Shopping Cart

Your cart is empty.

Your cart is empty.

Fieldpiece Dual-Port Manometer - SDMN5

Free shipping on orders over $29.99

$172.55

$ 78 .99 $78.99

In Stock

1.Style:Manometer


About this item

  • Dual-Port Manomete
  • 2 3/16-Inch tubes with brass fittings.Measure duct pressures to balance air flow.-60.0" WC to 60.0" WC range
  • 2 3/16-Inch to 5/16-Inch tube adapters - RMA316. Resolution down to 0.01" WC for static pressure measurement
  • 9-Volt battery (installed)
  • Operator's manual


The SDMN5 is a portable, rugged dual-port manometer designed especially for HVAC/R field service technicians. Measures gas pressure, static pressure and pressure differential. The SDMN5 includes a zero adjust button of the face of the meter, a rugged rubber boot, a magnet on the back for hanging the meter during service, and the Auto Power-Off (APO) function conserves battery life. The SDMN5 measures pressure between -60inWC and 60inWC (Inches of water column) and -150.0 to 150.0 mBar. The SDMN5 also measures P1 or P2 pressure readings and calculates the difference between P1 and P2. Take static pressure measurements using the resolution mode of 0.01inWC or 0.01mBar. Includes 3/16” to 5/16” adapter for measuring gas inlet and outlet pressures.


Eddie
2025-08-13 16:19:27
I needed a manometer to read manifold gas pressures on 4 stage gaspacs for commissing. This works beautifully and cuts down on time as my old one was a single port.
Tavaris neal
2025-07-27 12:24:46
Easy to use and pretty straightforward tool.
David R.
2025-07-09 17:28:50
If you work in the HVAC field, then you know field piece is quality tools for the trade, this tool is mainly basic, but it still allows you to adjust the gas pressure and check the differianal pressures.
Eric P
2025-07-04 10:02:20
works as described
Evan Madigan
2025-06-15 15:46:03
For the money this duel port Monometer is perfect. Durable, accurate and all of the above. Perfect for Hvac
F. Weldin
2025-05-04 21:28:32
While most HVAC Techs are highly skilled in diagnosing refrigeration problems by measuring refrigerant pressures with sophisticated gauges, few know much about troubleshooting airflow problems using a similar technique (sad but true). This instrument can be used to measure air pressures throughout a duct system to identify restrictions and blower and appurtenance problems, much the same as they routinely do for refrigerant tubing, compressors and appurtenances.Accomplished DIY-ers should be able to master the art of ductwork troubleshooting (DON'T ATTEMPT REFRIGERANT WORK AT HOME, FOLKS - ESPECIALLY WITH THIS INSTRUMENT).
C
2025-03-15 13:29:34
Exactly what I needed, the static pressure probes in the picture were ordered separately
Dominic
2025-02-15 21:14:43
Easy to use, and very accurate.
Gustavo Aguirre
2025-02-07 15:39:08
Me gustó el producto
Logan
2025-01-22 18:12:07
It’s really good. Easy to use, accurate.Comes with two good length hoses and other useful stuff.Only con is for $200 it would like to see a light up screen and a case.
Josh Braun
2025-01-04 14:29:28
Works immaculately which it should given the price. Though it didn’t come with all the attachments I’d assume No complaints!
Kyle W.
2024-12-10 13:37:10
Works good
Brandon
2024-11-30 21:56:04
This fieldpiece works pretty good and fits into my tool pouch ok. the size could be smaller and there is no backlight which is inconvenient. The only thing this tool has going for it is the price. I had a Testo manometer before which is much smaller but a bigger price tag
Recommended Products

$1,955.85

$ 99 .00 $99.00

4.9
Select Option

$183.99

$ 78 .99 $78.99

4.4
Select Option

$255.46

$ 99 .00 $99.00

4.8
Select Option