Your cart is empty.
Your cart is empty.DriveAlign Idler Pulleys provide OE-quality fit to passenger cars and light trucks, performing as a locked center tensioning pulley, an automatic belt tensioner pulley or an idler pulley.
Daniel Rumble
2025-08-15 13:45:34
Good quality oem replacement. Worked perfect on my 3rd gen Tacoma
Alex
2025-08-14 14:29:23
Installed this in my 2017 Tacoma. Top idler pulley. Works great and seems to be good quality. Hopefully it last awhile! My oem pulley lasted 80k.
Double E
2025-08-12 17:11:35
Worked for top left pulley on my 06 Tacoma 4.0 V6
Joe
2025-08-10 13:20:43
The quality was great and the pulley fit well. The only negative is the bearing was not completely flush which caused the pulley to wobble. My mechanic seated the bearing and reinstalled the pulley. Worked perfectly after a minor adjustment so my recommendation is to do a quick inspection prior to installation to avoid any issues and additional labor.UPDATE Jan 7, 2025: After replacing three pulleys I noticed I still had a slight noise issue. Further troubleshooting determined the used (cosmetic) pulley I purchased from this seller was defective (noisy). My first clue should have been the requirement to reseat the wobbly bearing. It's too late to return the pulley and I would not want this pulley to be reissued to another customer. I will purchase this pulley again new to avoid headaches. Lesson learned.
Kelly A Martin
2025-07-23 10:08:27
This part arrived in original Gates packaging with intact seal. All the markings on the pully match the Gates catalog. Working as it should after 3000 Mi.
Placeholder
2025-07-17 18:00:07
Doesn’t fit a 2008 Toyota Highlander 2GR-FE. It’s too wide and doesn’t allow it to spin
minhster
2025-07-08 17:09:38
Needed to replace my belt and decided to go ahead and replace the pullies while I was at it. Note to anyone doing it themselves, I thought I could just do it from the top, but it is WAY easier to get to these from the bottom.My engine made normal operating noises when idling, no squels or anything though so didn't actually think these would do anything, just wanted to change them while I got my hands dirty but after I replaced them, my engine idle was significantly quieter, so I guess I did need to change my pullies afterall, the old ones still spun just fine and didn't have any play but a fresh set helped. They're cheap enough that anyone doing a belt replacement might as well do these.
aaron
2025-06-13 16:54:10
As described good purchase
Keesha
2025-05-12 10:40:07
Fits exactly like oem and everything’s been running quieter than before
Greg Hunter
2025-05-02 19:12:00
Bought it for my 2003 4runner. Very easy installation and fixed the noise I was hearing from the engine!
J.G.
2025-02-19 18:35:26
Not Original Equipment quality, but it fit well and so far so good.
Brian A.
2025-02-15 16:08:08
Plug and play. Slightly wider than stock 2005 4Runner idler pulley, but works great.
Brad
2024-11-19 13:02:30
Swapped out two on my 07 Tacoma 4.0, perfect fit and haven't had any issues in the two months since
Recommended Products
$16.64
$ 7 .99 $7.99