Your cart is empty.
Your cart is empty.Product Description
Specification:
NOTE: When pulling out the tape, please use gloves or pliers to pull it out, pulling it out with bare hands may accidentally hurt your hands.
- Material: low carbon steel
- Finish: electro-galvanized
- Length: 32ft(10m)
- Width: 4"(100mm)
- Thickness: 27 gauge (0.5 mm)
- Screw hole: Φ5mm accept for #10 screw
- Center spacing of screw holes:2½ inches (63 mm )
- Color: Silver
- Packing size:22x21.5x11cm
The Coiled Strap Tie is a continuous utility strap designed to resist tension and uplift loads. This coiled strap can be cut to length on the jobsite and used in post application.
Packing list :
- 32ft x 4" Wide Tension Steel Strapping x1
Tswoodshop
2025-04-15 13:18:38
This is just what I needed to reinforce my 2x4 and 2x6 wall studs to the top and bottom sills of my garage wall I'm constructing. I cut about 6 or 8 inches at a time, nail or screw the one end to the top sill, and the other end to the 2x4. I then bend/hammer the ends around to screw into the sides of the stud. That makes for a serious sturdy connection. Yes they make steel connectors for just that, but they are expensive when framing an entire garage. This method, while taking a little extra time to cut into sections, is less than 1/4 as costly. I love this item and will order more.
NK
2024-11-16 14:55:54
This is 100mm wide (~3.9in) and 10m long (~32.8ft). It is.5mm thick and comes in a continuous roll. The holes are well spaced and work with #10 screws. The holes are large enough to use metal zip ties. This is a heavy item that is well package that will keep the strapping still in transit. I have been invited to participate in the Amazon Vine program and it is my responsibility to offer an unbiased opinion. I hope you found this review helpful.
Recommended Products