Fuel Injector Tester and Fuel Injector Cleaner Tool Kit, 4 Sizes Adapter 8 Pulse Modes DIY Cleaning Tools Kit 12V Fuel System Diagnostic Injector Tester

Fuel Injector Tester & Fuel Injector Cleaner Adapter Kit (4 Sizes)

The cleaning operation(as picture above) requires aerosol can of fuel injection cleaner(not included), injector connector (not included) and 12v DC battery power supply (not included). Please prepare these necessary tools before your cleaning.

Electrical Specifications:

Power supply : 12V battery or DC 12V (recommended 2A) power adapter

Working conditions: 0°C-40°C; relative humidity ≤80%

Storage conditions: -20°C-50°C; relative humidity ≤85%

Unit Size: 120*80*25mm, Weight: 0.34kg

4 SIZES ADAPTES (2 NEW ADDITIONS)

• 2 New Additional Specialized Sizes:

1. Adapter with threaded dedicated for BMW N-Series.
2. Medium size adapter (13 mm hole) dedicated for Audi/ Volkswagen.

• 2 Universal Sizes Adapters:

Large Size(14 mm hole) and Small Size(11 mm hole) works with any 12 - 24 V vehicle including cars, motorcycles, electric vehicles, ATVs and boats.

8 PULSE MODES

The fuel injector tester is designed with 8 PULSE MODES. The injector tester has more modes to help more fully identify injector stuck, leaking or burnt-out conditions.

• Mode 0: Standby state, no output
• Mode 1: Single Pulse Low Power Mode - The fuel injector tester cleaner will send out a pulse with a pulse width of about 255 milliseconds.
• Mode 2: Short Pulse Low Power Mode - The injector tester cleaner will send out 50 pulses with a pulse width of about 7 milliseconds.
• Mode 3: Long Pulse Low Power Mode - The injector tester will send out 100 pulses, and the pulse width is about 3.5 milliseconds.
• Mode 4: Continuous Pulse Low Power Mode - The fuel injector tester will output pulses continuously, the pulse rate is about 50 pulses every 1450 milliseconds, and the pulse width is about 7 milliseconds.
• Mode 5: Single Pulse High Power Mode - The fuel injector tester will send out a pulse with a pulse width of about 255 milliseconds.
• Mode 6: Short Pulse High Power Mode - The injector tester cleaner will send out 50 pulses with a pulse width of about 7 milliseconds.
• Mode 7: Long Pulse High Power Mode - The injector tester will send out 100 pulses, and the pulse width is about 3.5 milliseconds.
• Mode 8: Continuous Pulse High Power Mode - The fuel injector tester will output pulses continuously, the pulse rate is about 50 pulses every 1450 milliseconds, and the pulse width is about 7 milliseconds.

NOTE:

1. During the pulse output period, the MODE SET button is invalid, and the working mode can only be selected by pressing the PULSE button again to terminate the output.
2. The cleaning operation requires fuel injection cleaner(not included), injector connector (not included) and 12v DC battery power supply (not included). Please prepare these necessary tools before your cleaning.

• 40 inch Power Cord & 20 inch Test Lead

The length of power cord is up to 41.73 inch / 106 cm and its test lead is 20.15 inches / 51.2 cm, which is more convenient to connect and use. The wires are made of superior silica gel, which has better high and low temperature resistance.

• Short Circuit Alert & Polarity Reverse Connection Alert

Our fuel injector tester cleaner kit is deigned with short circuit Alert and power input reverse connection Alert function. When the fuel injector damaged or short circuit of the pulse output terminal, the power indicator light of the fuel injector tester will flash.

• Mode Lock Features

The mode lock function can be locked in the current mode to prevent mistaken touches and other operations from affecting the test results and ensure the uniformity of the test conditions.

NOTE

1. Before using this fuel injector tester, the engine of the car must be turned off.
2. Do not smoke or generate high temperature flames during the test.
3. Do not splash the fuel of the car on the hot engine parts.
4. Please use this injector tester in a ventilated place.
5. Wear qualified goggles please.
6. After the test is complete, all disconnected vehicle connections should be properly restored.
7. Always follow the warnings, cautions and related maintenance instructions in the vehicle maintenance manual.