Your cart is empty.
Your cart is empty.Product Description
GE continuous feed food waste disposer has a high RPM and high torque, to grind food finer and faster. Since select GE Disposall disposers can reach speeds of over 3500 RPM, while many brands can't reach over 2000 RPM, the Disposall disposers are less likely to jam. Stainless-steel dual-swivel grinder blades means they're less likely to corrode, even after years of use. The Disposall offers a faster and finer grind right from the beginning. Now you can be free from the anti-jam key and able to power through food the first time, so you don't waste time. E-Z Mount System makes installation a breeze for anyone. The five-step installation starts by attaching a sink flange assembly. Then, the disposer snaps onto the sink flange under your sink, allowing water and waste to safely travel down the pipes. And, the Disposall easily attaches to your existing plumbing and wiring. After a quick installation, you can trust that your Disposall was made with stainless steel and corrosion-resistant materials for maximum lifespan and durability. Drain boost technology helps keep your drain free and clear of food waste to ensure your water runs smoothly in the right direction. The Disposall has an angled fin which pumps water and ground food through pipes with higher speed and pressure to keep drains purged and help reduce clogs. All our models operate quietly and some even offer sound reduction technology. The sound reduction package includes a fully insulated sound shell, so our disposers can handle your toughest challenges while minimizing noise.
Amazon.com
Large-capacity continuous-feed food-waste disposal with 1/3-horsepower motor.
1/3-Horsepower Continuous-Feed Food-Waste Disposal
Helps Take Care of the Dirty Work
Send food waste down the drain once and for all with this large-capacity GFC325V garbage disposal by GE. The disposal's powerful grinding action reduces food waste to small particles, making the unit safe for any properly sized septic system.
Even more, the food-waste disposal features an advanced insulation package that helps ensure super-quiet operation, making it possible to maintain the cheerful, festive mood of a successful dinner party even during cleanup. Hardworking, quiet, and easy to install--the GE disposal makes a useful addition to any busy kitchen.
Convenient Design
Thoughtfully constructed, the food-waste disposal system also provides a two-level precutter, an on/off wall-switch with a sink stopper, a manual-reset overload protector, and a splashguard, as well as stainless-steel, jam-resistant, dual swivel impellers. Other highlights include cold-rolled carbon-steel armature shaft material, a stainless-steel sink flange, and a galvanized-steel turntable.
Easy-to-Use Continuous Feed
To operate, simply remove the sink stopper, turn on a medium flow of cold water, flip the switch to ON, and scrape in the food waste. The continuous-feed disposal takes care of the rest. Before turning the disposal off, let the water and the disposal run for about 25 seconds after the shredding and grinding stops to ensure all waste is thoroughly flushed through the trap and drain.
The disposal measures 5.19 inches deep by 5.5 inches wide by 12.69 inches high, and detailed installation instructions come included.
GFC325V At a Glance:
- 1/3-horsepower motor
- Large-capacity continuous-feed disposer
- Over 2500 RPM grinding action*
- Stainless-steel jam-resistant, dual-swivel impellers
- EZ mount installation
- Line cord power connection
- Standard sound-insulation package
- Cold-rolled carbon-steel armature shaft material
- Splashguard
- Wall-switch with sink stopper
- Manual reset overload protector
- Dishwasher drain connector
- Stainless-steel sink flange
- Galvanized-steel turntable
- 2-level precutter
* Based on RPM testing of cleared GE and competitive models
Drew458
2025-09-01 20:08:33
It's a garbage disposal. It's a GE. It's their middle range model. It does the job without costing too much. We don't do silly stuff like expect it to chop up pork chop bones, or just scrape our dirty plates into it instead of the garbage can, or pour hot fry oil down the hole. So it does what we ask of it, without a lot of noise. It does not shriek when it's empty like our old one did. Hook up was as easy as any other disposal. No leaks, no worries, it doesn't vibrate the steel sink. To be fair, we might use it a total of 5 minutes a day, and that's a lot. So we expect it to last forever. Another good product from GE. Happy customer.
