Your cart is empty.
Your cart is empty.Product Description
3 Lever Positions:
Lever Pointing Up = Fuel On
Lever Pointing Down = Reserve On
Lever Horizontal = Fuel Off
SPECIFICATION:
Total Body Length: 120mm
Straw Length: 75mm
Straw Diameter: 10mm
Mounting Bracket: 58mm
Mounting Bracket Holes: 40mm (Center-to-Center)
Fuel Outlet: 18mm
Mounting Bolt Dimensions: M6 x 1.0
When mounted, the fuel exits to the right!
OTOHANS AUTOMOTIVE
Note:
Package includes: 1 x fuel Petcock Switch.(Includes mounting parts)
Please be carefully check the goods appearance, size, shape before ordering, thank you.
Due to the difference between different monitors,the picture may not reflect the actual color of the item.
Rigorously Testing:
The parts testing program verifies the quality and performance of a range of parts via testing and inspection to identify high quality parts that are equivalent to OE parts in form, fit and function.
About our company:
OTOHANS Automotive brand specializes in manufacturing all types of auto and motorcycle accessories and related products.We have many years of experience in supplying accessories and parts.Over 11 years in business & 100,000 satisfied customers!
greg phillips
2025-07-19 18:10:23
Worked just as needed , replaced an old corroded one that was in my gas tank.
Gtwn Dean
2025-07-11 10:25:23
Fits and works as it should, I used my original hardware as the bolt head is a smaller size.
Paul P.
2025-07-05 13:37:36
took me about 5 mins to figure out what is blowing everyone's mind concerning these petcocks valves . 1 The new valve' mounting flange, where it bolts to tank, is approximately 1 mm thinner than OE valve' flange. 2 the bolts that come with the new petcock were way too long for my OE fiberglass tank. 3 the OE sleeved washers are "too tall" to use with the new thinner fuel valve' flange or the valve wont be held tight enough to compress the o-ring (that is the only thing that holds the fuel in the fiberglass tank). 4 use the new slightly shorter sleeved washer with your OE bolts and you will be fine or remove 1 MM from your OE sleeved washers sleeve height . Several people have mentioned using washers to make the too long bolts tighten up but that is NOT the issue. the issue is that the Petcock has to be clamped firmly to the tank to not leak. The tanks sleeved washers (shaped like top-hats) are what keeps any length bolt and washers from compressing the rubber o-ring. Pro tip: put anti-seize compound on your bolt threads and you wont strip your fiberglass bedded nuts out of your tank 10 years from now.
Xcaret Campos
2025-06-27 17:10:44
Works great the only thing I have to complain is that a 10mm barley fits on the right side so it was hard to tighten even with pliers.
jason n.
2025-04-14 11:48:44
This fuel tank petcock was exactly what I needed for my Honda 50. The fit was perfect, installation was quick and easy, and it works flawlessly—no leaks or issues. The build quality feels solid, and it operates smoothly. If you need a reliable replacement, this is definitely the one to get. Highly recommend!
Dione L Densmore
2025-04-10 16:47:27
It is hard to rate this product. Although it fits great and is exactly what I asked for, it took for ever to ship. Of course things happen that may not be the fault of the supplier, so that is why I can not rate the product bad.
Robert
2025-01-10 16:38:11
I started off my quest for a petcock by searching for the part on an oem parts supplier's website. 16950-GCF-671 is the part number for my early model CRF230F and it uses a 11.8mm x 3.55mm o-ring seal. I initially purchased a two pack petcock kit, here on Amazon, with the same part number listed. Practically every single major feature on this other petcock was wrong. The fuel hose connection was too large, the seal mating surface was too small, the inlet screen was too high(that would prevent the tank from fully emptying), and the included gasket was a flat rubber gasket that was too slim to create a seal. Thankfully, I found the petcock listed here and it is nearly identical to the oem one! I've only ridden with it for about 12 hours over the past four months but I have seen no signs of leaking and the valve still turns easily. I'm including comparison pics with my review so everyone can see the difference! Highly recommend the petcock on this listing!
amanda otwell
2024-12-20 13:44:47
Wouldve givin it 5 stars. Came fast and easy to install. Only issue with it it wont shut off. Constantly leaks. Other then that it would have been 5 stars.
Recommended Products
$14.95
$ 7 .99 $7.99