Your cart is empty.
Your cart is empty.Product Description
FOSHIO 2 Pack Mini Squeegee Window Film Tools
Product Specification:
Name: Rubber Squeegee Bigger squeegee Size: 4×2×0.6inch (100x50mm) Small squeegee size:2×2×0.6inch (50x50mm)
Material: Yellow rubber Application: Window tint film installing, wallpaper installing, vinyl and decal installing Feature:Perfect for glossy vinyl and all vinyl Applications and no Scratch leave on the vinyl surface
Package Included: 1PCS Rubber squeegee with size 4×2×0.6inch 1PCS Rubber squeegee with size 2×2×0.6inch
Perfect for removing moist liquid, wrap the film more efficiently.
Bevel design, easy to be fit for the surface of applying things.
Two size of rubber squeegee, meet your needs.
Soft rubber material is ideal for vinyl wrap film installiation those detail work, drive the air inside away and leave no scrathes on the film.
Miss Thing
2025-08-09 12:53:50
Arrived fast, affordable, well-packaged. I bought these because I was putting privacy cling film on a window, though I also expect to use them for vinyl wall clings as well. I've done both window film and wall vinyl projects in the past. I always used a credit card to smooth out the bubbles, and make sure everything clings properly. It worked, but it took time.But now I have FOSHIO Mini Squeegees!! I honestly wasn't expecting to see a great deal of difference between using a credit card and these little squeegees -- and I was so wrong! Smoothing the film and pressing out bubbles was so easy with these things!! It took hardly any time and was twice as effective. The secret, I think, is that while the rubber (or is it silicone?) on these is firm, it has some give. This allows for more of a sliding motion, rather than a scraping motion.These are affordable, and make what can be a difficult job much easier. Highly recommend!I don't receive products for my reviews - I write them because I read and appreciate *your* reviews. If I've been helpful, please click below! Thanks!
L. H. Soto
2025-07-17 12:57:16
These two items are perfect. they allowed me to lay down some Scotchgard film, wipe away water with little effort, and smooth out the install, to where I couldn't even tell there was a film on the bumper. They are not cheap, but are well worth the cost, if you want to do a quality job and have it right the first time. The film product I was using cost $120 and dealer wanted $80 to install. I spent $10, was careful and patient with the install. Net result, this has already paid for itself in savings.
Coffee
2025-06-26 21:07:13
Its effective and nice quality. It just stinks really bad like dry erase markers. Other than that, it helps with sticker applications without leaving scratches or streaks. I keep it in a baggy to contain the smell. Might need to get rid of smell by leaving it in fresh air.
kyboy1982
2025-06-19 12:20:33
I clean my windows with it and so far they work good
Gregory C. Pruitt
2025-04-23 17:15:39
The media could not be loaded.
Craig V. Halcromb
2025-04-19 09:05:29
I bought this product to help with my new hobby of 3D printing. My printer came with a hard plastic tool to clean the Vat but after doing some research it's not recommended to use the hard one. So, this product is ideal.
Jeff N.
2025-03-12 16:38:53
these are amazing - they are very precise. Don't even shop around, just buy these. Did my entire Jeep JL with these 2. I also bought the hard blue squeegees on here with the felt strip. Those are needed for when you need to press hard but don't want to grab the film and make it stretch or slide. Use Johnson's baby shampoo and mix your alcohol and water and shampoo together. You can have a 2nd bottle with the water and alcohol only to rinse the slip solution out and make the edges stick. Use 2ml shampoo, 32oz distilled water, 8oz of 70% isopropyl alcohol. I used this for 95% of my entire job. leave out the shampoo for a mix that make the PPF stick immediately. Also buy the 3m scotchgard PRO!! I wouldn't pay for the xpel and don't buy a cheaper version of 3M.
Customer
2025-02-15 17:55:56
Great product! use it to clean the resin vat on my Anycubic 3D printer!
Manju Dangalle
2025-01-18 10:00:47
It works very well. I will buy again
Rene
2025-01-07 18:23:56
Huelen muy feo pero me sirven para lo que ocupo
Justin
2025-01-06 10:52:15
I got this to clean the vat on a resin tank.It's stiff while being scratch freeðŸ‘
Cliente de
2025-01-05 13:18:31
Buen producto aunque el precio me parece elevado.
Rocky Waves
2024-11-12 15:06:38
Bought these squeegees few days ago for my DIY car wrap project. Worked great! The big one is good for working on the big area, the small one is good for edging and detailing. Highly recommended!
Recommended Products