Your cart is empty.
Your cart is empty. Condition: New
Brand: Jetuplusllc
Manufacturer Part Number: 4864226X / 83500519
Fitment Type: Direct Replacement
Interchange Part Number: 33505-60011 / 83500519
New Shifter Repair Kit Fit For Jeep AX15：
1-Shifter Ball Seat
1-End of Stick Bushing
1-Shifter Boot
Fitment:
1990 thru 2000 For Jeep Wrangler, For Cherokee, For Grand Cherokee, For Dodge Dakota
For Jeep AX15 AX5/ For Toyota R151 Transmission Shifter
ëìá øò
2025-09-05 12:22:00
Fit was exact on the AX15 shift tower, good value and shifts silky smooth after an easy install. Quality product, with good performance.
Nighthawk156
2025-08-31 16:13:15
This was an incredibly easy fix for our vehicle. We had been having trouble shifting gears in a manual jeep. Accessing the area this goes into was not difficult and the replacement process itself wasn't to hard. The quality of the product was great and the vehicle is able to be shifted without effor for a smooth ride. Great value for our money versus other potential fixes. Would highly recommend.
Rick Purvis
2025-07-25 13:37:30
Fit perfect in my 1995 Cherokee xj.
Chad Willson
2025-07-13 17:46:30
Seal and plastic cup fit in my 91 yj with 4.0l and the ax15, 5speed manual.Was having issues with it getting stuck in gear, seemed to have made a difference.
Customer
2025-07-10 11:26:52
The shifter bushing and top seal worked great. The small bushing though that goes on the shifter rod was too large and did not snap on the lower ball of the shift rod and fell off. I used the old piece for this portion. Other than that, good cheap kit that worked well
N.G.
2025-05-08 19:27:31
Material seems good quality - rubber boot feels like decent flexible rubber not hard cheap plastic-y trash.The blue gasket / seal type also seems quality.I installed the blue lower bushing / seal piece dry and then put the stick in liberally coated with silicone grease. Put a little on the end of the shifter stub and worked the boot down until it seated. Squeezed the rest of the small tube of silicone grease in and worked it around.Expect smooth shifting - no road time yet - based on the apparent quality of the materials.
BigW
2025-03-20 18:14:42
Perfect replacement
justin gable
2025-02-22 13:55:34
After a lot of struggling trying to get the retaining collar to spin to the lock position, I finally realized that the blue bushing was "too tall" therefor not allowing quite enough room for the slots in the collar to spin past the two pins in the shift tower. I was able to get it to work by sanding some off the bottom "black part" a little at a time until it worked. This was on an ax15 transmission and all the parts were very clean. I did not use the dust boot or small bushing.
Customer
2024-12-27 09:44:38
Upper seal seems slightly smaller then original but does seem to fit .Lower combo seal fits great under the stub shaft , did not use the hard plastic insert mine was fine .Price is excellent .Quite satisfied
Recommended Products