M Seal
2025-08-24 17:25:10
I bought this as a replacement for an old garbage disposal and it fit perfectly. I had a friend install it for me and he was able to remove the old one and reinstall this one within minutes. Because we bought the same brand, just a newer version, we didn't have to replace any cables or fittings. Excellent disposal, very quiet and works great!
ECat
2025-08-22 21:24:37
This is an updated model of the GE sink-grinder that served me well for ten years but that I ruined by clogging it with tiny gravel from transplanting a plant in the sink -- not a smart idea, I know (now). Anyway, what is best about this GE model (and its predecessor) is how small and compact it is in comparison to other maker's 1/2 HP sink grinders. Those others were half-again to twice the size, as well as twice or much more in price. It installed very easily (by a plumber, not me) since I had had essentially the same model before and the attachment bracketing was the same. Although this updated model was described as having some significant sound baffling, a rarity at this low price, this new one sounds no quieter than the prior model. However, I don't think it's unreasonably loud at all, nor did I think the prior model was. In an exhaustive search at the Big Box stores and on line, I judged this to be the best because of its power, small size, relatively low price, and reliable maker. Oh, Amazon's price was 30% less than elsewhere on line or in brick and mortar.
Dawn Prince
2025-08-21 18:46:07
It was easy to put in and it’s not loud
Delores Mccrory
2025-08-17 15:33:40
I had this installed to replace an older model that was no longer functional. Installation took about 30 minutes because it is not corded, and it works perfectly. However, the collar to mount it was broken when my plumber opened it. He was able to use the old part from the previous model so I did not have to take the trouble to return it and wait for a new one. Not as loud as the previous one. Best price I found anywhere. Not giving 5 stars because of broken part.
Deb
2025-08-16 13:16:44
By getting the exact same model...I didn't have to redo the sink top part as I had no leaks! Yay!We just unscrewed the old broken Disposal and attached the new one.(After finally maneuvering & getting the 2 screws loosened.)*We could not get the 2 screws loosened where the PVC pipe inserted into the side of the Disposal...So, I loosened the ring on the PVC pipe itself and shimmed pipe out sideways, to have leverage to get the 2 screws out using a ratchet once out from under the sink.A regular screwdriver did not work. From the start, the grooves cut into the screws were VERY shallow and no type of screwdriver would stay in, to be able to turn them at all. (This was the most frustrating part of self install.) TIPS ~ So be sure to have the right sized ratchet.*For support to catch the old unit and prop up the new one...I used a Gallon Paint Bucket with lid on, to slide underneath disposal, so it didn't drop down and fall and break to anything or hurt my hand. It was a perfect fit to support under disposal. ;-)I think I could have installed the entire new Disposal had the 2 stubborn screws been able to unscrew! (I'm a female) I had to get my neighbor to come help me finish up. He couldn't get the 2 screws loose either.So, I showed him I had loosened the side PVC pipe, and to shimmy it out sideways once the metal ring was loosened on top of old disposal using a Screwdriver to loosen ring and drop unit down on top of paint can, then to finally pull it out from under the sink and work on it on the floor.Otherwise, it was super easy to replace and inexpensive to not have to call a professional. :)
goingairplanestyle
2025-08-09 17:00:52
I put this thing in 3 years ago and it shows no sign of failure. A very good quality material and strong. It chews bones, beer bottle caps! Try taking a look at it when you turn it on,,,, it might take you in it!
DeetDoot
2025-07-01 15:27:12
This thing was so easy to install! It works great. You should probably get one.
Harvey Vesty
2025-06-19 10:37:00
Very good value
uralikkandyjayarajan
2025-05-26 16:05:19
It is ok for a small family.The thing is that no where else there is no mention of the instrument working in 110-120 v 60hz cycle in the description of th product and it is misleading in the case of Indian custemer.The descrption of the product is not apt for Indian custemers.
Drew458
2025-05-22 12:58:30
It's a garbage disposal. It's a GE. It's their middle range model. It does the job without costing too much. We don't do silly stuff like expect it to chop up pork chop bones, or just scrape our dirty plates into it instead of the garbage can, or pour hot fry oil down the hole. So it does what we ask of it, without a lot of noise. It does not shriek when it's empty like our old one did. Hook up was as easy as any other disposal. No leaks, no worries, it doesn't vibrate the steel sink. To be fair, we might use it a total of 5 minutes a day, and that's a lot. So we expect it to last forever. Another good product from GE. Happy customer.
