Shopping Cart

Your cart is empty.

Your cart is empty.

Geekworm 16Pin 0.5mm Pitch PCIe FFC Ribbon Cable Set 30mm/50mm/80mm for Raspberry Pi 5 & PCIe to NVMe SSD Adapter

5.0 (8) Write Review
Free shipping on orders over $29.99

$6.00

$ 2 .99 $2.99

In Stock

About this item

  • Compatibility: 16Pin PCIe FFC ribbon for Raspberry Pi 5 PCIe extension, NOT compatible with Raspberry Pi Camera
  • Specifications: Pin number: 16 pin; Pitch: 0.5 mm
  • Different Lengths: 30mm / 50mm / 80mm FFC cable in one kit for convenient use
  • Packing List: 3 x FFC cables (length: 30 mm / 50 mm / 80 mm), 1 x M2 knurled nut, 1 x CM2x3 mm Screw
  • Tips: The M2 knurled nut and CM2x3mm Screw is used to fixed the SSD on PCIe to NVMe SSD adapter which has no SSD mount nut column. This method is not perfect, but it works


Product Description

FFC Cable

Note: the 15pin FFC cable is not support Raspberry Pi camera.

Overview

This is a FFC cable kit for the Raspberry Pi 5 PCIe interface. It includes 3 lengths, 30mm, 50mm and 80mm in length. According to our tests, the shorter the FFC cable, the faster the read and write speed of the SSD will be.

In addition, it also includes an M2 knurled nut and an M2 screw, which are used to help fix the 2230/2242/2260 SSD on the X1001/X1000/X1002. This method is not perfect, but it can solve some issue you encountered.

FFC Cable Specifications

  • Pin number: 16 pin;
  • Pitch: 0.5 mm;
  • Lengths: 30mm / 50mm / 80mm

Packing List

  • 1 x 30mm length FFC wire(same direction)
  • 1 x 50mm length FFC wire(same direction)
  • 1 x 80mm length FFC wire(same direction)
  • 1 x M2x4mm knurled nut
  • 1 x CM2x3mm Screw

Kevin Rickey
2025-06-06 18:31:40
Great quality flexible printed circuits. They are perfect. Thank You.
Ryan Bear
2025-06-04 13:06:56
Used the longest one since the cooler on the pi was a little tall and it was booting off of the nvme.
Murph
2025-06-02 14:27:37
Received a package with 2 30mm cables and an 80mm. One of the 30mm cables was previously installed in something. Didn’t care as all I wanted was to 80mm cable. I do mention it in case it happens to someone else and they specifically need the 50mm. Almost with they sold a 100mm flex because it was a tight fit in the case and getting the end properly seated and locked in was a bit of a PITA. ESD tweezers saved the day
wizwht
2025-05-21 16:07:25
I seen that this was for the pcie port on raspberry 5 and one of my mini computers had the same pcie except they were hooking it to an ssd. I found an nvme adapter, also from raspberry, that would fit in places of the ssd. Hooked it up and all good. I also had enough room to add a heatsink.
Nathan Laatz
2025-04-06 12:46:20
I have liked everything about this so far (2 days).It was accurate description on the web as to what was received. Granted I do not need the longer one or the shorter one. For my purposes the middle was just right. Seeing that sold alone would be of benefit to future buyers.
oscar q.
2025-04-02 12:27:43
Cumple su propósito
G
2025-01-22 19:33:18
To start, the longest cable didn't work at all. When the shorter ribbon cables were completely straight/flat, they worked, but as soon as they got even slightly bent (necessary to connect HAT or baseboard to the pi), the drive was no longer recognized. I tried all cables with the aforementioned boards without success. Bummer dude.
joey
2024-12-20 11:24:54
Works for my Raspberry PI 5 connection to external SSD circuit board and inexpensive solution.