Your cart is empty.
Your cart is empty.Product Description
Accuracy Ground Machinist Set
Overall size is within +/- .0003"
Flatness and parallelism are within .0003"
Squareness on all sides to within 0.0003"
Pairs are matched to a tolerance of 0.0002"
- Overall size - +/- 0.0003"
- Flatness and parallelism - 0.0003"
- Squareness - 0.0003"
- Matching tolerance - 0.0002"
Excellent Cross Drilling Design
The cross drilling design can be used efficiently of lower weight with maximum strength.
Premium Material
The blocks are made from accuracy grade tool steel hardened and ground on all 6 sides of block, heat treated and case hardened to HRC 57-62
2""x 4""x 6"" Blocks With 23 Holes
23 each 3/8 inch through holes (5 tapped with 3/8-16 threads and 18 untapped)
Caleb
2025-09-03 17:30:35
Bought these for a beater set. They work great for general set up. These are by no means ultra precise tool and die grade blocks, but they are excellent for general shop use. They all passed a caliper check, but don't expect a lab grade product.
George
2025-07-30 11:23:21
They perform as described. If you have never used these tools then you would not understand that they are like having multiple “other hands†lol. I will recommend these to anyone getting into somewhat precision metal working. These things are spot on with respect to dimension and thread sizes. Good buy.
CK
2025-07-13 15:18:31
Solid 2-3-4 blocks that measured dimensionally correct to .001" across all sides using a set of Mitutoyo 6" calipers. Came packed in enough preservative to survive several decades in a warehouse. No way they were rusting anytime soon.
Thomas A. Bell
2025-07-12 14:25:54
Blocks appear to be accurate enough for my use at a low cost.
ac2hetzjr
2025-06-20 20:51:39
2-3-4 blocks. Arrived on time just as described. .well within .0002" tolerance flatness and parallelism.
Kirk Reed
2025-06-06 11:41:23
Very precise for the cost
Stephen
2025-05-29 13:11:20
Great value. I always wanted a set and now I have 5. Great price. Each set is individualy boxed and each block is wrapped in oiled paper.
justin
2025-04-28 10:52:49
spent about 30 minutes getting crud and metal shavings out of the holes. Otherwise they are pretty solid appearing.update: got some of the greasey crud on my shorts. There is a lot more crud in the holes than I originally noticed.second update: spent a good amount of time cleaning them up, and they are great. I was curious and looked at prices on other 234 blocks, and realized these are only cheap cause they don't clean them up for you.
Mike h
2025-04-14 13:02:32
They seem a good value and work good
Jon
2024-11-30 15:21:44
Yep they work, accurate dimensions at least for a fabricator.
Recommended Products
$28.99
$ 12 .99 $12.99
$37.83
$ 19 .99 $19.99