M Seal
2025-04-25 18:43:10
I bought this as a replacement for an old garbage disposal and it fit perfectly. I had a friend install it for me and he was able to remove the old one and reinstall this one within minutes. Because we bought the same brand, just a newer version, we didn't have to replace any cables or fittings. Excellent disposal, very quiet and works great!
ECat
2025-04-21 16:52:05
This is an updated model of the GE sink-grinder that served me well for ten years but that I ruined by clogging it with tiny gravel from transplanting a plant in the sink -- not a smart idea, I know (now). Anyway, what is best about this GE model (and its predecessor) is how small and compact it is in comparison to other maker's 1/2 HP sink grinders. Those others were half-again to twice the size, as well as twice or much more in price. It installed very easily (by a plumber, not me) since I had had essentially the same model before and the attachment bracketing was the same. Although this updated model was described as having some significant sound baffling, a rarity at this low price, this new one sounds no quieter than the prior model. However, I don't think it's unreasonably loud at all, nor did I think the prior model was. In an exhaustive search at the Big Box stores and on line, I judged this to be the best because of its power, small size, relatively low price, and reliable maker. Oh, Amazon's price was 30% less than elsewhere on line or in brick and mortar.
Dawn Prince
2025-03-31 21:01:00
It was easy to put in and it’s not loud
Delores Mccrory
2025-03-24 17:54:30
I had this installed to replace an older model that was no longer functional. Installation took about 30 minutes because it is not corded, and it works perfectly. However, the collar to mount it was broken when my plumber opened it. He was able to use the old part from the previous model so I did not have to take the trouble to return it and wait for a new one. Not as loud as the previous one. Best price I found anywhere. Not giving 5 stars because of broken part.
Deb
2025-03-21 16:12:02
By getting the exact same model...I didn't have to redo the sink top part as I had no leaks! Yay!We just unscrewed the old broken Disposal and attached the new one.(After finally maneuvering & getting the 2 screws loosened.)*We could not get the 2 screws loosened where the PVC pipe inserted into the side of the Disposal...So, I loosened the ring on the PVC pipe itself and shimmed pipe out sideways, to have leverage to get the 2 screws out using a ratchet once out from under the sink.A regular screwdriver did not work. From the start, the grooves cut into the screws were VERY shallow and no type of screwdriver would stay in, to be able to turn them at all. (This was the most frustrating part of self install.) TIPS ~ So be sure to have the right sized ratchet.*For support to catch the old unit and prop up the new one...I used a Gallon Paint Bucket with lid on, to slide underneath disposal, so it didn't drop down and fall and break to anything or hurt my hand. It was a perfect fit to support under disposal. ;-)I think I could have installed the entire new Disposal had the 2 stubborn screws been able to unscrew! (I'm a female) I had to get my neighbor to come help me finish up. He couldn't get the 2 screws loose either.So, I showed him I had loosened the side PVC pipe, and to shimmy it out sideways once the metal ring was loosened on top of old disposal using a Screwdriver to loosen ring and drop unit down on top of paint can, then to finally pull it out from under the sink and work on it on the floor.Otherwise, it was super easy to replace and inexpensive to not have to call a professional. :)
goingairplanestyle
2025-03-12 10:46:43
I put this thing in 3 years ago and it shows no sign of failure. A very good quality material and strong. It chews bones, beer bottle caps! Try taking a look at it when you turn it on,,,, it might take you in it!
DeetDoot
2025-02-25 16:11:17
This thing was so easy to install! It works great. You should probably get one.
Harvey Vesty
2025-01-16 18:48:23
Very good value
uralikkandyjayarajan
2024-12-30 14:19:29
It is ok for a small family.The thing is that no where else there is no mention of the instrument working in 110-120 v 60hz cycle in the description of th product and it is misleading in the case of Indian custemer.The descrption of the product is not apt for Indian custemers.
Recommended Products
$145.22
$ 71 .99 $71.99