Your cart is empty.
Your cart is empty.Product Description
Protective full face shield
Soft silicone frame, which can perfectly fit the face, suitable for most people's faces and provide long-term comfort.
Full-face The design ensures full protection from the head to the chin,
Manufactured with the highest grade anti-fog, anti-scratch polycarbonate and sealed with BPA-free grade silicone.
Can be easily wash and reused daily.
Reusable
Anti-fog technology
This face covering to be easily cleaned in many ways.
If you are on the go and need a refresher, just wipe with water.
It lasts longer, and stands up better against heat and cold than plastics.
Breathing holes for easy breathing
Soft silicone fit to the face
Elastic band for easy adjustment
Product details:
Material: polycarbonate + independent walking + nylon strap
Colour: Black
Size: 6.69inch*7.3inch*6.3inch
Applicable people: unisex
The package contains:
2×transparent protective face cover
Silverback
2025-08-19 15:54:45
I bought these for working under my car and grinding metals.First off, they're smaller than I was expecting. I didn't check the item size, but I expected this to go around my entire face. Instead, the bottom rubber part rests against the front of my chin and the top reaches just above my eyebrows.This wasn't an issue though; it provides full face coverage and is a pretty rugged shield.There is a vented rubber piece under the chin, but I still had issues with the mask fogging up almost immediately. I'll probably cut out the vented portion to allow some actual airflow in the mask, because the holes provided dont cut it.For the price, I can't complain at all though. These are a better quality than I was expecting and 2 masks for this price is ridiculously cheap.I would certainly buy them again if I ever needed more.
B. Pierskalla
2025-08-18 13:48:26
I use these w/o a filter when working under my vehicle. I wear contacts and safety glasses do not fully protect my eyes from falling debris. W/o the filter these do not fog and I can wear my contacts with no worries.
Kevin C
2025-08-12 18:20:35
I'm on my planer, drum sander and chop/table saws daily. It's effective at keeping things from hitting your face, which realistically is what it's for. BUT... I wear glasses, and it's at best uncomfortable, riding right against them and pressing them into my nose. It also has no filtration, and does fog up. You can modify it to fix the last two. Cut out a typical mask to fit and tape the piece in place. And drill more small holes down low and do the same - that kept it from fogging on me by increasing airflow. The view to the sides is distorted, but almost all face shields are anywhere around this price range. All in all it's acceptable with some work for what you pay for it.
Brass Monkey
2025-07-22 18:38:01
This thing fogs up faster than anything I've ever used.I can't pull this down and take a single breath.
Ginger
2025-07-21 16:27:01
I like this for mowing the yard when it’s not over hot. It does fog up if you are getting moisture from sweating doing a project. Although I did use it to scrape a popcorn ceiling. It worked. It fogged. I couldn’t wait to get it off but it did protect my eyes and face from the debris. I wash it with Dawn soap and it seems to help it to not fog up quickly the next wear time.
Kerry
2025-06-16 18:12:58
The face shield seems good, it's on the small size.
Eric Wilson
2025-06-11 14:00:38
These state that they are fog-proof, and while they didn't fog all the time they did often enough to make it noticeable. They are hot, because the airflow is very limited. If you wear glasses or have a longer face look elsewhere for a face shield. with glasses on it constantly felt like it wasn't sitting right, and that was amplified by the fact that pulling down over my chin made the top not seal well.
Wayne Ignatius
2025-06-09 18:57:14
This style of face protector is different. It not only covers the front of your face, but the sides as well. There are enough openings at the side and bottom that the mask doesn't fog up when you breathe. It wouldn't stop a 45 bullet, but for all ordinary hazards it seems sturdy enough to be good protection.
LizM
2025-05-31 18:13:36
La verdad con la limpieza profunda sufro mucho con el polvo, aunque me ponga mascarilla. Ya con esta mascarilla completa se acabo este problema. Hasta para bañar al gato es util, y asi librarse de los arañazos.Recomendado.
Luca
2025-04-26 14:32:57
Muy útil para evitar contagios
Silverback
2025-04-12 11:51:03
I bought these for working under my car and grinding metals.First off, they're smaller than I was expecting. I didn't check the item size, but I expected this to go around my entire face. Instead, the bottom rubber part rests against the front of my chin and the top reaches just above my eyebrows.This wasn't an issue though; it provides full face coverage and is a pretty rugged shield.There is a vented rubber piece under the chin, but I still had issues with the mask fogging up almost immediately. I'll probably cut out the vented portion to allow some actual airflow in the mask, because the holes provided dont cut it.For the price, I can't complain at all though. These are a better quality than I was expecting and 2 masks for this price is ridiculously cheap.I would certainly buy them again if I ever needed more.
B. Pierskalla
2025-04-02 09:02:33
I use these w/o a filter when working under my vehicle. I wear contacts and safety glasses do not fully protect my eyes from falling debris. W/o the filter these do not fog and I can wear my contacts with no worries.
Kevin C
2025-03-29 17:28:10
I'm on my planer, drum sander and chop/table saws daily. It's effective at keeping things from hitting your face, which realistically is what it's for. BUT... I wear glasses, and it's at best uncomfortable, riding right against them and pressing them into my nose. It also has no filtration, and does fog up. You can modify it to fix the last two. Cut out a typical mask to fit and tape the piece in place. And drill more small holes down low and do the same - that kept it from fogging on me by increasing airflow. The view to the sides is distorted, but almost all face shields are anywhere around this price range. All in all it's acceptable with some work for what you pay for it.
Brass Monkey
2025-03-27 17:40:42
This thing fogs up faster than anything I've ever used.I can't pull this down and take a single breath.
Ginger
2025-03-26 16:10:25
I like this for mowing the yard when it’s not over hot. It does fog up if you are getting moisture from sweating doing a project. Although I did use it to scrape a popcorn ceiling. It worked. It fogged. I couldn’t wait to get it off but it did protect my eyes and face from the debris. I wash it with Dawn soap and it seems to help it to not fog up quickly the next wear time.
Kerry
2025-03-20 20:08:43
The face shield seems good, it's on the small size.
Eric Wilson
2025-02-27 18:43:56
These state that they are fog-proof, and while they didn't fog all the time they did often enough to make it noticeable. They are hot, because the airflow is very limited. If you wear glasses or have a longer face look elsewhere for a face shield. with glasses on it constantly felt like it wasn't sitting right, and that was amplified by the fact that pulling down over my chin made the top not seal well.
Wayne Ignatius
2025-02-15 10:07:54
This style of face protector is different. It not only covers the front of your face, but the sides as well. There are enough openings at the side and bottom that the mask doesn't fog up when you breathe. It wouldn't stop a 45 bullet, but for all ordinary hazards it seems sturdy enough to be good protection.
LizM
2025-01-15 13:38:38
La verdad con la limpieza profunda sufro mucho con el polvo, aunque me ponga mascarilla. Ya con esta mascarilla completa se acabo este problema. Hasta para bañar al gato es util, y asi librarse de los arañazos.Recomendado.
Luca
2025-01-05 15:09:35
Muy útil para evitar contagios
Recommended Products