Your cart is empty.
Your cart is empty.Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
Victor Morgan
2025-08-18 11:09:18
Works great perfect fit and good quality.
G&G Owner
2025-07-15 18:08:06
Gates makes good belts. Fit application correctly and priced reasonably.
Joe
2025-07-03 13:29:12
I got this belt for a 2019 Honda Odyssey and I can guarantee that it's the same size as the original and works great. It wasn't too bad to replace because I didn't have to move any items like covers or coolant reservoir out of the way. You do need a 17mm or 11/16" socket. I prefer to use a 12 point socket, that way the socket can be adjusted at a better angle. I also used a serpentine belt tool with a 3/8" drive. A longer socket also works better in this case. I had a short socket but used a 1-1/2" extension with it. This allowed me to clear the coolant line when adjusting the tensioner. I'd recommend removing the belt from the alternator pulley and also installing it on that pulley last. That way you can make sure the belt is on every pulley before adjusting the tensioner on it. I know the listing said it was made in Mexico, but the belt looked good, no visible stitching like the original belt that came with the car. I'm assuming it was made with an overlap which I think is a better construction. Overall, I'm good with it.
Tdubby23
2025-06-23 17:40:08
I replaced the serpentine belt while I was doing the timing belt/water pump replacement on my 2017 Pilot and this belt is a really good one to buy. It looks and feels just like the OEM one and is perfectly sized for the job.Use a breaker bar to loosen the tensioner, use a chart online to make sure you reroute the belt on install, double check the routing and also make sure to check for proper alignment of the belt around all the pulleys and you'll be good. It really is a pretty easy job. Good luck my DIY friend!
ACK
2025-06-06 19:23:36
Look to be of good quality. Very, very tight fit. Can be installed from the top without removing the wheel.
engineer
2025-06-05 10:55:47
UPDATE: didn’t last nearly as long as the original belt. BUT the exact replacement is the aramid version of this belt, rather than this poly version (my mistake for not reading the fine print.)Replaced factory belt because it was squealing. And looking at the wear indicator on the automatic belt tensioner, the belt was at the end of its life (1st picture.)Couldn't decide between Dayco, AC Delco, and Gates, so I got the Gates based on good reviews of other Gates serpentine belts. For some belts, the last 3 digits of the model number appear to represent the circumference of the belt. For example, the Dayco that's supposed to fit the MR18(DE) engine with A/C in the Cube, ends in 475, while the Gates ends in 473. I was concerned about these differences, but based on the wear indicator on the automatic belt tensioner after installing the new belt (2nd picture), it appears that the Gates belt is the correct length.The Gates belt appears to be thicker than the factory belt, and may have a different design. The original belt appears to have a fabric reinforcement right below the flat surface of the belt (3rd pic), but on the Gates belt, I only noticed the fibers running lengthwise beneath the flat surface (4th pic). I have no idea if either design is better, just something I noticed.I'm rating it at 4 stars for now, since I haven't really used it yet.
leroy
2025-05-20 12:04:24
Bought for volvo xc90 and had to remove a lot to install. Recommend replacing both pulleys, power steering pump if need, and water pump kit. They have to be removed and it's a pain.
BB
2025-04-02 21:07:10
Will buy again
Ruckus
2024-12-20 13:54:10
Great product
RDV in QC
2024-11-20 12:22:23
Needed to support an extra alternator on my RV
Recommended Products
