Shopping Cart

Your cart is empty.

Your cart is empty.

Fluke TL175E TwistGuard Double Insulated Silicone Test Lead Set with Removable 4mm Lantern Tips, 2mm Diameter Probe Tips

Free shipping on orders over $29.99

$45.99

$ 21 .99 $21.99

In Stock

About this item

  • Twist guard, adjustable tips enhance safety and versatility length; Includes removable 4 millimeter lantern tips that thread onto the lead tip
  • WearGuard indicator shows damage to leads
  • Heavy duty strain relief withstands over 30000 bends
  • Probes always show the correct category rating for tip being used
  • 1 year warranty


TwistGuard test leads offer adjustable length test tips for use in different measurement environments. Includes removable 4mm lantern tips that thread onto the lead tip. Fluke TL175 is the only test leads as tough as your meter. Patented TwistGuard extendable tip shroud meets the highest electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurements. New WearGuard lead wire wears indication. Each test lead is covered by two layers of silicone insulation; Inner contrasting color is exposed when the leads are nicked, scuffed, or otherwise damaged and in need of replacement. Double Insulated Silicone leads. TL175 test leads withstand high temperatures and remain flexible in cold temperatures. Extra heavy duty strain relief on both probe end and plug end, tested beyond 30,000 bends without failure. Universal input plugs are compatible with all instruments that accept a standard 4 mm shrouded banana plugs. Probes always show the correct category rating for tip being used. Exposed probe tip length: 19mm to 4mm (0.75inch to 0.16inch). Ratings: CAT II 1000V, CAT III 1000V, CAT IV 600V, 10A maximum, Pollution Degree 2. Environmental ratings: 20 to 55 degree C (4 to 131 degree F), altitude: 2000m (6,562ft). Conforms to EN61010 031. 1 year warranty.


Tennessee Phil
2025-08-08 14:49:54
Fluke makes the best meters and probes. This is a great probe with retractable tip. The leads are very flexible, and they don't tangle. Highly recommended for use with Fluke or other meters.
W. Mayhew
2025-05-29 10:55:46
You get what you pay for, and these test leads are worth the price. These test leads are well made and incorporate mechanical safety features which should reduce the risk of making body contact with dangerous voltage. The double layer insulation of leads should assist in spotting any cracks in the outer insulation when the white inner layer shows through. I found the leads easy to use, thanks to the supple leads and sharp probe tips. Note that your meter needs to have the recessed safety type female banana jacks to accommodate the safety skirts around the male banana plugs on these test leads. Most decent meters manufactured since the late 1980s are made that way,
Jim
2025-05-24 12:54:42
I purchased these leads to replace an old lead set I have had for years. They are going to be used with a Fluke 77 series 1, the first meter I have ever purchased back in 1984. It is still accurate and performs very well for what I use it for. The old aftermarket leads have outlived their service life, upon inspection, the old leads were brittle and dried out, they also snapped in half when flexed near the banana plugs, they were immediately destroyed and discarded for safety concerns. These leads are the typical Fluke quality. Red and black with banana plugs at one end, with metal probes on the other end. The probes also feature a twist barrel that rotates to extend a plastic cover over most of the metal portion, leaving just a small section of metal exposed to take meter readings, a new safety feature introduced to make reading high voltages safer. The leads are made from silicone and are very flexible when in use and comfortable taking readings. They incorporate the standard Fluke quality in their construction and the dependability one has come to expect from the manufacturer.
Very happy with this purchase!
2025-05-05 13:21:21
Excellent quality, just what I needed, very happy with this purchase.
G. Williams
2025-04-27 15:28:32
They work perfectly. These are a nice add to my test equipment.
Messy
2025-04-23 12:08:28
Checked the ohms on both new leads.Red lead = 0.0000Black lead = 0.0001. None of the work I’m currently doing gets to that level of accuracy, these are a major improvement over my previous 15 yr old leads. I would buy these again.
Scott W
2025-02-08 13:52:35
I've always used the TL71 leads that came with my Fluke meters. They are pretty good leads, particularly when compared to what comes with cheaper meters. But these 175's blow them away!First, the "Twistguard" feature is really nice. I thought it might be a novelty, but it is really useful and has me completely sold on the 175's. I have experience shorting out components when probing a congested board, and deploying the 175's guards prevent that. The "guards" are quick and easy to deploy/retract, and always available so you don't have to go digging through a drawer to find them as you do with the "snap on" ones that come with other probes.Second, the 175's wire has silicone insulation, so SUPER flexible with virtually no "memory". The 71's aren't horrible (PVC?), but always have a few bends and kinks that never go away. The 175's are fantastic, no bends or kinks.The 175E (with the E suffix) comes with some screw-on barrel connectors that essentially convert the probes into lantern-type Banana plugs. I don't see ever using them (I have plenty of banana-to-banana jumpers if needed). So if you can find the plain 175 (without the E suffix) for a few bucks less, I recommend going with those.
paul
2025-01-24 14:33:15
I got these because I read a review that they didn’t get stiff and coil or bend when it gets cold. Even around 40-50 the regular cheap leads get stiff and annoying.I put these to the test in -30 in Montana and they worked beautifully. Stayed perfectly flexible with no stiffness at all.
Thony stark
2025-01-13 10:58:21
Produit original et livraison rapide. Top
匿名さん
2024-12-26 11:15:41
私の購入品が偶然にも悪いものに当たったのだと信じたいですが1回目に購入したものはテストリードを短絡させると5~10Ωほどの抵抗値を示し、プローブの下部を押したりすると抵抗値が0付近にまで下がる症状を繰り返し測定精度に影響したため廃棄。2回目の購入品は赤色プローブの導通が出ず断線しているようで返品しました。フルーク製品にはマルチメーターで絶大な信頼があったためとても残念な思いをしました。
yves LAYEZ
2024-11-28 15:14:41
normal c'est du FLUKE cordons silicone protection des embouts rotatifs très bonne manufacture rien a redire pour moi c'est nickel
florin gabriel iacob
2024-11-27 12:32:15
Ok
Oscar
2024-11-22 10:31:33
Comprati per mio suocero che è un professionista.. a detta sua sono ottimi e competitivi nel prezzo.. tutto quello che serve ad un artigiano 🦾🦾
Recommended Products