar body and good delivery time
Gabriel A. Rheaume
2025-08-03 12:20:35
It’s a high quality Fender Stratocaster body. Everything fit like it should. Trem claw holes, b neck mount holes, bridge posts, and end pin holes are all pre-drilled. The output jack, trem spring cover, and pickguard are not.
David C
2025-07-18 13:04:59
Recently I decided to build my own guitar; having had Strats for years all store bought, I've learned to maintain them and keep them at their best. I have to say I was surprise with this purchased, it more than meets my expectations hence the 5 stars. The guitar is a vintage style body from 1999 (yes it is a 1999 as it is labeled) from Fender Instruments in Scottsdale Arizona. Very hard to find from this year. Some reviews says that it is misaligned, it is not. I have a 1999 American standard and compared it to this body and it matches perfectly, remember the offset is there for a reason.
Jim Anchower
2025-07-13 10:41:28
This is my second body, first one was just excellent I just needed a lighter one for build. I returned first and second one came in, just as excellent but the right weight for my needs.I have to say, the Fender products are just consistently excellent overall. You want the best, get the original. All parts I used are Fender and fit together perfectly, zero issues. Just spend the extra and get the Fender, it's worth it.
Joe Jr
2025-07-07 13:52:57
None of my parts fit on the guitar correctly. I don't not know if i got a defective one or not but i have the correct bridge with the correct spacing and i could not get it to screw in all the way. Also the right claw screw on the back was not screwing in easily. My loaded pickguard did not sit flush on the body as well and i do not understand why as it is SSS. Im upset and i hope my return will be fulfilled because i already drilled output jack holes. I was not expecting things to not fit and i was hoping to just drop everything in and screw it down, but that was not my experience.
cool
2025-07-01 13:47:16
Prisvärd
cool
2025-06-04 12:38:26
Snyyyggt
Franck L
2025-05-16 11:09:31
Bien que ce soit un corps fender, pb d'empatement avec le manche fender lui aussi..? Incompatible.
Walter
2025-05-13 15:28:42
Ottima qualità .Costruzione e finitura accuratissimi.Suono ben definito.Molto soddisfatto.
Yole
2025-05-05 11:22:50
Cuerpo fender precioso, acople con el mástil fender perfecto, embalaje de fábrica superprotector, los agujeros encajan con todas las piezas, ninguna queja
Christopher Aaron
2025-04-23 17:57:40
This body looks great, and the finished guitar is now my favorite in my collection, my prized possession. I used the neck from a beat up 2007 MIM Standard and it fit perfectly. I ordered the 005-469-000 Fender vintage bridge/trem and the screw holes were perfectly aligned. Keep in mind that the stock bridge from a MIM Standard or Player model WILL NOT WORK with this body without modification. The new bridge was around $25. The sound is better than the original body with the same pickups and electronics. The finish is flawless, no imperfections.I was quite pleased that Amazon offers an interest free payment option, so I was able to put $50 down with 4 monthly payments of $50. I’m probably going to use that to get the Telecaster body I want for a Partscaster build too.Summary; I LOVE THIS GUITAR! And it’s so much more valuable to me because I assembled it.
Rob
2025-04-09 17:58:22
Just perfect. The finish, the weight. Flaweless. Just Fender. Forget MIM or USA, minor details. Is Made in Fender 100%.Great service Amazon+Fender+DHL. Thumbs up!
Jack
2025-03-16 16:49:25
This body is very well built and the finish is flawless. The wood grain looks as if it was one piece even though it isn't. Comes in genuine fender box. My 22 fret usa maple neck fit perfectly without and modifications. It takes the vintage 2 3/16" bridge screw pattern so pay attention to that. Pickup cavities are tight so your wiring must be routed perfectly but that's a good thing in my opinion. The more wood left the better. My advise buy a genuine american standard fender pick guard and back cover. You need to drill your own holes and if you use a knock off pick guard as a guide to drill the body you might end up with a strange hole pattern and regret it later. It is full size thickness like the usa bodies should be. It's thicker and heavier then the newer mim strat bodies. Feels and plays just like a vintage American strat when built correctly. I absolutley love it !
Randy Sandoval
2025-03-10 17:19:36
Very nice guitar body and good delivery time
Gabriel A. Rheaume
2025-03-07 16:53:49
It’s a high quality Fender Stratocaster body. Everything fit like it should. Trem claw holes, b neck mount holes, bridge posts, and end pin holes are all pre-drilled. The output jack, trem spring cover, and pickguard are not.
David C
2025-03-02 15:42:34
Recently I decided to build my own guitar; having had Strats for years all store bought, I've learned to maintain them and keep them at their best. I have to say I was surprise with this purchased, it more than meets my expectations hence the 5 stars. The guitar is a vintage style body from 1999 (yes it is a 1999 as it is labeled) from Fender Instruments in Scottsdale Arizona. Very hard to find from this year. Some reviews says that it is misaligned, it is not. I have a 1999 American standard and compared it to this body and it matches perfectly, remember the offset is there for a reason.
Jim Anchower
2025-02-27 18:29:48
This is my second body, first one was just excellent I just needed a lighter one for build. I returned first and second one came in, just as excellent but the right weight for my needs.I have to say, the Fender products are just consistently excellent overall. You want the best, get the original. All parts I used are Fender and fit together perfectly, zero issues. Just spend the extra and get the Fender, it's worth it.
Joe Jr
2025-02-19 09:57:45
None of my parts fit on the guitar correctly. I don't not know if i got a defective one or not but i have the correct bridge with the correct spacing and i could not get it to screw in all the way. Also the right claw screw on the back was not screwing in easily. My loaded pickguard did not sit flush on the body as well and i do not understand why as it is SSS. Im upset and i hope my return will be fulfilled because i already drilled output jack holes. I was not expecting things to not fit and i was hoping to just drop everything in and screw it down, but that was not my experience.
cool
2025-01-17 11:30:06
Prisvärd
cool
2025-01-13 16:50:43
Snyyyggt
Franck L
2024-11-22 16:10:35
Bien que ce soit un corps fender, pb d'empatement avec le manche fender lui aussi..? Incompatible.
Walter
2024-11-21 11:34:31
Ottima qualità .Costruzione e finitura accuratissimi.Suono ben definito.Molto soddisfatto.
Yole
2024-11-18 09:14:27
Cuerpo fender precioso, acople con el mástil fender perfecto, embalaje de fábrica superprotector, los agujeros encajan con todas las piezas, ninguna queja
Recommended Products
