Your cart is empty.
Your cart is empty.The FIAMM Hidden Horns blend neatly with today's cleaner, sleeker boat designs. Made with top-of-the-line materials and workmanship, these USA manufactured horns will provide years of trouble free operation and the best sound quality available in the market. All FIAMM Marine horns meet or exceed ABYC, NMMA and Coast Guard requirements and are NMMA type accepted. This horn produces 125 dB at 4".
J. McFarland
2025-08-24 21:31:46
Not sure why so many users have issues with this horn. It installed for me with no issue and works as a horn should. Simply plugs into the existing horn wiring hot and ground. I reused my stainless grill and stainless screws. As for the manufacture including mounting hardware they have no idea what surface you're installing in/on so most omit hardware which is fine. If your going to work on boats etc have the hardware you need on hand. I rather source and use my own stainless screws of correct length for my application. Same for the template. Easy to use a tape measure and measure and mark where you need to cut. In my case it fit in the existing oval opening.
patrick lynch
2025-08-14 09:16:22
fast delivery , good value,I just in stalled it , it was a little larger than the original , I cut the hole out with an osculating tool it was easy, the horn does detach from the trim plate on the front if that will help , it is 12volt DC, it has 2 push on type connectors , the sound is deep tone, it is about 125 db at 20 ft, like a car horn,Enjoy
Sherry T.
2025-08-01 17:01:18
Good product
David H.
2025-07-30 12:39:50
It works great, but I did have to modify the hole, it looked identical to the one I had in the boat, but was bigger
Paulie
2025-07-28 10:18:11
nice finish & pretty loud for a small horn
Mauricio
2025-07-27 13:02:51
Just as expected
Ashley Brosious
2025-07-19 11:25:28
Bought this for my boat. Seemed to be a decent quality. I have had it for about 2-3 years now and still going strong. Fit into the existing hole perfectly, has a nice flush fit to the console. Very reasonably priced.
Larry Balowski
2025-05-30 10:05:27
No wireing diagram
Owen Bird
2025-05-18 15:44:47
Perfect replacement for our 19 year old horn that stopped honking.
Moisés C.
2025-04-14 15:34:27
Excelente artÃculo
Kunde
2025-04-13 17:33:44
Sehr gute Verarbeitung, sehr guten Regen Schutz und UV Beständigkeit
Robert Drew
2025-02-25 11:59:13
The box the product was in was totally crushed on arrival and the two little screws to hold on the face plate were missing
Kathy L
2024-12-30 15:14:02
Purchased to replace horn on 1999 270se Sundancer
Recommended Products
