Your cart is empty.
Your cart is empty.Product Description
2-5/16" Mounting Holes
- Max Operating Pressure: P = 3625PSI, T = 725PSI, A & B = 4350PSI
- Flow Rating: 11GPM (40 l/min)
- A & B Work Ports: 10 SAE O-Ring (7/8"-14) Thread
- Inlet Port: 10 SAE O-Ring (7/8"-14) Thread
- Outlet Port: 10 SAE O-Ring (7/8"-14) Thread
SAE O-Ring ports ensure solid seal and prevent blockages
Adjustable Relief Valve Range: 1500 to 3625PSI
John Pogue
2025-08-25 12:26:36
Very heavy duty and we'll built
rvjust06
2025-06-20 16:57:45
This worked great. The OEM replacement valve for my tractor was over $1,000. I figured I'd give this a shot. Took it right to hydraulic fitting shop to get correct fittings. The ports are close together but with two extension fittings they work perfectly. Saved me a lot of money and got rid of the cable style valve.
Gregory R Pate
2025-06-13 16:44:00
Excellent
Just Someone
2025-05-09 16:38:42
The port thread size is suppose to be 7/8-14 yet a standard hydraulic will not thread in to any of the ports.
nancygail
2025-05-05 20:42:32
Item received was exactly what we wanted. However it had one piece damaged in shipping/handling. Contacted the seller and they responded immediately asking for explanation. I sent pictures and asked for replacement of the one part. Since they do not have separate parts a partial refund was offered to off set our purchasing it.
Ollie
2025-04-06 10:10:15
Bought for my Oliver 1655 to work bucket works great, fittings are expensive to plumb but not the valves fault
scott anderson
2025-02-21 15:50:54
This valve came in and I was surprised at the levers with dust boots, solid shafts, two positions, lock nuts, along with N for power beyond or neutral as its called. I have read many folks complaining about thread size inaccuracy and I fell into a tail spin trying to get fittings as a #8 seemed to almost fit but as though it was galling or cutting threads, kept working it in and out and turns out whatever anodized type coating they put on it is pretty thick in the threads. I worked it out with some WD-40 and working that valve with a five mile grin on my face. Price cannot be beat, it does what its supposed to and most parts are available online as all these companies typically get from a few suppliers and tag them with their own name. For the money you cannot beat this thing, our local hydraulic place carries them and the 4 spool I bought is 670+ bucks SO bottom line, you get what your pay for sometimes and others you pay for what you get - ripped off! These valves rock, again the threads are not cleaned up well so you must put some effort into cleaning them and the power beyond plug is almost impossible to find, I got them at Summit with the round o-ring style, not the flat washer seal. Hope this helps others thinking threads are wrong!
Andrew Korus
2025-02-16 13:52:35
Used this to operate front and rear blade articulating plow. Great price compare to the local hydraulic gizmo dealer.
chad oram
2025-02-07 15:53:23
Used this remote to add extra hydraulics to an old post pounder. Worked as needed.
Yves Boulay
2025-02-04 10:12:08
elle ne convient pas avec ce que je veux faire , je vais devoir en acheter une avec 7 bobines au lieu de 6 bobines . Il manque une fonction . Je vais devoir l'a retourner cette semaine
Benoit Aubin
2024-11-21 11:06:13
Il n'y avait pas de connecteur Power beyond sleeve. Ca ne fonctionnait pas pour le mon Massey Ferguson GC1705
Recommended Products
$25.92
$ 12 .99 $12.99