Your cart is empty.
Your cart is empty.Gates Water Pumps are recognized in the industry for their durability, superior quality and are manufactured for worry-free operations for your vehicle. Every Gates high-quality new water pump is constructed with premium alloy materials and a 100 percent functional test of seals and bearings along with a 100 percent leakage test for both the casting and assembled water pump. Get industry best and a guaranteed OE-quality fit, with Gates.
scott jandreau
2025-08-20 17:36:56
Packed well, installed easily after removing several things to access the old one and remove. Check all your hoses and belt prior to work. Buy a thermostat and replace as well if anything needs replacing it’s much easier while everything is apart and already there. New water pump works great
BrycenM
2025-08-14 10:07:27
I purchased this water pump due to my old housing looking a bit worse for wear and weeping from the rear of the pulley. Installation was straight forward and the supplied gasket provided a leak free replacement.Make sure the gasket surface is clean from old gasket material. In my case the old pump had a RTV and paper gasket from the previous owner so a wire wheel was necessary. Remember to torque the bolts appropriately when installing and there should not be any issues with cracking / malfunctions.Waterpump torque specs : 17 ft lbs (204 in lbs)I replaced almost my entire cooling system when this was done. Links to other compatible parts below.Spectra Premium CU1193 Complete Radiatorhttps://amzn.to/3gCRuCYGates 21615 Lower Radiator Hosehttps://amzn.to/2ZP5lPAGates 23283 Upper Coolant Hosehttps://amzn.to/38DOvXODorman 902-306 Thermostat Housinghttps://amzn.to/38HZSODStant 45359 SuperStat Thermostat - 195 Degrees Fahrenheithttps://amzn.to/2O1uMIpCrown Auto - 53007978 Water Pump Coolant Tubehttps://amzn.to/38BkdF8*As an Amazon Associate I earn from qualifying purchases.
Dan'l
2025-07-18 10:56:46
Great buy, name brand for under $20?? This went on a '01 Cherokee 4.0L. I also bought a new Dorman 56398 inlet tube to make it a quicker install in the parking lot. Worked just great, about a 2 hour evolution, part fits like new works great no problems. Also bought thermostat housing, stat, etc, but bolt felt like it was going to snap on removal so I left the old stuff in place. The swap without removing the stat housing is possible but it would be better to take the stat housing off if you can. The housing will impede your ability to get a clear view of the gasket surface which needs to be clean for a leak free job. Pump came with paper gasket, I used permatex to make sure we had no leaks. Housing bolts come out easy. As a suggestion - before you loosen the accessory belt, take the water pump pulley bolts off. That way the accessory belt will help hold the pump from spinning. Also, if you put a wrench on an adjacent bolt as well, you can use that extra leverage to keep the pump from spinning. Otherwise it's tough to get the pulley bolts off. Same on the install, tighten those after you have the accessory belt in place and tight.
Scott
2025-07-09 11:14:24
Fit perfect, came w a gasket in the box. Great price!
Todd Sanger
2025-06-28 18:14:44
The casting on this pump is flawless, and the impeller fits very snug in its place (I know press fit) but tight tolerances are kept between the pump body and impeller, and the shaft is nice and smooth on the bearings, so hopefully a long life will ensue, because face it, no matter how easy a pump is to change, you don't want to do it twice in short order ! Thank you Gates for a very good quality pump.
Daniel Padilla
2025-06-02 16:41:59
works
Randolph L Hunsinger
2025-04-08 18:56:29
Love Gates Parts
Royce Vaughn
2025-03-10 13:21:09
This is a quality water pump can't go wrong with a gates this is far better then vato zone or orileys have.
Thierry
2024-11-27 20:02:09
Me ha servido bastante bien.
Recommended Products
