Your cart is empty.
Your cart is empty.OEM Ford In Dash Trailer Brake Control Module UnitPt# FL3Z-19H332-AAAlt Pt# FL3Z19H332AAFits:2015 Ford F-150Vehicle Must Be Equipped With Trailer Tow Package or Max Trailer Tow Package (Wiring) For Unit to Be Functional Will Require Your Local Dealer to Program / Flash in Order to Work.
Heather S.
2025-08-11 17:44:20
It was as simple as removing the plastics (watched a YouTube video on how to do it) plugging in the brake controller and then using forscan to update the software to tell the truck that it had a brake controller. Whole thing took about 45 minutes and most of that was waiting for my free trial of forscan. It was a bit more pricey than the cheap knockoffs but I haven’t had any issues with a dead battery like people were reporting with the cheaper ones.
DP
2025-07-31 16:17:06
Perfect oem part from Ford. Easy install. Quick Forscan update required so buy the adapter, too. Very easy with a pc.TIP - AVOiD the cheaper similar items from china (you can tell if the Ford part number sticker is missing in photos) - the cheaper parts install and setup exactly the same but my 2020 F150 XLT had a dead battery the next day. I returned and re-ordered only to have dead battery again. So, then I bought the Ford OEM part and no problems!! This is an easy upgrade if your truck has the tow package because all wiring will be there. (Without tow package, you might be missing harness - easy to check before ordering this part. You will also need the 30amp fuse.)
Kyle
2025-07-16 14:13:06
Products fits and works as intended. Took maybe 2 hours to install, but half of that spent figuring out how to get my laptop to "see" the truck in FORScan. The rest was pulling apart the dash and putting it back together after the controller is plugged in. Once FORScan is properly connected, the computer part of the install is pretty simple. Youtube is your friend. With FORScan working, there are a number of other features on your truck you can enable as well!
Randy B
2025-06-11 13:16:53
I bought this brake controller and installed using Forscan. The manual controls never worked? The brake controller did work partially. Now I am experiencing Battery drain when the truck sits for a few days.Getting the Brake Module Fault message on the dash. I am wondering if this was in fact a OEM part?
Jerry Ridgeway
2025-05-16 10:28:49
Installed it myself activated it with forscan and it works like it should.
N G
2025-04-28 12:59:49
Physical Installation is surprisingly simple. Wire harness that connects directly to this was already in my truck. This unit even came with the factory fuse that is an odd size and a little harder to find.2 Very important things to know:-If you don't already have a working factory brake controller you must check your f150 to ensure that it has wiring for a fuse, in fuse slot #24. If there is no wiring in that spot then your truck is not pre-wired for this, which will make installation much more difficult. I have heard of trucks WITH a tow package but no wiring in this spot.-Once you install this you need to activate it through the truck's computer. I used Forscan to activate it, once I had a working OBD II adapter with the proper BUS on it I was able to do it in 5 minutes. Otherwise you will have to go a dealership to activate it. I spoke to my dealership and they told me it couldn't be done because I didn't have a tow package. I was able to however get it working with Foscan.
AC
2025-02-28 11:15:56
It is what it is - expensive little switch but it makes the trailer brakes work
Laurence French
2024-11-14 16:49:38
must have tailer tow package on truck
Recommended Products
$34.99
$ 17 .99 $17.99