Your cart is empty.
Your cart is empty.The FIAMM Hidden Horns blend neatly with today's cleaner, sleeker boat designs. Made with top-of-the-line materials and workmanship, these USA manufactured horns will provide years of trouble free operation and the best sound quality available in the market. All FIAMM Marine horns meet or exceed ABYC, NMMA and Coast Guard requirements and are NMMA type accepted. This horn produces 125 dB at 4".
J. McFarland
August 25, 2025
Not sure why so many users have issues with this horn. It installed for me with no issue and works as a horn should. Simply plugs into the existing horn wiring hot and ground. I reused my stainless grill and stainless screws. As for the manufacture including mounting hardware they have no idea what surface you're installing in/on so most omit hardware which is fine. If your going to work on boats etc have the hardware you need on hand. I rather source and use my own stainless screws of correct length for my application. Same for the template. Easy to use a tape measure and measure and mark where you need to cut. In my case it fit in the existing oval opening.
patrick lynch
August 14, 2025
fast delivery , good value,I just in stalled it , it was a little larger than the original , I cut the hole out with an osculating tool it was easy, the horn does detach from the trim plate on the front if that will help , it is 12volt DC, it has 2 push on type connectors , the sound is deep tone, it is about 125 db at 20 ft, like a car horn,Enjoy
Sherry T.
August 1, 2025
Good product
David H.
July 30, 2025
It works great, but I did have to modify the hole, it looked identical to the one I had in the boat, but was bigger
Paulie
July 28, 2025
nice finish & pretty loud for a small horn
Mauricio
July 27, 2025
Just as expected
Ashley Brosious
July 19, 2025
Bought this for my boat. Seemed to be a decent quality. I have had it for about 2-3 years now and still going strong. Fit into the existing hole perfectly, has a nice flush fit to the console. Very reasonably priced.
Larry Balowski
May 30, 2025
No wireing diagram
Owen Bird
May 18, 2025
Perfect replacement for our 19 year old horn that stopped honking.
Moisés C.
April 14, 2025
Excelente artÃculo
Kunde
April 13, 2025
Sehr gute Verarbeitung, sehr guten Regen Schutz und UV Beständigkeit
Robert Drew
February 25, 2025
The box the product was in was totally crushed on arrival and the two little screws to hold on the face plate were missing
Kathy L
December 30, 2024
Purchased to replace horn on 1999 270se Sundancer
Recommended Products
