G. Monk
2025-09-03 18:18:47
I used this while base camping at an event to heat my T4 and G6 Gazelles with my diesel heater. It did the job well. I did have to turn up the temperature level on the heater to heat both at the same time. It is the exact same size as the outlet on the heater so a coupler is required. This is a sturdy part that will get the job done.
Customer
2025-08-03 20:07:06
Seems to be of good quality. The valves stay in any position that you set them, even with the diesel heater fan at the highest settings. Would definitely buy again.
andranik g.
2025-05-10 10:41:57
Does what it was intended to. Only complaint is that the inlet side requires a small piece of hose to connect to the heater. Why not make it a slip fit so you can eliminate that piece? Quality looks like it’s 3d printed but does work as intended
Rafael
2025-04-25 14:46:54
Top
Steven H
2025-04-16 14:27:56
Seems like a great idea, but doesn't fit on the end of the heater, so I couldn't really get it to work as I intended to use it.
Lisa
2025-04-05 18:13:14
Used to split the heat from my diesel heater between the annex and the the tent of my roof top tent. Wife thinks the dog needs to be heated when camping. It works and allows you to restrict the flow on each leg of the "y" split. Seems well built/decently priced for what it is.
Steve Garner
2025-03-05 10:11:24
this makes a big difference in controlling where I want my heat goes in my class c rv
William J Jr.
2025-02-16 13:38:16
Was really hoping that this would fit on my 8kw heater as a diverter. No luck but same size. I can use foil tape to seal the two together but have to figure how to secure it in place. work in progress
Stu57
2024-12-24 16:42:06
Stands up to heater temperatures without any problems.